ASTM E337 - 02(2007) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C11 Standard Terminology Relating to Gypsum and Related Building Materials and Systems

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

    C870 Standard Practice for Conditioning of Thermal Insulating Materials

    C1161 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature

    C1273 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures

    C1275 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature

    C1292 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

    C1323 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature

    C1337 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures

    C1341 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

    C1358 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures

    C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures

    C1360 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

    C1361 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures

    C1366 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures

    C1368 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature

    C1421 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature

    C1424 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature

    C1425 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures

    C1465 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures

    C1468 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature

    C1469 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

    C1498 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials

    C1499 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature

    C1576 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature

    C1674 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures

    C1684 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength

    C1699 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates

    C1773 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature

    D584 Standard Test Method for Wool Content of Raw Wool-Laboratory Scale

    D1610 Standard Practice for Conditioning Leather and Leather Products for Testing

    D1776 Standard Practice for Conditioning and Testing Textiles

    D2724 Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics

    D3154 Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)

    D3195/D3195M Standard Practice for Rotameter Calibration

    D3267 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)

    D3924 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials

    D4332 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing

    D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

    D5438 Standard Practice for Collection of Floor Dust for Chemical Analysis

    D5498 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities

    D5527 Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means

    D5582 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator

    D6007 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber

    D6333 Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors

    D7295 Standard Practice for Sampling and Determination of Hydrogen Cyanide (HCN) in Combustion Effluents and Other Stationary Sources

    D7434 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads

    D7435 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers

    D7580/D7580M Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads

    D7779 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

    E41 Terminology Relating to Conditioning

    E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

    E606/E606M Standard Test Method for Strain-Controlled Fatigue Testing

    E1333 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

    E2368 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing

    F555 Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner

    F884 Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner

    F922 Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle

    F1038 Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator

    F1601 Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems

    F1692 Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems

    F1980 Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices

    F2016 Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings

    F2825 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D861 Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns

    D1193 Specification for Reagent Water

    D1356 Terminology Relating to Sampling and Analysis of Atmospheres

    D1357 Practice for Planning the Sampling of the Ambient Atmosphere

    D3631 Test Methods for Measuring Surface Atmospheric Pressure

    D4023 Terminology Relating to Humidity Measurements

    D4230 Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer

    E1 Specification for ASTM Liquid-in-Glass Thermometers