A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe

A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

A931 Standard Test Method for Tension Testing of Wire Ropes and Strand

A938 Standard Test Method for Torsion Testing of Wire

A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

B557M Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]

B565 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods

B598 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys

B647 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

B648 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

B769 Standard Test Method for Shear Testing of Aluminum Alloys

B820 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip

B831 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products

B950 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys

C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

C140 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

C273/C273M Standard Test Method for Shear Properties of Sandwich Core Materials

C297/C297M Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

C301 Standard Test Methods for Vitrified Clay Pipe

C363/C363M Standard Test Method for Node Tensile Strength of Honeycomb Core Materials

C364/C364M Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions

C365/C365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores

C393/C393M Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

C469/C469M Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression

C480/C480M Standard Test Method for Flexure Creep of Sandwich Constructions

C565 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

C749 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite

C773 Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials

C1187 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks

C1239 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics

C1259 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration

C1273 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures

C1275 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature

C1291 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics

C1292 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

C1323 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature

C1337 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures

C1341 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

C1358 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures

C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures

C1360 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

C1361 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures

C1366 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures

C1368 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature

C1424 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature

C1425 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures

C1465 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures

C1468 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature

C1469 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

C1499 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature

C1525 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching

C1557 Standard Test Method for Tensile Strength and Young's Modulus of Fibers

C1576 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature

C1674 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures

C1683 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics

D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes

D907 Standard Terminology of Adhesives

D953 Standard Test Method for Bearing Strength of Plastics

D1566 Standard Terminology Relating to Rubber

D1676 Standard Test Methods for Film-Insulated Magnet Wire

D2095 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

D2343 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

D2344/D2344M Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

D2442 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications

D2559 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

D3039/D3039M Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

D3410/D3410M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading

D3479/D3479M Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials

D3518/D3518M Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate

D3930 Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes

D3983 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

D4092 Standard Terminology for Plastics: Dynamic Mechanical Properties

D4255/D4255M Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

D4761 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material

D4896 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results

D5262 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics

D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

D5448/D5448M Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

D5449/D5449M Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

D5450/D5450M Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

D5467/D5467M Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam

D5528 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

D5572 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

D5592 Standard Guide for Material Properties Needed in Engineering Design Using Plastics

D5751 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

D5766/D5766M Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

D5824 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

D5961/D5961M Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

D6115 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites

D6264/D6264M Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force

D6415/D6415M Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

D6416/D6416M Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load

D6484/D6484M Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

D6641/D6641M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

D6671/D6671M Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites

D6742/D6742M Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates

D6815 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products

D6856/D6856M Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials

D6873/D6873M Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates

D7078/D7078M Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

D7136/D7136M Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

D7137/D7137M Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

D7205/D7205M Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars

D7248/D7248M Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens

D7249/D7249M Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure

D7250/D7250M Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness

D7264/D7264M Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials

D7290 Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications

D7291/D7291M Standard Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

D7332/D7332M Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

D7336/D7336M Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials

D7469 Standard Test Methods for End-Joints in Structural Wood Products

D7522/D7522M Standard Test Method for Pull-Off Strength for FRP Bonded to Concrete Substrate

D7565/D7565M Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures

D7615/D7615M Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates

D7616/D7616M Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures

D7617/D7617M Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars

D7766/D7766M Standard Practice for Damage Resistance Testing of Sandwich Constructions

E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

E9 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

E21 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

E83 Standard Practice for Verification and Classification of Extensometer Systems

E111 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

E132 Standard Test Method for Poisson's Ratio at Room Temperature

E139 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

E143 Standard Test Method for Shear Modulus at Room Temperature

E190 Standard Test Method for Guided Bend Test for Ductility of Welds

E238 Standard Test Method for Pin-Type Bearing Test of Metallic Materials

E290 Standard Test Methods for Bend Testing of Material for Ductility

E292 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

E345 Standard Test Methods of Tension Testing of Metallic Foil

E467 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System

E468 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials

E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

E646 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates

E754 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints

E855 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

E1012 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

E1309 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases

E1319 Standard Guide for High-Temperature Static Strain Measurement

E1426 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress

E1434 Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases

E1450 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

E1561 Standard Practice for Analysis of Strain Gage Rosette Data

E1685 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique

E1823 Standard Terminology Relating to Fatigue and Fracture Testing

E1875 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

E1876 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration

E1922 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials

E1928 Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing

E2207 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens

E2218 Standard Test Method for Determining Forming Limit Curves

E2448 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

E2624 Standard Practice for Torque Calibration of Testing Machines and Devices

F19 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals

F543 Standard Specification and Test Methods for Metallic Medical Bone Screws

F1044 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

F1147 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings

F1160 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings

F1582 Standard Terminology Relating to Spinal Implants

F1624 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

F1717 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

F2077 Test Methods For Intervertebral Body Fusion Devices

F2078 Standard Terminology Relating to Hydrogen Embrittlement Testing

F2193 Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System

F2346 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs

F2502 Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants

F2516 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials

F2706 Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model

F2789 Standard Guide for Mechanical and Functional Characterization of Nucleus Devices

F2790 Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses

F2842 Standard Specification for Reins Used in Thoroughbred and Quarter Horse Racing

G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking