C271/C271M Standard Test Method for Density of Sandwich Core Materials

C366/C366M Standard Test Methods for Measurement of Thickness of Sandwich Cores

C686 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation

C748 Standard Test Method for Rockwell Hardness of Graphite Materials

C870 Standard Practice for Conditioning of Thermal Insulating Materials

C886 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

D1985 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

D2063/D2063M Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment

D2275 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface

D2865M Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing

D2979 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine

D3111 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method

D3121 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball

D3528 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading

D3808 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion

D3924 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials

D3931 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading

D4272 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop

D4332 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing

D4338 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend

D4498 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives

D4565 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

D5167 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

D5181 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester

D5329 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements

D5420 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

D6195 Standard Test Methods for Loop Tack

D6463/D6463M Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading

E9 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

E41 Terminology Relating to Conditioning

E430 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry

E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

E681 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)

E754 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints

F88/F88M Standard Test Method for Seal Strength of Flexible Barrier Materials

F145 Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies

F392/F392M Standard Test Method for Flex Durability of Flexible Barrier Materials

F510 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method

F739 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact

F924 Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings

F970 Standard Test Method for Static Load Limit

F1383 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact

F1670 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood

F1671 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System

F1819 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique

F1862 Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)

F1921 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs

F2101 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus

F2302 Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant

F2588 Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles

G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

There are currently no referencing documents for this standard.

There are currently no reference documents for this standard.