ASTM E29 - 13 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A20/A20M Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe

    A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes

    A227/A227M Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

    A228/A228M Standard Specification for Steel Wire, Music Spring Quality

    A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

    A230/A230M Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

    A231/A231M Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

    A232/A232M Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

    A252 Standard Specification for Welded and Seamless Steel Pipe Piles

    A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A401/A401M Standard Specification for Steel Wire, Chromium-Silicon Alloy

    A407 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

    A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

    A451/A451M Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

    A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A524 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

    A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A641/A641M Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire

    A679/A679M Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

    A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A706/A706M Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    A713 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

    A740 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

    A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

    A749/A749M Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

    A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

    A818 Standard Specification for Coppered Carbon Steel Wire

    A821/A821M Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

    A834 Standard Specification for Common Requirements for Iron Castings for General Industrial Use

    A853 Standard Specification for Steel Wire, Carbon, for General Use

    A854/A854M Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

    A856/A856M Standard Specification for Zinc-5?% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

    A872/A872M Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

    A877/A877M Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality

    A878/A878M Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

    A890/A890M Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

    A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A929/A929M Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A957/A957M Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A958/A958M Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

    A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

    A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

    A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

    A1000/A1000M Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

    A1003/A1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

    A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1025/A1025M Standard Specification for Ferroalloys, General Requirements

    A1031/A1031M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

    A1034/A1034M Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

    A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

    A1042/A1042M Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains

    A1055/A1055M Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

    A1057/A1057M Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1058 Standard Test Methods for Mechanical Testing of Steel Products—Metric

    B5 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes

    B6 Standard Specification for Zinc

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B23 Standard Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”)

    B26/B26M Standard Specification for Aluminum-Alloy Sand Castings

    B29 Standard Specification for Refined Lead

    B30 Standard Specification for Copper Alloys in Ingot Form

    B32 Standard Specification for Solder Metal

    B37 Standard Specification for Aluminum for Use in Iron and Steel Manufacture

    B39 Standard Specification for Nickel

    B42 Standard Specification for Seamless Copper Pipe, Standard Sizes

    B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

    B48 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors

    B49 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes

    B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed

    B69 Standard Specification for Rolled Zinc

    B80 Standard Specification for Magnesium-Alloy Sand Castings

    B85/B85M Standard Specification for Aluminum-Alloy Die Castings

    B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

    B88 Standard Specification for Seamless Copper Water Tube

    B88M Standard Specification for Seamless Copper Water Tube [Metric]

    B90/B90M Standard Specification for Magnesium-Alloy Sheet and Plate

    B91 Standard Specification for Magnesium-Alloy  Forgings

    B92/B92M Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting

    B93/B93M Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings

    B94 Standard Specification for Magnesium-Alloy Die Castings

    B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

    B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

    B107/B107M Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire

    B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings

    B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

    B115 Standard Specification for Electrolytic Copper Cathode

    B129 Standard Specification for Cartridge Brass Cartridge Case Cups

    B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets

    B131 Standard Specification for Copper Alloy Bullet Jacket Cups

    B160 Standard Specification for Nickel Rod and Bar

    B162 Standard Specification for Nickel Plate, Sheet, and Strip

    B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

    B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

    B165 Standard Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube

    B166 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,

    B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an

    B168 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,

    B170 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

    B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

    B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes

    B188 Standard Specification for Seamless Copper Bus Pipe and Tube

    B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B199 Standard Specification for Magnesium-Alloy Permanent Mold Castings

    B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

    B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

    B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

    B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)

    B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

    B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)

    B216 Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes

    B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

    B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)

    B228 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors

    B229 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors

    B231/B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

    B232/B232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

    B234 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

    B234M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]

    B236 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

    B236M Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]

    B237 Standard Specification for Refined Antimony

    B240 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings

    B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

    B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

    B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

    B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

    B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

    B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

    B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire

    B251 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

    B251M Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]

    B258 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors

    B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

    B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

    B294 Standard Test Method for Hardness Testing of Cemented Carbides

    B302 Standard Specification for Threadless Copper Pipe, Standard Sizes

    B306 Standard Specification for Copper Drainage Tube (DWV)

    B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

    B313/B313M Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes

    B315 Standard Specification for Seamless Copper Alloy Pipe and Tube

    B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

    B317/B317M Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)

    B324 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes

    B327 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys

    B330 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability

    B335 Standard Specification for Nickel-Molybdenum Alloy Rod

    B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

    B339 Standard Specification for Pig Tin

    B345/B345M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems

    B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets

    B349/B349M Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application

    B350/B350M Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application

    B351/B351M Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application

    B352/B352M Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application

    B353 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)

    B359/B359M Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

    B364 Standard Specification for Tantalum and Tantalum Alloy Ingots

    B365 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire

    B367 Standard Specification for Titanium and Titanium Alloy Castings

    B372 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube

    B373 Standard Specification for Aluminum Foil for Capacitors

    B379 Standard Specification for Phosphorized Coppers—Refinery Shapes

    B381 Standard Specification for Titanium and Titanium Alloy Forgings

    B387 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire

    B391 Standard Specification for Niobium and Niobium Alloy Ingots

    B392 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

    B393 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate

    B394 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes

    B395/B395M Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

    B399/B399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors

    B400/B400M Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

    B401 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)

    B403 Standard Specification for Magnesium-Alloy Investment Castings

    B408 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

    B413 Standard Specification for Refined Silver

    B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

    B425 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar

    B429/B429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

    B432 Standard Specification for Copper and Copper Alloy Clad Steel Plate

    B438 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B439 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B440 Standard Specification for Cadmium

    B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy(UNS N06625) and Nickel-Chromium-Molybdenum-SiliconAlloy (UNS N06219) Plate, Sheet, and Strip

    B446 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar

    B447 Standard Specification for Welded Copper Tube

    B467 Standard Specification for Welded Copper-Nickel Pipe

    B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

    B476 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

    B479 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications

    B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications

    B491/B491M Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications

    B494/B494M Standard Specification for Primary Zirconium

    B498/B498M Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors

    B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

    B508 Standard Specification for Copper Alloy Strip for Flexible Metal Hose

    B511 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

    B512 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars

    B521 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes

    B523/B523M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

    B524/B524M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)

    B543/B543M Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

    B547/B547M Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

    B549 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors

    B550/B550M Standard Specification for Zirconium and Zirconium Alloy Bar and Wire

    B551/B551M Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

    B552 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants

    B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

    B557M Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

    B560 Standard Specification for Modern Pewter Alloys

    B561 Standard Specification for Refined  Platinum

    B562 Standard Specification for Refined Gold

    B564 Standard Specification for Nickel Alloy Forgings

    B569 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing

    B572 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

    B573 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod

    B574 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten

    B581 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

    B587 Standard Specification for Welded Brass Tube

    B589 Standard Specification for Refined Palladium

    B599 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip

    B606/B606M Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced

    B608 Standard Specification for Welded Copper-Alloy Pipe

    B609/B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

    B616 Standard Specification for Refined Rhodium

    B618/B618M Standard Specification for Aluminum-Alloy Investment Castings

    B621 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

    B632/B632M Standard Specification for Aluminum-Alloy Rolled Tread Plate

    B637 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

    B639 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS?R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service

    B640 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

    B643 Standard Specification for Copper-Beryllium Alloy Seamless Tube

    B644 Standard Specification for Copper Alloy Addition Agents

    B645 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys

    B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

    B652/B652M Standard Specification for Niobium-Hafnium Alloy Ingots

    B654/B654M Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate

    B655/B655M Standard Specification for Niobium-Hafnium Alloy Bar and Wire

    B658/B658M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe

    B670 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service

    B671 Standard Specification for Refined Iridium

    B672 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire

    B682 Standard Specification for Standard Metric Sizes of Electrical Conductors

    B686/B686M Standard Specification for Aluminum Alloy Castings, High-Strength

    B687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples

    B688 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

    B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

    B691 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire

    B701/B701M Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)

    B708 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip

    B711 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)

    B717 Standard Specification for Refined Ruthenium

    B718 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

    B719 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar

    B725 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe

    B736 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock

    B737 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire

    B743 Standard Specification for Seamless Copper Tube in Coils

    B746/B746M Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

    B749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

    B750 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings

    B751 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube

    B755 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

    B756 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar

    B757 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

    B758 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

    B760 Standard Specification for Tungsten Plate, Sheet, and Foil

    B775 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

    B776 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate

    B778 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)

    B779 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)

    B783 Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts

    B786/B786M Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation

    B792 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting

    B793 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds

    B800 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers

    B801 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation

    B802/B802M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)

    B803/B803M Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    B804 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe

    B811 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding

    B815 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod

    B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems

    B823 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts

    B824 Standard Specification for General Requirements for Copper Alloy Castings

    B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

    B830 Standard Specification for Uniform Test Methods and Frequency

    B833 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel

    B836 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems

    B848 Specification for Powder Forged (P/F) Ferrous Materials

    B852 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel

    B856 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)

    B857 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)

    B860 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing

    B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe

    B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe

    B863 Standard Specification for Titanium and Titanium Alloy Wire

    B865 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock

    B872 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip

    B884 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications

    B892 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings

    B894 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings

    B897 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot

    B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B903 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement

    B906 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

    B907 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders

    B919 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement

    B928/B928M Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments

    B943 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications

    B944 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

    B950 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys

    B952/B952M Standard Specification for Zinc Alloys in Ingot Form for Spin Casting

    B955/B955M Standard Specification for Aluminum-Alloy Centrifugal Castings

    B956/B956M Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

    B957/B957M Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors

    B958/B958M Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    B960 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc

    B969/B969M Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes

    B977 Standard Specification for Titanium and Titanium Ingots

    B978/B978M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)

    B982 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric OR ICP Analysis

    B988 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components

    C25 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

    C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

    C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement

    C150/C150M Standard Specification for Portland Cement

    C560 Standard Test Methods for Chemical Analysis of Graphite

    C996 Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 % 235U

    C1009 Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry

    C1365 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis

    C1494 Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder

    C1630 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations

    C1642 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials

    D202 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation

    D235 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

    D304 Standard Specification for n-Butyl Alcohol (Butanol)

    D329 Standard Specification for Acetone

    D330 Standard Specification for 2-Butoxyethanol

    D331 Standard Specification for 2-Ethoxyethanol

    D381 Standard Test Method for Gum Content in Fuels by Jet Evaporation

    D473 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

    D596 Standard Guide for Reporting Results of Analysis of Water

    D600 Standard Specification for Liquid Paint Driers

    D608 Standard Specification for Dibutyl Phthalate

    D632 Standard Specification for Sodium Chloride

    D740 Standard Specification for Methyl Ethyl Ketone

    D770 Standard Specification for Isopropyl Alcohol

    D788 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

    D841 Standard Specification for Nitration Grade Toluene

    D843 Standard Specification for Nitration Grade Xylene

    D847 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons

    D850 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials

    D852 Standard Test Method for Solidification Point of Benzene

    D910 Standard Specification for Leaded Aviation Gasolines

    D933 Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits

    D975 Standard Specification for Diesel Fuel Oils

    D1007 Standard Specification for sec-Butyl Alcohol

    D1073 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures

    D1078 Standard Test Method for Distillation Range of Volatile Organic Liquids

    D1133 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents

    D1152 Standard Specification for Methanol (Methyl Alcohol)

    D1153 Standard Specification for Methyl Isobutyl Ketone1, 2

    D1209 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

    D1257 Standard Specification for High-Gravity Glycerin

    D1353 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

    D1363 Standard Test Method for Permanganate Time of Acetone and Methanol

    D1364 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

    D1492 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration

    D1555M Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]

    D1555 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane

    D1613 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

    D1614 Standard Test Method for Alkalinity in Acetone

    D1617 Standard Test Method for Ester Value of Solvents and Thinners

    D1631 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method

    D1655 Standard Specification for Aviation Turbine Fuels

    D1686 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)

    D1718 Standard Specification for Isobutyl Acetate (95% Grade)

    D1719 Standard Specification for Isobutyl Alcoholl

    D1720 Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions

    D1836 Standard Specification for Commercial Hexanes

    D1969 Standard Specification for 2-Ethylhexanol

    D2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

    D2086 Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde

    D2087 Standard Test Method for Iron in Formaldehyde Solutions

    D2119 Standard Test Method for Aldehydes in Styrene Monomer

    D2121 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)

    D2190 Standard Specification for Vinyl Acetate

    D2191 Standard Test Method for Acetaldehyde Content of Vinyl Acetate

    D2192 Standard Test Method for Purity of Aldehydes and Ketones

    D2193 Standard Test Method for Hydroquinone in Vinyl Acetate

    D2194 Standard Test Method for Concentration of Formaldehyde Solutions

    D2270 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C

    D2340 Standard Test Method for Peroxides in Styrene Monomer

    D2359 Standard Specification for Refined Benzene-535

    D2360 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography

    D2378 Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited

    D2379 Standard Test Method for Acidity of Formaldehyde Solutions

    D2380 Standard Test Method for Methanol Content of Formaldehyde Solutions

    D2439 Standard Specification for Refined Phenol

    D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

    D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D2627 Standard Specification for Diacetone Alcohol

    D2633 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

    D2634 Standard Specification for Methyl Amyl Acetate (95?% Grade)

    D2635 Standard Specification for Methyl Isobutyl Carbinol

    D2636 Standard Specification for Hexylene Glycol

    D2693 Standard Specification for Ethylene Glycol

    D2694 Standard Specification for Diethylene Glycol

    D2804 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography

    D2827 Standard Specification for Styrene Monomer

    D2837 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

    D2915 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products

    D2916 Standard Specification for Isophorone

    D2917 Standard Specification for Methyl Isoamyl Ketone

    D3032 Standard Test Methods for Hookup Wire Insulation

    D3125 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid

    D3128 Standard Specification for 2-Methoxyethanol

    D3130 Standard Specification for n-Propyl Acetate (96 % Grade)

    D3131 Standard Specification for Isopropyl Acetate (99?% Grade)

    D3160 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)

    D3193 Standard Specification for Ethylbenzene

    D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

    D3257 Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography

    D3306 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service

    D3329 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography

    D3376 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

    D3394 Standard Test Methods for Sampling and Testing Electrical Insulating Board

    D3505 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals

    D3540 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)

    D3545 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography

    D3546 Standard Test Method for Formic Acid in Glacial Acetic Acid

    D3548 Standard Specification for Ethyl Acrylate

    D3620 Standard Specification for Glacial Acetic Acid

    D3622 Standard Specification for 1-Propanol (n-Propyl Alcohol)

    D3728 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)

    D3734 Standard Specification for High-Flash Aromatic Naphthas

    D3735 Standard Specification for VM&P Naphthas

    D3760 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography

    D3893 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography

    D3935 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material

    D4000 Standard Classification System for Specifying Plastic Materials

    D4025 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection

    D4066 Standard Classification System for Nylon Injection and Extrusion Materials (PA)

    D4067 Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

    D4077 Standard Specification for Cumene (Isopropylbenzene)

    D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

    D4203 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

    D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4349 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

    D4360 Standard Specification for Methyl n-Amyl Ketone

    D4367 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography

    D4416 Standard Specification for Acrylic Acid

    D4471 Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration

    D4485 Standard Specification for Performance of Active API Service Category Engine Oils

    D4492 Standard Test Method for Analysis of Benzene by Gas Chromatography

    D4493 Standard Test Method for Solidification Point of Bisphenol A (4,4`-Isopropylidenediphenol)

    D4549 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

    D4565 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

    D4566 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

    D4590 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry

    D4614 Standard Specification for Ethyl Acetate (All Grades)

    D4615 Standard Specification for n-Butyl Acetate (All Grades)

