ASTM E691 - 14 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A343/A343M Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

    A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

    A956 Standard Test Method for Leeb Hardness Testing of Steel Products

    A1038 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

    B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

    B212 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

    B214 Standard Test Method for Sieve Analysis of Metal Powders

    B311 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity

    B312 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders

    B330 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability

    B527 Standard Test Method for Determination of Tap Density of Metal Powders and Compounds

    B528 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens

    B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

    B557M Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

    B647 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

    B648 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

    B703 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter

    B761 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation

    B769 Standard Test Method for Shear Testing of Aluminum Alloys

    B795 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials

    B886 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

    B887 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

    B922 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption

    B923 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry

    B933 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials

    B934 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements

    B939 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials

    B946 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products

    B963 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B966 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas

    C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water

    C24 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials

    C25 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

    C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

    C165 Standard Test Method for Measuring Compressive Properties of Thermal Insulations

    C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C198 Standard Test Method for Cold Bonding Strength of Refractory Mortar

    C225 Standard Test Methods for Resistance of Glass Containers to Chemical Attack

    C302 Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation

    C372 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method

    C473 Standard Test Methods for Physical Testing of Gypsum Panel Products

    C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

    C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C522 Standard Test Method for Airflow Resistance of Acoustical Materials

    C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

    C651 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

    C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

    C686 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation

    C695 Standard Test Method for Compressive Strength of Carbon and Graphite

    C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

    C749 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite

    C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

    C800 Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)

    C830 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure

    C832 Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load

    C835 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C

    C958 Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation

    C978 Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures

    C1012/C1012M Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

    C1025 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite

    C1067 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials

    C1104/C1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

    C1108 Standard Test Method for Plutonium by Controlled-Potential Coulometry

    C1113/C1113M Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)

    C1134 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion

    C1171 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories

    C1182 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation

    C1203 Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel

    C1215 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry

    C1246 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

    C1259 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration

    C1271 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

    C1275 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature

    C1279 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass

    C1285 Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)

    C1291 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics

    C1292 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

    C1326 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics

    C1327 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics

    C1335 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation

    C1341 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

    C1365 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis

    C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

    C1374 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

    C1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

    C1419 Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus

    C1421 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature

    C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

    C1446 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories

    C1468 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature

    C1485 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source

    C1497 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation

    C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

    C1511 Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)

    C1512 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products

    C1549 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer

    C1559 Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)

    C1606 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware

    C1662 Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method

    C1663 Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test

    C1667 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels

    C1674 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures

    C1702 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

    C1708/C1708M Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

    C1720 Standard Test Method for Determining Liquidus Temperature of Immobilized Waste Glasses and Simulated Waste Glasses

    C1735 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

    C1763 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials

    C1773 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature

    C1774 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems

    D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)

    D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes

    D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

    D465 Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products

    D480 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes

    D494 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

    D542 Standard Test Method for Index of Refraction of Transparent Organic Plastics

    D545 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

    D635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

    D638 Standard Test Method for Tensile Properties of Plastics

    D638 Standard Test Method for Tensile Properties of Plastics

    D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

    D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids

    D695 Standard Test Method for Compressive Properties of Rigid Plastics

    D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

    D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D731 Standard Test Method for Molding Index of Thermosetting Molding Powder

    D732 Standard Test Method for Shear Strength of Plastics by Punch Tool

    D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

    D785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

    D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

    D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

    D822/D822M Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D850 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials

    D852 Standard Test Method for Solidification Point of Benzene

    D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

    D924 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

    D952 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

    D955 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

    D1000 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications

    D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

    D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

    D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

    D1037 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

    D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

    D1065 Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products

    D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve

    D1155 Standard Test Method for Roundness of Glass Spheres

    D1203 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods

    D1214 Standard Test Method for Sieve Analysis of Glass Spheres

    D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

    D1240 Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products

    D1316 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer

    D1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings

    D1343 Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method

    D1353 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

    D1414 Standard Test Methods for Rubber O-Rings

    D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

    D1494 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

    D1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

    D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique

    D1518 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate

    D1525 Standard Test Method for Vicat Softening Temperature of Plastics

    D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils

    D1585 Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products

    D1603 Standard Test Method for Carbon Black Content in Olefin Plastics

    D1621 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics

    D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

    D1667 Standard Specification for Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)

    D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

    D1708 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

    D1709 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

    D1725 Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method

    D1726 Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins

    D1746 Standard Test Method for Transparency of Plastic Sheeting

    D1790 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

    D1823 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

    D1824 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates

    D1875 Standard Test Method for Density of Adhesives in Fluid Form

    D1894 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

    D1921 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

    D1922 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

    D1938 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

    D1977 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis

    D1987 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters

    D1994 Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives

    D1998 Standard Specification for Polyethylene Upright Storage Tanks

    D2007 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method

    D2063/D2063M Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment

    D2065 : Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress

    D2066 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions

    D2067 Standard Test Method for Coarse Particles in Printing Ink Dispersions

    D2116 Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials

    D2166/D2166M Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

    D2305 Standard Test Methods for Polymeric Films Used for Electrical Insulation

    D2360 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography

    D2369 Standard Test Method for Volatile Content of Coatings

    D2412 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

    D2457 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

    D2463 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

    D2519 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

    D2538 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

    D2559 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

    D2565 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

    D2578 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films

    D2582 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

    D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

    D2584 Standard Test Method for Ignition Loss of Cured Reinforced Resins

    D2638 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

    D2658 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)

    D2765 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

    D2777 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water

    D2799 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal

    D2842 Standard Test Method for Water Absorption of Rigid Cellular Plastics

    D2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

    D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock

    D2862 Standard Test Method for Particle Size Distribution of Granular Activated Carbon

    D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

    D2866 Standard Test Method for Total Ash Content of Activated Carbon

    D2867 Standard Test Methods for Moisture in Activated Carbon

    D2868 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather

    D3012 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

    D3014 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

    D3032 Standard Test Methods for Hookup Wire Insulation

    D3079 Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products

    D3174 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal

    D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

    D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber

    D3288/D3288M Standard Test Methods for Magnet-Wire Enamels

    D3321 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants

    D3354 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method

    D3361/D3361M Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D3364 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

    D3368 Standard Specification for FEP-Fluorocarbon Sheet and Film

    D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

    D3403 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)

    D3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

    D3420 Standard Test Method for Pendulum Impact Resistance of Plastic Film

    D3467 Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon

    D3492 Standard Specification for Rubber Contraceptives (Male Condoms)

    D3574 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

    D3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

    D3576 Standard Test Method for Cell Size of Rigid Cellular Plastics

    D3591 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds

    D3663 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers

    D3670 Standard Guide for Determination of Precision and Bias of Methods of Committee D22

    D3682 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes

    D3749 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique

    D3760 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography

    D3763 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

    D3768 Standard Test Method for Microcellular Urethanes—Flexural Recovery

    D3769 Standard Test Method for Microcellular Urethanes--High Temperature Sag

    D3795 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer

    D3801 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

    D3803 Standard Test Method for Nuclear-Grade Activated Carbon

    D3826 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

    D3835 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

    D3846 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics

    D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

    D3906 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials

    D3907/D3907M Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

    D3908 Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method

    D3942 Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite

    D3953 Standard Specification for Strapping, Flat Steel and Seals

    D3963/D3963M Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

    D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

    D3975 Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments

    D3985 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor

    D4020 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

    D4049 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

    D4058 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

    D4061 Standard Test Method for Retroreflectance of Horizontal Coatings

    D4085 Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry

    D4093 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

    D4094 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers

    D4164 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers

    D4179 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers

    D4180 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers

    D4204 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study

    D4208 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method

    D4213 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss

    D4218 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique

    D4222 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements

    D4239 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

    D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

    D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

    D4272 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop

    D4273 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols

    D4274 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols

    D4275 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers By Gas Chromatography

    D4280 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

    D4284 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry

    D4301 Standard Test Method for Total Chlorine in Epoxy Resins and Compounds

    D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

    D4321 Standard Test Method for Package Yield of Plastic Film

    D4329 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

    D4350 Standard Test Method for Corrosivity Index of Plastics and Fillers

    D4361 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter

    D4365 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst

    D4383 Standard Specification for Plowable, Raised Retroreflective Pavement Markers

    D4438 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting

    D4440 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

    D4459 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

    D4463/D4463M Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts

    D4464 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering

    D4475 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

    D4476/D4476M Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods

    D4481 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts

    D4483 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

    D4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity

    D4492 Standard Test Method for Analysis of Benzene by Gas Chromatography

    D4493 Standard Test Method for Solidification Point of Bisphenol A (4,4`-Isopropylidenediphenol)

    D4497 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)

    D4498 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives

    D4499 Standard Test Method for Heat Stability of Hot-Melt Adhesives

    D4508 Standard Test Method for Chip Impact Strength of Plastics

    D4512 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder

    D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

    D4562 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen

    D4567 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

    D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

    D4590 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry

    D4603 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

    D4642 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry

    D4674 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

    D4678 Standard Practice for Rubber - Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials

    D4699 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

    D4713 Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems

    D4716/D4716M Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head

    D4735 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography

    D4754 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell

    D4780 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption

    D4781 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles

    D4782 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry

    D4796 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials

    D4797 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking

    D4804 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

    D4812 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics

    D4824 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption

    D4874 Standard Test Method for Leaching Solid Material in a Column Apparatus

    D4875 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols

    D4883 Standard Test Method for Density of Polyethylene by the Ultrasound Technique

    D4884/D4884M Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles

    D4890 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols

    D4891 Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion

    D4926 Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-ray Powder Diffraction

    D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

    D4968 Standard Guide for Annual Review of Test Methods and Specifications for Plastics

    D5017 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

    D5018 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

    D5031/D5031M Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings

    D5045 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

    D5048 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

    D5071 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

    D5074 Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures

    D5083 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

    D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

    D5117 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock

    D5132 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

    D5135 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography

    D5147/D5147M Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

    D5153 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption

    D5154 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

    D5155 Standard Test Methods for Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates

    D5158 Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving

    D5187 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction

    D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics

    D5208 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

    D5225 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

    D5227 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

    D5228 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon

    D5296 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

    D5306 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

    D5341 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)

    D5357 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction

    D5386 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

    D5399 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography

    D5403 Standard Test Methods for Volatile Content of Radiation Curable Materials

    D5419 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

    D5420 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

    D5422 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

    D5448/D5448M Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5449/D5449M Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5450/D5450M Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5458 Standard Test Method for Peel Cling of Stretch Wrap Film

    D5459 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film

    D5470 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials

    D5492 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics

    D5504 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

    D5508 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)

    D5528 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

    D5530 Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry

    D5572 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

    D5594 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)

    D5628 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

    D5629 Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers

    D5630 Standard Test Method for Ash Content in Plastics

    D5649 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners

    D5672 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique

    D5673 Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry

    D5742 Standard Test Method for Determination of Butane Activity of Activated Carbon

    D5744 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell

    D5748 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film

    D5751 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

    D5755 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading

    D5757 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets

    D5758 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction

    D5766/D5766M Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

    D5768 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

    D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

    D5795 Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via “Cobb Ring” Apparatus

    D5808 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D5824 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

    D5827 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography

    D5828 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates

    D5831 Standard Test Method for Screening Fuels in Soils

    D5836 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)

    D5866 Standard Test Method for Neps in Cotton Fibers

    D5867 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments

    D5885 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

    D5887 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

    D5890 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners

    D5891 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners

    D5917 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

    D5946 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements

    D5961/D5961M Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

    D5965 Standard Test Methods for Specific Gravity of Coating Powders

    D5968 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C

    D5974 Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography

    D5993 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners

    D5994 Standard Test Method for Measuring Core Thickness of Textured Geomembrane

    D6007 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber

    D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core

    D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

    D6038 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)

    D6042 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

    D6053 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

    D6056 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy

    D6057 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy

    D6059 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

    D6069 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D6090 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)

    D6099 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

    D6108 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

    D6109 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

    D6110 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

    D6111 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement

    D6113 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

    D6115 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites

    D6130 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

    D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage

    D6133 Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph

    D6142 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography

    D6143 Standard Test Method for Iron Content of Bisphenol A (4,4 - Isopropylidenediphenol)

    D6144 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography

    D6166 Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)

    D6175 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles

    D6195 Standard Test Methods for Loop Tack

    D6226 Standard Test Method for Open Cell Content of Rigid Cellular Plastics

    D6234 Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure

    D6241 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe

    D6258 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

    D6259 Standard Practice for Determination of a Pooled Limit of Quantitation

    D6266 Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

    D6267/D6267M Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures

    D6272 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

    D6281 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)

    D6289 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics

    D6290 Standard Test Method for Color Determination of Plastic Pellets

    D6299 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

    D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

    D6316 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke

    D6349 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry

    D6357 Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry

    D6360 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics

    D6387 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography

    D6414 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption

    D6419 Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks

    D6437 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)

    D6463/D6463M Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading

    D6474 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

    D6476 Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics

    D6478 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints

    D6479 Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints

    D6484/D6484M Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

    D6493 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus

    D6499 Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products

    D6526 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography

    D6531 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement

    D6558 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6559 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6563 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography

    D6566 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats

    D6567 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)

    D6576 Standard Specification for Flexible Cellular Rubber Chemically Blown

    D6580 Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings

    D6583 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption

    D6631 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method

    D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

    D6695 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

    D6721 Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry

    D6723 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

    D6738 Standard Test Method for Precipitated Silica - Volatile Content

    D6739 Standard Test Method for Silica - pH Value

    D6740 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition

    D6741 Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content

    D6743 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

    D6761 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

    D6762 Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings

    D6796 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies

    D6809 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials

    D6817/D6817M Standard Specification for Rigid Cellular Polystyrene Geofoam

    D6843 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)

    D6844 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)

    D6845 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area

    D6854 Standard Test Method for Silica-Oil Absorption Number

    D6855 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode

    D6857/D6857M Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method

    D6886 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography

    D6900 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

    D6902 Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings

    D6906 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence

    D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D6953 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

    D6979 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

    D6980 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight

    D7011 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

    D7028 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)

    D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

    D7049 Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres

    D7056 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams

    D7057 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)

    D7063/D7063M Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples

    D7065 Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert -Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry

    D7084 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers

    D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

    D7115 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

    D7133 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

    D7134 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)

    D7183 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

    D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D7191 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

    D7202 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection

    D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

    D7237 Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

    D7245 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating

    D7252 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates

    D7253 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols

    D7266 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)

    D7271 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer

    D7280 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

    D7284 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection

    D7305 Standard Test Method for Reflection Density of Printed Matter

    D7309 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

    D7313 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry

    D7315 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode

    D7330 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales

    D7348 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues

    D7370 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

    D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer

    D7426 Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

    D7427 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex

    D7430 Standard Practice for Mechanical Sampling of Coal

    D7439 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

    D7440 Standard Practice for Characterizing Uncertainty in Air Quality Measurements

    D7454 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus

    D7457 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D7458 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection

    D7466 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

    D7476 Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins

    D7477 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water

    D7487 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test

    D7488 Standard Test Method for Open Time of Latex Paints

    D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

    D7514 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

    D7515 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)

    D7520 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere

    D7535 Standard Test Method for Lead-210 in Water

    D7542 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime

    D7551 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence

    D7553 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

    D7559/D7559M Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions

    D7567 Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction

    D7570 Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering

    D7582 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis

    D7584 Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue to the Growth of Fungi in an Environmental Chamber

    D7591 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography

    D7635/D7635M Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

    D7637 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)

    D7639 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence

    D7661 Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms

    D7674 Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White

    D7681 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer

    D7682 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

    D7707 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust

    D7708 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks

    D7713 Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)

    D7716 Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography

    D7735 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures

    D7736 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol

    D7744/D7744M Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes

    D7748/D7748M Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products

    D7767 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them

    D7768 Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography

    D7778 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    D7779 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

    D7785 Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration

    D7786 Standard Test Method for Determining Enamel Holdout

    D7811 Standard Test Method for Bow and Skew Using a Measuring Tool

    D7816 Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins

    D7817 Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins

    D7818 Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins

    D7819 Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins

    D7830/D7830M Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge

    D7843 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry

    D7855/D7855M Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation

    D7862 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

    D7871 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)

    D7881 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode

    D7882 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode

    D7883 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography

    D7884 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography

    D7896 Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method

    E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

    E9 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

    E18 Standard Test Methods for Rockwell Hardness of Metallic Materials

    E21 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

    E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

    E28 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus

    E70 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode

    E96/E96M Standard Test Methods for Water Vapor Transmission of Materials

    E110 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers

    E112 Standard Test Methods for Determining Average Grain Size

    E119 Standard Test Methods for Fire Tests of Building Construction and Materials

    E159 Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)

    E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

    E194 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders

    E246 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry

    E247 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

    E248 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

    E278 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry

    E292 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

    E384 Standard Test Method for Knoop and Vickers Hardness of Materials

    E398 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement

    E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

    E430 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry

    E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

    E535 Standard Practice for Preparation of Fire-Test-Response Standards

    E537 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry

    E562 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

    E572 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E606/E606M Standard Test Method for Strain-Controlled Fatigue Testing

    E643 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material

    E646 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

    E698 Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method

    E766 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope

    E810 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry

    E811 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions

    E839 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable

    E855 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

    E948 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight

    E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

    E991 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method

    E1021 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices

    E1036 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells

    E1085 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry

    E1131 Standard Test Method for Compositional Analysis by Thermogravimetry

    E1135 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants

    E1251 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

    E1323 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data

    E1326 Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria

    E1352 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies

    E1353 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture

    E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

    E1356 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry

    E1362 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells

    E1367 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates

    E1414/E1414M Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

    E1488 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods

    E1508 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy

    E1545 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis

    E1569 Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique

    E1582 Standard Practice for Calibration of Temperature Scale for Thermogravimetry

    E1590 Standard Test Method for Fire Testing of Mattresses

    E1601 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

    E1613 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

    E1617 Standard Practice for Reporting Particle Size Characterization Data

    E1623 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)

    E1640 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis

    E1641 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method

    E1655 Standard Practices for Infrared Multivariate Quantitative Analysis

    E1706 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates

    E1710 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer

    E1771 Standard Test Method for Determination of Copper in Anode and Blister Copper

    E1782 Standard Test Method for Determining Vapor Pressure by Thermal Analysis

    E1792 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

    E1805 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry

    E1834 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry

    E1856 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines

    E1858 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry

    E1860 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers

    E1868 Standard Test Method for Loss-On-Drying by Thermogravimetry

    E1875 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

    E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

    E1970 Standard Practice for Statistical Treatment of Thermoanalytical Data

    E2008 Standard Test Methods for Volatility Rate by Thermogravimetry

    E2009 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry

    E2040 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers

    E2056 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures

    E2171 Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record

    E2177 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness

    E2187 Standard Test Method for Measuring the Ignition Strength of Cigarettes

    E2242 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure

    E2248 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens

    E2269 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography

    E2274 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants

    E2283 Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features

    E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials

    E2301 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry

    E2335 Standard Guide for Laboratory Monitors

    E2399 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems

    E2406 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations

    E2427 Standard Test Method for Acceptance by Performance Testing for Sieves

    E2448 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

    E2455 Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels

    E2480 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands

    E2489 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

    E2490 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)

    E2536 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests

    E2550 Standard Test Method for Thermal Stability by Thermogravimetry

    E2551 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers

    E2584 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter

    E2591 Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians

    E2627 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials

    E2649 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

    E2653 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories

    E2655 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods

    E2677 Standard Test Method for Determining Limits of Detection in Explosive Trace Detectors

    E2694 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

    E2714 Standard Test Method for Creep-Fatigue Testing

    E2783 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure

    E2792 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion

    E2823 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)

    E2832 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)

    E2864 Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption

    E2890 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method

    E2916 Standard Terminology for Digital and Multimedia Evidence Examination

    E2931 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds

    E2945 Standard Test Method for Film Permeability Determination Using Static Permeability Cells

    F36 Standard Test Method for Compressibility and Recovery of Gasket Materials

    F37 Standard Test Methods for Sealability of Gasket Materials

    F88/F88M Standard Test Method for Seal Strength of Flexible Barrier Materials

    F137 Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

    F146 Standard Test Methods for Fluid Resistance of Gasket Materials

    F152 Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials

    F218 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass

    F355 Standard Test Method for Impact Attenuation of Playing Surface Systems and Materials

    F373 Standard Test Method for Embossed Depth of Resilient Floor Coverings

    F386 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

    F387 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

    F410 Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement

    F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments

    F558 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners

    F608 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners

    F609 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)

    F739 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact

    F756 Standard Practice for Assessment of Hemolytic Properties of Materials

    F791 Standard Test Method for Stress Crazing of Transparent Plastics

    F801 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts

    F820 Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems

    F904 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials

    F970 Standard Test Method for Static Load Limit

    F1165 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts

    F1249 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor

    F1264 Standard Specification and Test Methods for Intramedullary Fixation Devices

    F1276 Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials

    F1277 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique

    F1284 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems

    F1291 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin

    F1292 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment

    F1304 Standard Test Method for Deflection of Resilient Floor Tile

    F1306 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

    F1307 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor

    F1315 Standard Test Method for Density of a Sheet Gasket Material

    F1317 Standard Test Method for Calibration of Microwave Ovens

    F1326 Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners

    F1334 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners

    F1362 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials

    F1383 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact

    F1405 Standard Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products—Atlantek Method

    F1438 Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components

    F1514 Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change

    F1515 Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change

    F1520 Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges

    F1536 Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape

    F1593 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer

    F1608 Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)

    F1632 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes

    F1647 Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes

    F1702 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus

    F1710 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer

    F1717 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

    F1819 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique

    F1863 Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts

    F1868 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate

    F1884 Standard Test Method for Determining Residual Solvents in Packaging Materials

    F1888 Standard Test Method for Compression-Displacement of Baseballs and Softballs

    F1914 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering

    F1921/F1921M Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs

    F1926/F1926M Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings

    F1927 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector

    F1930 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin

    F1940 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

    F1951 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment

    F1976 Standard Test Method for Impact Attenuation of Athletic Shoe Cushioning Systems and Materials

    F1978 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

    F2013 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector

    F2054/F2054M Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates

    F2082 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery

    F2095 Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates

    F2102 Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants

    F2105 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems

    F2129 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

    F2132 Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps

    F2136 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe

    F2150 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products

    F2156 Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope

    F2157 Standard Specification for Synthetic Surfaced Running Tracks

    F2192 Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders

    F2199 Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat

    F2203 Standard Test Method for Linear Measurement Using Precision Steel Rule

    F2214 Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)

    F2251 Standard Test Method for Thickness Measurement of Flexible Packaging Material

    F2263 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water

    F2299/F2299M Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres

    F2338 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method

    F2370 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin

    F2381 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy

    F2385 Standard Test Method for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs

    F2391 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas

    F2405 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer

    F2459 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis

    F2466 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications

    F2476 Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2TR) Through Barrier Materials Using An Infrared Detector

    F2508 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces

    F2516 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials

    F2544 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units

    F2569 Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use

    F2607 Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners

    F2625 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

    F2634 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

    F2638 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier

    F2778 Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)

    F2797 Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners

    F2824 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids

    F2826 Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units

    F2828 Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System

    F2837 Standard Test Method for Hot Compression Properties of Gasket Materials

    F2845 Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs

    F2853 Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams

    F2883 Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications

    F2894 Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven

    F2961 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter

    F2980 Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)

    F3004 Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound

    F3022 Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments

    F3030 Standard Test Method for Snowboards with a Channel-Mounting System and Removable Inserts

    G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data

    G32 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus

    G48 : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

    G51 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing

    G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys

    G72/G72M Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment

    G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test

    G81 Standard Test Method for Jaw Crusher Gouging Abrasion Test

    G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments

    G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests

    G122 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents

    G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution

    G132 Standard Test Method for Pin Abrasion Testing

    G134 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet

    G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method

    G141 Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials

    G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

    G143 Standard Test Method for Measurement of Web/Roller Friction Characteristics

    G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels

    G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

    G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

    G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

    G154 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

    G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

    G156 Standard Practice for Selecting and Characterizing Weathering Reference Materials

    G174 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact

    G176 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method

    G180 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries

    G181 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions

    G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method

    G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique

    G200 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil

    G202 Standard Test Method for Using Atmospheric Pressure Rotating Cage


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods

    E456 Terminology Relating to Quality and Statistics

    E1169 Practice for Conducting Ruggedness Tests

    E1402 Guide for Sampling Design

    E2282 Guide for Defining the Test Result of a Test Method