ASTM E77 - 14 Standard Test Method for Inspection and Verification of Thermometers


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    B389 Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal

    C511 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

    C729 Standard Test Method for Density of Glass by the Sink-Float Comparator

    D5/D5M Standard Test Method for Penetration of Bituminous Materials

    D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    D113 Standard Test Method for Ductility of Bituminous Materials

    D402/D402M Standard Test Method for Distillation of Cutback Asphalt

    D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

    D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

    D1243 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

    D1525 Standard Test Method for Vicat Softening Temperature of Plastics

    D1747 Standard Test Method for Refractive Index of Viscous Materials

    D2170/D2170M Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

    D2171/D2171M Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

    D2386 Standard Test Method for Freezing Point of Aviation Fuels

    D2726/D2726M Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

    D3012 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

    D3143/D3143M Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

    D4493 Standard Test Method for Solidification Point of Bisphenol A (4,4`-Isopropylidenediphenol)

    D4693 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

    D4957 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer

    D5582 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator

    D5801 Standard Test Method for Toughness and Tenacity of Bituminous Materials

    D5853 Standard Test Method for Pour Point of Crude Oils

    D6007 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber

    D6084/D6084M Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

    D6648 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

    D6723 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

    D7175 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

    D7552 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer

    D7578 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

    D7776 Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories

    E1 Standard Specification for ASTM Liquid-in-Glass Thermometers

    E50 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

    E100 Standard Specification for ASTM Hydrometers

    E126 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers

    E207 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties

    E220 Standard Test Method for Calibration of Thermocouples By Comparison Techniques

    E344 Terminology Relating to Thermometry and Hydrometry

    E546 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units

    E576 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position

    E644 Standard Test Methods for Testing Industrial Resistance Thermometers

    E1333 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

    E2251 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids

    E2623 Standard Practice for Reporting Thermometer Calibrations

    E2995 Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E1 Specification for ASTM Liquid-in-Glass Thermometers

    E344 Terminology Relating to Thermometry and Hydrometry