    D4634 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

    D4709 Standard Specification for Methyl Acrylate

    D4710 Standard Specification for Acetaldehyde

    D4734 Standard Specification for Refined Benzene-545

    D4735 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography

    D4773 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate

    D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

    D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

    D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

    D4835 Standard Specification for Propylene Glycol Monomethyl Ether Acetate

    D4836 Standard Specification for Dipropylene Glycol Monomethyl Ether

    D4837 Standard Specification for Propylene Glycol Monomethyl Ether

    D4895 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

    D4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

    D4985 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)

    D5006 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

    D5008 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography

    D5060 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography

    D5135 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography

    D5136 Standard Specification for High Purity p-Xylene

    D5137 Standard Specification for Hexyl Acetate

    D5138 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

    D5164 Standard Specification for Propylene Glycol and Dipropylene Glycol

    D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons

    D5201 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings

    D5203 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources

    D5204 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials

    D5205 Standard Classification System for Polyetherimide (PEI) Materials

    D5211 Standard Specification for Xylenes for p-Xylene Feedstock

    D5309 Standard Specification for Cyclohexane 999

    D5310 Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography

    D5336 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials

    D5386 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

    D5399 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography

    D5436 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

    D5471 Standard Specification for O-Xylene 980

    D5579 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

    D5606 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock

    D5612 Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program

    D5662 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

    D5704 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

    D5713 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography

    D5740 Standard Guide for Writing Material Standards in the Classification D4000 Format

    D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

    D5808 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D5857 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

    D5871 Standard Specification for Benzene for Cyclohexane Feedstock

    D5917 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

    D5927 Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

    D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

    D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

    D6026 Standard Practice for Using Significant Digits in Geotechnical Data

    D6069 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D6080 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

    D6121 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

    D6142 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography

    D6143 Standard Test Method for Iron Content of Bisphenol A (4,4 - Isopropylidenediphenol)

    D6144 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography

    D6205 Standard Practice for Calibration of the James Static Coefficient of Friction Machine

    D6227 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

    D6229 Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

    D6247 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

    D6338 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods

    D6339 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

    D6358 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods

    D6367 Standard Specification for AMS (α-Methylstyrene)

    D6394 Standard Specification for Sulfone Plastics (SP)

    D6443 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

    D6526 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography

    D6563 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography

    D6585 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

    D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

    D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

    D6721 Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry

    D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure(0.4?% Fuel Sulfur) and 1N Procedure(0.04?% Fuel Sulfur)

    D6778 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

    D6779 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

    D6792 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories

    D6835 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

    D6837 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

    D6838 Standard Test Method for Cummins M11 High Soot Test

    D6865 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM&

    D6875 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor

    D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

    D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

    D6975 Standard Test Method for Cummins M11 EGR Test

    D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

    D6987/D6987M Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

    D7011 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

    D7057 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)

    D7090 Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography

    D7124 Standard Specification for Benzene for Use with Zeolite Based Catalysts

    D7125 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process

    D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

    D7183 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

    D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D7185 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene

    D7193 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

    D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

    D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

    D7223 Standard Specification for Aviation Certification Turbine Fuel

    D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications

    D7266 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)

    D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

    D7358 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit

    D7359 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

    D7360 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration

    D7375 Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration

    D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

    D7436 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology

    D7452 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading

    D7457 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D7460 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending

    D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

    D7468 Standard Test Method for Cummins ISM Test

    D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

    D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

    D7518 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service

    D7536 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7547 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline

    D7549 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

    D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

    D7583 Standard Test Method for John Deere Coolant Cavitation Test

    D7589 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

    D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel

    D7704 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration

    D7714 Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service

    D7715 Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines

    D7719 Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline

    D7776 Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories

    D7856 Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space

    D7862 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

    D7871 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)

    D7881 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode

    D7882 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode

    D7883 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography

    D7884 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography

    E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

    E10 Standard Test Method for Brinell Hardness of Metallic Materials

    E18 Standard Test Methods for Rockwell Hardness of Metallic Materials

    E21 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

    E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

    E37 Standard Test Methods for Chemical Analysis of Pig Lead

    E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

    E74 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines

    E139 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

    E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

    E252 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement

    E345 Standard Test Methods of Tension Testing of Metallic Foil

    E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

    E351 Standard Test Methods for Chemical Analysis of Cast Iron—All Types

    E352 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

    E353 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

    E354 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

    E363 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium

    E367 Standard Test Methods for Chemical Analysis of Ferroniobium

    E372 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration

    E384 Standard Test Method for Knoop and Vickers Hardness of Materials

    E396 Standard Test Methods for Chemical Analysis of Cadmium

    E439 Standard Test Methods for Chemical Analysis of Beryllium

    E478 Standard Test Methods for Chemical Analysis of Copper Alloys

    E531 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials

    E536 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys

    E581 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

    E646 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

    E667 Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers

    E766 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope

    E945 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry

    E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques

    E1097 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

    E1119 Standard Specification for Industrial Grade Ethylene Glycol

    E1277 Standard Test Method for Chemical Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry

    E1367 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates

    E1446 Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry

    E1450 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

    E1473 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

    E1568 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

    E1587 Standard Test Methods for Chemical Analysis of Refined Nickel

    E1600 Standard Test Method for Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry

    E1659 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet

    E1706 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates

    E1771 Standard Test Method for Determination of Copper in Anode and Blister Copper

    E1805 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry

    E1898 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

    E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

    E1950 Standard Practice for Reporting Results from Methods of Chemical Analysis

    E2050 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

    E2294 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

    E2295 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels

    E2296 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry

    E2428 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines

    E2470 Standard Specification for Polyester Grade Ethylene Glycol

    E2624 Standard Practice for Torque Calibration of Testing Machines and Devices

    E2655 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods

    E2824 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method

    E2867 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry

    F29 Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications

    F30 Standard Specification for Iron-Nickel Sealing Alloys

    F31 Standard Specification for Nickel-Chromium-Iron Sealing Alloys

    F67 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)

    F68 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices

    F75 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)

    F79 Standard Specification for Type 101 Sealing Glass

    F90 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)

    F105 Standard Specification for Type 58 Borosilicate Sealing Glass

    F136 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)

    F138 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

    F139 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)

    F256 Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium

    F467M Standard Specification for Nonferrous Nuts for General Use (Metric)

    F467 Standard Specification for Nonferrous Nuts for General Use

    F468M Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)

    F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

    F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments

    F560 Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)

    F562 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)

    F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

    F594 Standard Specification for Stainless Steel Nuts

    F620 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition

    F621 Standard Specification for Stainless Steel Forgings for Surgical Implants

    F688 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)

    F738M Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs

    F799 Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)

    F836M Standard Specification for Style 1 Stainless Steel Metric Nuts

    F901 Standard Specification for Aluminum Transmission Tower Bolts and Nuts

    F961 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)

    F1058 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)

    F1062 Standard Test Method for Verification of Ski Binding Test Devices

    F1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

    F1091 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)

    F1295 Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)

    F1314 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

    F1350 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)

    F1377 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)

    F1466 Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications

    F1472 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)

    F1537 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)

    F1580 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants

    F1586 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)

    F1594 Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications

    F1624 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

    F1684 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications

    F1713 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)

    F1813 Standard Specification for Wrought Titanium–12 Molybdenum–6 Zirconium–2 Iron Alloy for Surgical Implant (UNS R58120)

    F1940 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

    F2063 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants

    F2066 Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)

    F2146 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)

    F2229 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)

    F2232 Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear

    F2281 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

    F2282 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

    F2384 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)

    F2576 Standard Terminology Relating to Declarable Substances in Materials

    F2581 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)

    F2617 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry

    F2885 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications

    F2886 Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications

    F2924 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion

    F2980 Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)

    F2989 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications

    F3001 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion

    F3042 Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws

    F3046 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)

    F3055 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion

    F3056 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion

    G2/G2M Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods

    E456 Terminology Relating to Quality and Statistics

    E2282 Guide for Defining the Test Result of a Test Method