ASTM E473 - 11a Standard Terminology Relating to Thermal Analysis and Rheology


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C1470 Standard Guide for Testing the Thermal Properties of Advanced Ceramics

    D1519 Standard Test Method for Rubber Chemicals-Melting Range

    D3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

    D3850 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)

    D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

    D4419 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

    D4591 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

    D5028 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

    D5483 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

    D5885 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

    D6370 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)

    D6382/D6382M Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material

    D6604 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry

    D7426 Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

    E228 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer

    E289 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry

    E487 Standard Test Method for Constant-Temperature Stability of Chemical Materials

    E537 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry

    E698 Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method

    E793 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry

    E794 Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis

    E831 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

    E928 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry

    E967 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers

    E968 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters

    E1131 Standard Test Method for Compositional Analysis by Thermogravimetry

    E1231 Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials

    E1269 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry

    E1356 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry

    E1363 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers

    E1545 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis

    E1582 Standard Practice for Calibration of Temperature Scale for Thermogravimetry

    E1641 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method

    E1782 Standard Test Method for Determining Vapor Pressure by Thermal Analysis

    E1824 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method

    E1858 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry

    E1860 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers

    E1867 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers

    E1868 Standard Test Method for Loss-On-Drying by Thermogravimetry

    E1952 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry

    E1953 Standard Practice for Description of Thermal Analysis and Rheology Apparatus

    E2008 Standard Test Method for Volatility Rate by Thermogravimetry

    E2009 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry

    E2040 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers

    E2041 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method

    E2043 Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry

    E2046 Standard Test Method for Reaction Induction Time by Thermal Analysis

    E2069 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters

    E2070 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods

    E2092 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis

    E2105 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)

    E2113 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers

    E2160 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry

    E2206 Standard Test Method for Force Calibration of Thermomechanical Analyzers

    E2253 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters

    E2254 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers

    E2347 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis

    E2402 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

    E2403 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry

    E2425 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers

    E2509 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode

    E2510 Standard Test Method for Torque Calibration or Conformance of Rheometers

    E2550 Standard Test Method for Thermal Stability by Thermogravimetry

    E2551 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers

    E2602 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry

    E2603 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters

    E2716 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry

    E2744 Standard Test Method for Pressure Calibration of Thermal Analyzers

    E2781 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis

    F1925 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants

    F2004 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis

    F2005 Standard Terminology for Nickel-Titanium Shape Memory Alloys

    F2150 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products

    F2313 Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E1445 Terminology Relating to Hazard Potential of Chemicals