ASTM E8 / E8M - 13a Standard Test Methods for Tension Testing of Metallic Materials


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A47/A47M Standard Specification for Ferritic Malleable Iron Castings

    A48/A48M Standard Specification for Gray Iron Castings

    A74 Standard Specification for Cast Iron Soil Pipe and Fittings

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

    A197/A197M Standard Specification for Cupola Malleable Iron

    A220/A220M Standard Specification for Pearlitic Malleable Iron

    A278/A278M Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)

    A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A411 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire

    A439 Standard Specification for Austenitic Ductile Iron Castings

    A447/A447M Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

    A476/A476M Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

    A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy

    A536 Standard Specification for Ductile Iron Castings

    A571/A571M Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

    A608/A608M Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

    A641/A641M Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire

    A716 Standard Specification for Ductile Iron Culvert Pipe

    A746 Standard Specification for Ductile Iron Gravity Sewer Pipe

    A823 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings

    A834 Standard Specification for Common Requirements for Iron Castings for General Industrial Use

    A842 Standard Specification for Compacted Graphite Iron Castings

    A856/A856M Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

    A874/A874M Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

    A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

    A897/A897M Standard Specification for Austempered Ductile Iron Castings

    A931 Standard Test Method for Tension Testing of Wire Ropes and Strand

    A942/A942M Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells

    A1007 Standard Specification for Carbon Steel Wire for Wire Rope

    A1034/A1034M Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

    A1056 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings

    A1058 Standard Test Methods for Mechanical Testing of Steel Products—Metric

    A1077/A1077M Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings

    B16/B16M Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B21/B21M Standard Specification for Naval Brass Rod, Bar, and Shapes

    B30 Standard Specification for Copper Alloys in Ingot Form

    B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar

    B42 Standard Specification for Seamless Copper Pipe, Standard Sizes

    B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

    B48 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors

    B49 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes

    B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed

    B69 Standard Specification for Rolled Zinc

    B75/B75M Standard Specification for Seamless Copper Tube

    B85/B85M Standard Specification for Aluminum-Alloy Die Castings

    B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

    B88 Standard Specification for Seamless Copper Water Tube

    B88M Standard Specification for Seamless Copper Water Tube [Metric]

    B98/B98M Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes

    B99/B99M Standard Specification for Copper-Silicon Alloy Wire for General Applications

    B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

    B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

    B103/B103M Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

    B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

    B121/B121M Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

    B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

    B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets

    B134/B134M Standard Specification for Brass Wire

    B138/B138M Standard Specification for Manganese Bronze Rod, Bar, and Shapes

    B139/B139M Standard Specification for Phosphor Bronze Rod, Bar, and Shapes

    B140/B140M Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

    B150/B150M Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

    B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B159/B159M Standard Specification for Phosphor Bronze Wire

    B160 Standard Specification for Nickel Rod and Bar

    B162 Standard Specification for Nickel Plate, Sheet, and Strip

    B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

    B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

    B165 Standard Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube

    B166 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,

    B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an

    B168 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,

    B169/B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

    B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

    B176 Standard Specification for Copper-Alloy Die Castings

    B188 Standard Specification for Seamless Copper Bus Pipe and Tube

    B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B196/B196M Standard Specification for Copper-Beryllium Alloy Rod and Bar

    B197/B197M Standard Specification for Copper-Beryllium Alloy Wire

    B199 Standard Specification for Magnesium-Alloy Permanent Mold Castings

    B206/B206M Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire

    B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

    B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

    B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

    B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire

    B251 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

    B251M Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]

    B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

    B272 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

    B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

    B283/B283M Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

    B301/B301M Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes

    B302 Standard Specification for Threadless Copper Pipe, Standard Sizes

    B306 Standard Specification for Copper Drainage Tube (DWV)

    B315 Standard Specification for Seamless Copper Alloy Pipe and Tube

    B335 Standard Specification for Nickel-Molybdenum Alloy Rod

    B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

    B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets

    B351/B351M Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application

    B352/B352M Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application

    B353 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)

    B359/B359M Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

    B360 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications

    B365 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire

    B367 Standard Specification for Titanium and Titanium Alloy Castings

    B370 Standard Specification for Copper Sheet and Strip for Building Construction

    B371/B371M Standard Specification for Copper-Zinc-Silicon Alloy Rod

    B379 Standard Specification for Phosphorized Coppers—Refinery Shapes

    B381 Standard Specification for Titanium and Titanium Alloy Forgings

    B386 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil

    B387 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire

    B392 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

    B393 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate

    B394 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes

    B395/B395M Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

    B408 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

    B411/B411M Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar

    B425 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar

    B427 Standard Specification for Gear Bronze Alloy Castings

    B441 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

    B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy(UNS N06625) and Nickel-Chromium-Molybdenum-SiliconAlloy (UNS N06219) Plate, Sheet, and Strip

    B446 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar

    B447 Standard Specification for Welded Copper Tube

    B453/B453M Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

    B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

    B462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,

    B465 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B466/B466M Standard Specification for Seamless Copper-Nickel Pipe and Tube

    B467 Standard Specification for Welded Copper-Nickel Pipe

    B473 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

    B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

    B475 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire

    B476 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

    B489 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals

    B493/B493M Standard Specification for Zirconium and Zirconium Alloy Forgings

    B502/B502M Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors

    B505/B505M Standard Specification for Copper Alloy Continuous Castings

    B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

    B511 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

    B523/B523M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

    B534 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B540 Standard Specification for Palladium Electrical Contact Alloy

    B541 Standard Specification for Gold Electrical Contact Alloy

    B543/B543M Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

    B550/B550M Standard Specification for Zirconium and Zirconium Alloy Bar and Wire

    B551/B551M Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

    B552 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants

    B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

    B563 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy

    B564 Standard Specification for Nickel Alloy Forgings

    B569 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing

    B570 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions

    B572 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

    B573 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod

    B574 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten

    B581 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

    B587 Standard Specification for Welded Brass Tube

    B591 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar

    B592 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B595 Standard Specification for Sintered Aluminum Structural Parts

    B596 Standard Specification for Gold-Copper Alloy Electrical Contact Material

    B598 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys

    B599 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip

    B608 Standard Specification for Welded Copper-Alloy Pipe

    B621 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

    B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

    B624 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application

    B634 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use

    B637 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

    B639 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service

    B640 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

    B643 Standard Specification for Copper-Beryllium Alloy Seamless Tube

    B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

    B650 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

    B654/B654M Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate

    B655/B655M Standard Specification for Niobium-Hafnium Alloy Bar and Wire

    B658/B658M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe

    B672 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire

    B684 Standard Specification for Platinum-Iridium Electrical Contact Materials

    B688 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

    B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

    B691 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire

    B694 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding

    B704 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes

    B706 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube

    B708 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip

    B709 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and Strip

    B718 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

    B719 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar

    B725 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe

    B729 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube

    B737 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire

    B740 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip

    B743 Standard Specification for Seamless Copper Tube in Coils

    B747 Standard Specification for Copper-Zirconium Alloy Sheet and Strip

    B749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

    B751 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube

    B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

    B755 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

    B756 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar

    B757 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

    B758 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

    B759 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube

    B766 Standard Specification for Electrodeposited Coatings of Cadmium

    B768 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

    B775 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

    B776 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate

    B777 Standard Specification for Tungsten Base, High-Density Metal

    B783 Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts

    B804 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe

    B805 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire

    B811 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding

    B815 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod

    B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems

    B823 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts

    B824 Standard Specification for General Requirements for Copper Alloy Castings

    B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

    B832 Standard Guide for Electroforming with Nickel and Copper

    B834 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts

    B837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems

    B846 Standard Terminology for Copper and Copper Alloys

    B848 Specification for Powder Forged (P/F) Ferrous Materials

    B853 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components

    B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe

    B863 Standard Specification for Titanium and Titanium Alloy Wire

    B865 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock

    B870 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)

    B872 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip

    B882 Specification for Pre-Patinated Copper for Architectural Applications

    B883 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials

    B888/B888M Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts

    B903 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement

    B906 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

    B919 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement

    B925 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens

    B927/B927M Standard Specification for Brass Rod, Bar, and Shapes

    B929 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

    B936 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar

    B937 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)

