ASTM E275 - 08(2013) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement

    C1580 Standard Test Method for Water-Soluble Sulfate in Soil

    D516 Standard Test Method for Sulfate Ion in Water

    D859 Standard Test Method for Silica in Water

    D1068 Standard Test Methods for Iron in Water

    D1252 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water

    D1385 Standard Test Method for Hydrazine in Water

    D1426 Standard Test Methods for Ammonia Nitrogen In Water

    D1687 Standard Test Methods for Chromium in Water

    D1768 Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption

    D1840 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

    D2008 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

    D2036 Standard Test Methods for Cyanides in Water

    D2124 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique

    D2269 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

    D2621 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints

    D2702 Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics

    D2914 Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)

    D2972 Standard Test Methods for Arsenic in Water

    D3082 Standard Test Method for Boron in Water

    D3124 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry

    D3168 Standard Practice for Qualitative Identification of Polymers in Emulsion Paints

    D3414 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy

    D3559 Standard Test Methods for Lead in Water

    D3594 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers

    D3650 Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis

    D3867 Standard Test Methods for Nitrite-Nitrate in Water

    D3869 Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines

    D3923 Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices

    D4130 Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines

    D4165 Standard Test Method for Cyanogen Chloride in Water 

    D4193 Standard Test Method for Thiocyanate in Water

    D4282 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion

    D4763 Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy

    D5086 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry

    D5412 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water

    D5463 Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water

    D5831 Standard Test Method for Screening Fuels in Soils

    D6122 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

    D6187 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence

    D6248 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

    D6258 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

    D6342 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

    D6501 Standard Test Method for Phosphonate in Brines

    D6748 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

    D6888 Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

    D6953 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

    E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

    E169 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis

    E387 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method

    E394 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method

    E424 Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials

    E512 Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation

    E685 Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography

    E903 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres

    E925 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm

    E958 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers

    E1026 Standard Practice for Using the Fricke Dosimetry System

    E1164 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation

    E1341 Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry

    E1615 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method

    E1655 Standard Practices for Infrared Multivariate Quantitative Analysis

    E1866 Standard Guide for Establishing Spectrophotometer Performance Tests

    E2056 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures

    E2193 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)

    E2304 Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System

    E2313 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)

    E2808 Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis

    G178 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E131 Terminology Relating to Molecular Spectroscopy

    E168 Practices for General Techniques of Infrared Quantitative Analysis

    E169 Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis

    E387 Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method

    E958 Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers