ASTM E344 - 13 Terminology Relating to Thermometry and Hydrometry


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D909 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline

    D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

    D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

    D4611 Standard Test Method for Specific Heat of Rock and Soil

    D6026 Standard Practice for Using Significant Digits in Geotechnical Data

    D6176 Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors

    D6838 Standard Test Method for Cummins M11 High Soot Test

    D6922 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

    D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

    D6975 Standard Test Method for Cummins M11 EGR Test

    D6987/D6987M Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

    D7583 Standard Test Method for John Deere Coolant Cavitation Test

    E1 Standard Specification for ASTM Liquid-in-Glass Thermometers

    E77 Standard Test Method for Inspection and Verification of Thermometers

    E100 Standard Specification for ASTM Hydrometers

    E126 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers

    E207 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties

    E220 Standard Test Method for Calibration of Thermocouples By Comparison Techniques

    E235/E235M Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications

    E452 Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer

    E563 Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature

    E574 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation

    E585/E585M Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable

    E601 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air

    E608/E608M Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples

    E631 Standard Terminology of Building Constructions

    E633 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air

    E644 Standard Test Methods for Testing Industrial Resistance Thermometers

    E667 Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers

    E696 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire

    E780 Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Thermocouple Cable at Room Temperature

    E825 Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature

    E839 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable

    E879 Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements

    E1061 Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers

    E1104 Standard Specification for Clinical Thermometer Probe Covers and Sheaths

    E1112 Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature

    E1129/E1129M Standard Specification for Thermocouple Connectors

    E1137/E1137M Standard Specification for Industrial Platinum Resistance Thermometers

    E1142 Standard Terminology Relating to Thermophysical Properties

    E1159 Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum

    E1299 Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature

    E1350 Standard Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service

    E1480 Standard Terminology of Facility Management (Building-Related)

    E1502 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures

    E1594 Standard Guide for Expression of Temperature

    E1605 Standard Terminology Relating to Lead in Buildings

    E1652 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Base Metal Thermocouples, Metal-Sheathed Platinum Resistance Thermometers, and Noble Metal Thermocouples

    E1684 Standard Specification for Miniature Thermocouple Connectors

    E1750 Standard Guide for Use of Water Triple Point Cells

    E1751/E1751M Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations

    E1965 Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature

    E2120 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films

    E2181/E2181M Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable

    E2251 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids

    E2488 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison

    E2593 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers

    E2623 Standard Practice for Reporting Thermometer Calibrations

    E2730 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits

    E2820 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors

    E2821 Standard Specification for ?Compacted Mineral-Insulated, Metal-Sheathed Cable Used in Industrial Resistance Thermometers

    E2846 Standard Guide for Thermocouple Verification

    E2847 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers

    E2877 Standard Guide for Digital Contact Thermometers

    F2362 Standard Specification for Temperature Monitoring Equipment


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E1 Specification for ASTM Liquid-in-Glass Thermometers

    E77 Test Method for Inspection and Verification of Thermometers

    E100 Specification for ASTM Hydrometers

    E126 Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers

    E207 Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties

    E220 Test Method for Calibration of Thermocouples By Comparison Techniques

    E230 Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples

    E452 Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer

    E574 Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation

    E585/E585M Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable

    E601 Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air

    E608/E608M Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples

    E644 Test Methods for Testing Industrial Resistance Thermometers

    E667 Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers

    E696 Specification for Tungsten-Rhenium Alloy Thermocouple Wire

    E710 Test Method for Comparing EMF Stabilities of Base-Metal Thermoelements in Air Using Dual, Simultaneous, Thermal-EMF Indicators

    E780 Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Thermocouple Cable at Room Temperature

    E825 Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature

    E839 Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable

    E879 Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements

    E1061 Specification for Direct-Reading Liquid Crystal Forehead Thermometers

    E1104 Specification for Clinical Thermometer Probe Covers and Sheaths

    E1112 Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature

    E1129/E1129M Specification for Thermocouple Connectors

    E1137/E1137M Specification for Industrial Platinum Resistance Thermometers

    E1159 Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum

    E1256 Test Methods for Radiation Thermometers (Single Waveband Type)

    E1299 Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature

    E1350 Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service

    E1502 Guide for Use of Fixed-Point Cells for Reference Temperatures

    E1594 Guide for Expression of Temperature

    E1684 Specification for Miniature Thermocouple Connectors

    E1750 Guide for Use of Water Triple Point Cells

    E1751 Guide for Temperature Electromotive Force (EMF) Tables for Non-Letter Designated Thermocouple Combinations

    E1965 Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature

    E2181/E2181M Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable

    E2251 Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids

    E2593 Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers