A991/A991M Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

C113 Standard Test Method for Reheat Change of Refractory Brick

C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

C210 Standard Test Method for Reheat Change of Insulating Firebrick

C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

C372 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method

C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

C835 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C

C1041 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers

C1043 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources

C1211 Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures

C1291 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics

C1337 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures

C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

C1425 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures

C1465 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures

D1120 Standard Test Method for Boiling Point of Engine Coolants

D1384 Standard Test Method for Corrosion Test for Engine Coolants in Glassware

D2879 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

D3711 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors

D3791/D3791M Standard Practice for Evaluating the Effects of Heat on Asphalts

D4611 Standard Test Method for Specific Heat of Rock and Soil

D4693 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

D4857 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

D4858 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

D5207 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials

D5869 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials

D5958 Standard Practices for Preparation of Oil-Based Ink Resin Solutions

D6194 Standard Test Method for Glow-Wire Ignition of Materials

D6200 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

D6482 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

D6549 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

D7646 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis

E207 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties

E220 Standard Test Method for Calibration of Thermocouples By Comparison Techniques

E344 Terminology Relating to Thermometry and Hydrometry

E574 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation

E585/E585M Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable

E601 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air

E608/E608M Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples

E633 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air

E644 Standard Test Methods for Testing Industrial Resistance Thermometers

E696 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire

E839 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable

E1129/E1129M Standard Specification for Thermocouple Connectors

E1159 Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum

E1225 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique

E1232 Standard Test Method for Temperature Limit of Flammability of Chemicals

E1350 Standard Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service

E1684 Standard Specification for Miniature Thermocouple Connectors

E2181/E2181M Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable

E2536 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests

E2584 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter

E2714 Standard Test Method for Creep-Fatigue Testing

E2730 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits

E2820 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors

F526 Standard Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests

There are currently no referencing documents for this standard.