    B944 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

    B950 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys

    B956/B956M Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

    B967/B967M Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

    B969/B969M Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes

    B974/B974M Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire

    B981/B981M Standard Specification for Low Leaded Brass Rod, Bar and Shapes

    B983 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube

    B986 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application

    B988 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components

    C774 Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing

    C1187 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks

    C1671 Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging

    D1676 Standard Test Methods for Film-Insulated Magnet Wire

    D3353 Standard Test Methods for Fibrous-Insulated Magnet Wire

    D3552 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites

    D6456 Standard Specification for Finished Parts Made from Polyimide Resin

    D7147 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers

    E6 Standard Terminology Relating to Methods of Mechanical Testing

    E21 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

    E111 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

    E132 Standard Test Method for Poisson's Ratio at Room Temperature

    E139 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

    E143 Standard Test Method for Shear Modulus at Room Temperature

    E185 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels

    E290 Standard Test Methods for Bend Testing of Material for Ductility

    E292 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

    E328 Standard Test Methods for Stress Relaxation Tests for Materials and Structures

    E345 Standard Test Methods of Tension Testing of Metallic Foil

    E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

    E468 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials

    E488/E488M Standard Test Methods for Strength of Anchors in Concrete Elements

    E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

    E531 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials

    E606/E606M Standard Test Method for Strain-Controlled Fatigue Testing

    E646 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

    E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates

    E696 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire

    E740/E740M Standard Practice for Fracture Testing with Surface-Crack Tension Specimens

    E1012 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

    E1221 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels

    E1304 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials

    E1338 Guide for Identification of Metals and Alloys in Computerized Material Property Databases

    E1450 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

    E1681 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

    E1820 Standard Test Method for Measurement of Fracture Toughness

    E1856 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines

    E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

    E2207 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens

    E2208 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems

    E2215 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels

    E2218 Standard Test Method for Determining Forming Limit Curves

    E2472 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions

    E2634 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

    E2714 Standard Test Method for Creep-Fatigue Testing

    E2818 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds

    E2899 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending

    E2921 Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes and Rating Systems

    F15 Standard Specification for Iron-Nickel-Cobalt Sealing Alloy

    F67 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)

    F75 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)

    F90 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)

    F136 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)

    F138 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

    F139 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)

    F289 Standard Specification for Molybdenum Wire and Rod for Electronic Applications

    F384 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices

    F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

    F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments

    F543 Standard Specification and Test Methods for Metallic Medical Bone Screws

    F560 Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)

    F561 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

    F562 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)

    F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)

    F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

    F620 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition

    F621 Standard Specification for Stainless Steel Forgings for Surgical Implants

    F688 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)

    F799 Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)

    F855 Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment

    F961 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)

    F1043 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

    F1044 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

    F1058 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)

    F1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

    F1091 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)

    F1108 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)

    F1147 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings

    F1281 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

    F1282 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

    F1295 Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)

    F1314 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

    F1350 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)

    F1376 Standard Guide for Metallurgical Analysis for Gas Distribution System Components

    F1466 Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications

    F1472 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)

    F1537 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)

    F1586 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)

    F1624 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

    F1684 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications

    F1713 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)

    F1813 Standard Specification for Wrought Titanium–12 Molybdenum–6 Zirconium–2 Iron Alloy for Surgical Implant (UNS R58120)

    F1940 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

    F2063 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants

    F2066 Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)

    F2078 Standard Terminology Relating to Hydrogen Embrittlement Testing

    F2146 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)

    F2180 Standard Specification for Metallic Implantable Strands and Cables

    F2229 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)

    F2321 Standard Specification for Flexible and Rigid Insulated Temporary By-Pass Jumpers

    F2384 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)

    F2516 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials

    F2581 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)

    F2660 Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement

    F2855 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing

    F2885 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications

    F2886 Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications

    F2924 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion

    F2989 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications

    F3001 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion

    F3046 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)

    F3055 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion

    F3056 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion

    G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens

    G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments

    G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input

    G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

    G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution

    G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking

    G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method

    G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

    G143 Standard Test Method for Measurement of Web/Roller Friction Characteristics


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    A356/A356M Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

    A370 Test Methods and Definitions for Mechanical Testing of Steel Products

    B557 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

    B557M Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

    D1566 Terminology Relating to Rubber

    E4 Practices for Force Verification of Testing Machines

    E6 Terminology Relating to Methods of Mechanical Testing

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E83 Practice for Verification and Classification of Extensometer Systems

    E345 Test Methods of Tension Testing of Metallic Foil

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    E1012 Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

    E1856 Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines