A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

A217/A217M Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

A266/A266M Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

A289/A289M Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service

A336/A336M Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

A352/A352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

A356/A356M Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

A372/A372M Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

A426/A426M Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

A436 Standard Specification for Austenitic Gray Iron Castings

A451/A451M Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

A487/A487M Standard Specification for Steel Castings Suitable for Pressure Service

A579/A579M Standard Specification for Superstrength Alloy Steel Forgings

A608/A608M Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

A632 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

A649/A649M Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

A671/A671M Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

A672/A672M Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

A691/A691M Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

A758/A758M Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

A765/A765M Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A788/A788M Standard Specification for Steel Forgings, General Requirements

A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

A834 Standard Specification for Common Requirements for Iron Castings for General Industrial Use

A872/A872M Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

A874/A874M Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

A891/A891M Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

A903/A903M Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

A952/A952M Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

A957/A957M Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A960/A960M Standard Specification for Common Requirements for Wrought Steel Piping Fittings

A961/A961M Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

A988/A988M Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

A989/A989M Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

A995/A995M Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

A1001 Standard Specification for High Strength Steel Castings in Heavy Sections

A1049/A1049M Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

B26/B26M Standard Specification for Aluminum-Alloy Sand Castings

B80 Standard Specification for Magnesium-Alloy Sand Castings

B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings

B199 Standard Specification for Magnesium-Alloy Permanent Mold Castings

B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

B366 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

B367 Standard Specification for Titanium and Titanium Alloy Castings

B403 Standard Specification for Magnesium-Alloy Investment Castings

B618/B618M Standard Specification for Aluminum-Alloy Investment Castings

B686/B686M Standard Specification for Aluminum Alloy Castings, High-Strength

B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

B851 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish

B884 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications

B955/B955M Standard Specification for Aluminum-Alloy Centrifugal Castings

B969/B969M Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes

C773 Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials

C1175 Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics

C1572 Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities

D2442 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications

E433 Standard Reference Photographs for Liquid Penetrant Inspection

E543 Standard Specification for Agencies Performing Nondestructive Testing

E608/E608M Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples

E709 Standard Guide for Magnetic Particle Testing

E839 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable

E1208 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process

E1209 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

E1210 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process

E1219 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

E1220 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process

E1417/E1417M Standard Practice for Liquid Penetrant Testing

E1418 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process

E2181/E2181M Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable

E2256 Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service

E2297 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods

F75 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)

F109 Standard Terminology Relating to Surface Imperfections on Ceramics

F467M Standard Specification for Nonferrous Nuts for General Use (Metric)

F467 Standard Specification for Nonferrous Nuts for General Use

F468M Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)

F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

F601 Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants

F620 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition

F621 Standard Specification for Stainless Steel Forgings for Surgical Implants

F799 Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)

F961 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)

F1108 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)

F2885 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications

F2886 Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications

There are currently no referencing documents for this standard.

There are currently no reference documents for this standard.