ASTM E527 - 12 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A176 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

    A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

    A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

    A269/A269M Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

    A270/A270M Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing

    A276 Standard Specification for Stainless Steel Bars and Shapes

    A304 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

    A311/A311M Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements

    A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

    A313/A313M Standard Specification for Stainless Steel Spring Wire

    A314 Standard Specification for Stainless Steel Billets and Bars for Forging

    A322 Standard Specification for Steel Bars, Alloy, Standard Grades

    A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

    A358/A358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

    A409/A409M Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

    A473 Standard Specification for Stainless Steel Forgings

    A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A565/A565M Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

    A576 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

    A580/A580M Standard Specification for Stainless Steel Wire

    A581/A581M Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods

    A582/A582M Standard Specification for Free-Machining Stainless Steel Bars

    A632 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

    A638/A638M Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

    A659/A659M Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

    A681 Standard Specification for Tool Steels Alloy

    A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A688/A688M Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes

    A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings

    A713 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

    A753 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

    A774/A774M Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

    A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

    A789/A789M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

    A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

    A794/A794M Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

    A813/A813M Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

    A814/A814M Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

    A837/A837M Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

    A895 Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

    A943/A943M Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

    A949/A949M Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

    A959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

    A968/A968M Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service

    A1010/A1010M Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

    A1053/A1053M Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe

    A1055/A1055M Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

    B5 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes

    B6 Standard Specification for Zinc

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B22/B22M Standard Specification for Bronze Castings for Bridges and Turntables

    B26/B26M Standard Specification for Aluminum-Alloy Sand Castings

    B42 Standard Specification for Seamless Copper Pipe, Standard Sizes

    B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

    B61 Standard Specification for Steam or Valve Bronze Castings

    B62 Standard Specification for Composition Bronze or Ounce Metal Castings

    B66 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts

    B67 Standard Specification for Car and Tender Journal Bearings, Lined

    B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed

    B69 Standard Specification for Rolled Zinc

    B75/B75M Standard Specification for Seamless Copper Tube

    B80 Standard Specification for Magnesium-Alloy Sand Castings

    B85/B85M Standard Specification for Aluminum-Alloy Die Castings

    B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

    B88 Standard Specification for Seamless Copper Water Tube

    B88M Standard Specification for Seamless Copper Water Tube [Metric]

    B93/B93M Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings

    B94 Standard Specification for Magnesium-Alloy Die Castings

    B103/B103M Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

    B105 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors

    B107/B107M Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire

    B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings

    B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

    B121/B121M Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

    B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

    B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets

    B135 Standard Specification for Seamless Brass Tube

    B135M Standard Specification for Seamless Brass Tube [Metric]

    B148 Standard Specification for Aluminum-Bronze Sand Castings

    B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B166 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,

    B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an

    B168 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,

    B170 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

    B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

    B176 Standard Specification for Copper-Alloy Die Castings

    B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes

    B187/B187M Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

    B188 Standard Specification for Seamless Copper Bus Pipe and Tube

    B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B197/B197M Standard Specification for Copper-Beryllium Alloy Wire

    B199 Standard Specification for Magnesium-Alloy Permanent Mold Castings

    B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

    B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

    B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

    B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)

    B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

    B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)

    B216 Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes

    B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

    B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)

    B224 Standard Classification of Coppers

    B230/B230M Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes

    B231/B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

    B232/B232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

    B233 Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes

    B234M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]

    B234 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

    B236M Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]

    B236 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

    B240 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings

    B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

    B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

    B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

    B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

    B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

    B253 Standard Guide for Preparation of Aluminum Alloys for Electroplating

    B275 Standard Practice for Codification of Certain Zinc, Tin and Lead Die Castings

    B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

    B306 Standard Specification for Copper Drainage Tube (DWV)

    B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

    B313/B313M Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes

    B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

    B317/B317M Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)

    B324 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes

    B327 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys

    B345/B345M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems

    B369 Standard Specification for Copper-Nickel Alloy Castings

    B373 Standard Specification for Aluminum Foil for Capacitors

    B398/B398M Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes

    B399/B399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors

    B400/B400M Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

    B401 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)

    B403 Standard Specification for Magnesium-Alloy Investment Castings

    B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

    B422/B422M Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

    B427 Standard Specification for Gear Bronze Alloy Castings

    B429/B429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

    B435 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

    B440 Standard Specification for Cadmium

    B447 Standard Specification for Welded Copper Tube

    B462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,

    B465 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications

    B491/B491M Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications

    B505/B505M Standard Specification for Copper Alloy Continuous Castings

    B524/B524M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)

    B534 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B543/B543M Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

    B547/B547M Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

    B572 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

    B574 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten

    B575 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium

    B584 Standard Specification for Copper Alloy Sand Castings for General Applications

    B587 Standard Specification for Welded Brass Tube

    B591 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar

    B592 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B609/B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

    B618/B618M Standard Specification for Aluminum-Alloy Investment Castings

    B619 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

    B621 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

    B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

    B625 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip

    B626 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

    B632/B632M Standard Specification for Aluminum-Alloy Rolled Tread Plate

    B640 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

    B643 Standard Specification for Copper-Beryllium Alloy Seamless Tube

    B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

    B661 Standard Practice for Heat Treatment of Magnesium Alloys

    B673 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

    B674 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube

    B677 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

    B686/B686M Standard Specification for Aluminum Alloy Castings, High-Strength

    B698 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

    B701/B701M Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)

    B711 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)

    B736 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock

    B750 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings

    B755 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

    B756 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar

    B757 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

    B758 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

    B763/B763M Standard Specification for Copper Alloy Sand Castings for Valve Applications

    B768 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

    B770 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications

    B778 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)

    B779 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)

    B786/B786M Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation

    B792 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting

    B793 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds

    B800 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers

    B806 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications

    B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems

    B833 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel

    B836 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection

    B852 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel

    B856 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)

    B857 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)

    B860 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing

    B870 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)

    B888/B888M Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts

    B892 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings

    B894 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings

    B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B907 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders

    B908 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot

    B914 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel

    B928/B928M Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments

    B950 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys

    B951 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought

    B955/B955M Standard Specification for Aluminum-Alloy Centrifugal Castings

    B956/B956M Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

    B960 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc

    B969/B969M Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes

    B983 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube

    D5704 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

    E1338 Guide for Identification of Metals and Alloys in Computerized Material Property Databases

    F68 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices

    F1472 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)

    G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input

    G118 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    There are currently no reference documents for this standard.