ASTM E300 - 03(2009) Standard Practice for Sampling Industrial Chemicals


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

    D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

    D235 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

    D268 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

    D304 Standard Specification for n-Butyl Alcohol (Butanol)

    D329 Standard Specification for Acetone

    D330 Standard Specification for 2-Butoxyethanol

    D331 Standard Specification for 2-Ethoxyethanol

    D365 Standard Guide for Soluble Nitrocellulose Base Solutions

    D608 Standard Specification for Dibutyl Phthalate

    D740 Standard Specification for Methyl Ethyl Ketone

    D770 Standard Specification for Isopropyl Alcohol

    D801 Standard Test Methods for Sampling and Testing Dipentene

    D802 Standard Test Methods for Sampling and Testing Pine Oils

    D803 Standard Test Methods for Testing Tall Oil

    D1007 Standard Specification for sec-Butyl Alcohol

    D1152 Standard Specification for Methanol (Methyl Alcohol)

    D1153 Standard Specification for Methyl Isobutyl Ketone1, 2

    D1718 Standard Specification for Isobutyl Acetate (95% Grade)

    D1719 Standard Specification for Isobutyl Alcoholl

    D1817 Standard Test Method for Rubber Chemicals—Density

    D1836 Standard Specification for Commercial Hexanes

    D1969 Standard Specification for 2-Ethylhexanol

    D2190 Standard Specification for Vinyl Acetate

    D2373 Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method

    D2374 Standard Test Method for Lead in Paint Driers by EDTA Method

    D2375 Standard Test Method for Manganese in Paint Driers by EDTA Method

    D2378 Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited

    D2613 Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method

    D2627 Standard Specification for Diacetone Alcohol

    D2634 Standard Specification for Methyl Amyl Acetate (95?% Grade)

    D2635 Standard Specification for Methyl Isobutyl Carbinol

    D2636 Standard Specification for Hexylene Glycol

    D2693 Standard Specification for Ethylene Glycol

    D2694 Standard Specification for Diethylene Glycol

    D2854 Standard Test Method for Apparent Density of Activated Carbon

    D2862 Standard Test Method for Particle Size Distribution of Granular Activated Carbon

    D2916 Standard Specification for Isophorone

    D2917 Standard Specification for Methyl Isoamyl Ketone

    D3128 Standard Specification for 2-Methoxyethanol

    D3130 Standard Specification for n-Propyl Acetate (96 % Grade)

    D3131 Standard Specification for Isopropyl Acetate (99?% Grade)

    D3143/D3143M Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

    D3437 Standard Practice for Sampling and Handling Liquid Cyclic Products

    D3438 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride

    D3466 Standard Test Method for Ignition Temperature of Granular Activated Carbon

    D3467 Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon

    D3540 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)

    D3548 Standard Specification for Ethyl Acrylate

    D3620 Standard Specification for Glacial Acetic Acid

    D3622 Standard Specification for 1-Propanol (n-Propyl Alcohol)

    D3636 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials

    D3728 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)

    D3734 Standard Specification for High-Flash Aromatic Naphthas

    D3735 Standard Specification for VM&P Naphthas

    D3802 Standard Test Method for Ball-Pan Hardness of Activated Carbon

    D3803 Standard Test Method for Nuclear-Grade Activated Carbon

    D3804 Standard Test Method for Iron in Paint Driers by EDTA Method

    D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

    D3838 Standard Test Method for pH of Activated Carbon

    D3852 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid

    D3860 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique

    D3969 Standard Test Method for Zirconium in Paint Driers by EDTA Method

    D3970 Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination

    D3988 Standard Test Method for Vanadium in Paint Driers by EDTA Method

    D3989 Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method

    D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

    D4069 Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams

    D4075 Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals

    D4171 Standard Specification for Fuel System Icing Inhibitors

    D4359 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid

    D4360 Standard Specification for Methyl n-Amyl Ketone

    D4367 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography

    D4416 Standard Specification for Acrylic Acid

    D4607 Standard Test Method for Determination of Iodine Number of Activated Carbon

    D4614 Standard Specification for Ethyl Acetate (All Grades)

    D4615 Standard Specification for n-Butyl Acetate (All Grades)

    D4701 Standard Specification for Technical Grade Methylene Chloride

    D4709 Standard Specification for Methyl Acrylate

    D4710 Standard Specification for Acetaldehyde

    D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

    D4835 Standard Specification for Propylene Glycol Monomethyl Ether Acetate

    D4836 Standard Specification for Dipropylene Glycol Monomethyl Ether

    D4837 Standard Specification for Propylene Glycol Monomethyl Ether

    D5029 Standard Test Method for Water Solubles in Activated Carbon

    D5137 Standard Specification for Hexyl Acetate

    D5158 Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving

    D5159 Standard Guide for Dusting Attrition of Granular Activated Carbon

    D5160 Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon

    D5164 Standard Specification for Propylene Glycol and Dipropylene Glycol

    D5228 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon

    D5680 Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers

    D5742 Standard Test Method for Determination of Butane Activity of Activated Carbon

    D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

    D6229 Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

    D6232 Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities

    D6385 Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing

    D6450 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

    D6646 Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon

    D6647 Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption

    D6793 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

    D6851 Standard Test Method for Determination of Contact pH with Activated Carbon

    D7090 Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography

    D7094 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

    D7236 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

    D7385 Standard Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion

    D7388 Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)

    D7515 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)

    D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

    D7640 Standard Specification for Engine Coolant Grade Glycerin

    D7713 Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)

    D7862 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

    E346 Standard Test Method for Analysis of Methanol

    E359 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)

    E411 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine

    E755 Standard Test Method for Dicumyl Peroxide, Assay (Liquid Chromatography)

    E1090 Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins

    E1119 Standard Specification for Industrial Grade Ethylene Glycol

    E1146 Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)

    E1177 Standard Specification for Engine Coolant Grade Glycol

    E1456 Standard Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid)

    E1506 Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar)

    E1547 Standard Terminology Relating to Industrial and Specialty Chemicals

    E1568 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

    E1584 Standard Test Method for Assay of Nitric Acid

    E1899 Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide

    E2313 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)

    E2409 Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method)

    E2469 Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography

    E2470 Standard Specification for Polyester Grade Ethylene Glycol

    E2680 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)

    G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D270 Method of Sampling Petroleum and Petroleum Products Withdrawn. The last approved version of this historical standard is referenced on www.astm.org.

    D2234/D2234M Practice for Collection of a Gross Sample of Coal

    E180 Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals