ASTM E135 - 14a Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

    B890 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry

    B953 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis

    B954 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry

    B985 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis

    C125 Standard Terminology Relating to Concrete and Concrete Aggregates

    C1109 Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry

    C1111 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy

    C1254 Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence

    C1255 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy

    C1271 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

    C1301 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

    C1343 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence

    C1345 Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry

    C1456 Standard Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)

    C1474 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry

    C1517 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy

    C1770 Standard Test Method for Determination of Loose and Tapped Bulk Density of Plutonium Oxide

    D5184 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

    D5185 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5681 Standard Terminology for Waste and Waste Management

    D6247 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D6311 Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design

    D6689 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

    D7691 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    E32 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition

    E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

    E37 Standard Test Methods for Chemical Analysis of Pig Lead

    E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

    E55 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

    E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

    E88 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition

    E131 Standard Terminology Relating to Molecular Spectroscopy

    E247 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

    E248 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

    E255 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

    E276 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials

    E278 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry

    E279 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test

    E284 Standard Terminology of Appearance

    E305 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves

    E314 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques

    E316 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry

    E322 Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E342 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry

    E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

    E351 Standard Test Methods for Chemical Analysis of Cast Iron—All Types

    E352 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

    E363 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium

    E367 Standard Test Methods for Chemical Analysis of Ferroniobium

    E372 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration

    E382 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets

    E389 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials

    E396 Standard Test Methods for Chemical Analysis of Cadmium

    E406 Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis

    E415 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry

    E439 Standard Test Methods for Chemical Analysis of Beryllium

    E463 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry

    E465 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry

    E478 Standard Test Methods for Chemical Analysis of Copper Alloys

    E507 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry

    E508 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry

    E520 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry

    E536 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys

    E539 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry

    E572 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E581 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

    E631 Standard Terminology of Building Constructions

    E716 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis

    E738 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry

    E815 Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry

    E826 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry

    E841 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry

    E877 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties

    E878 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry

    E882 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory

    E945 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry

    E1009 Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel

    E1010 Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting

    E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques

    E1070 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry

    E1085 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry

    E1086 Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

    E1097 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

    E1172 Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer

    E1184 Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry

    E1251 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

    E1257 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis

    E1277 Standard Test Method for Chemical Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry

    E1282 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

    E1306 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition

    E1329 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis

    E1335 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

    E1361 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis

    E1409 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion

    E1446 Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry

    E1447 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

    E1458 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles

    E1473 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

    E1479 Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers

    E1552 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry

    E1568 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

    E1569 Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique

    E1587 Standard Test Methods for Chemical Analysis of Refined Nickel

    E1600 Standard Test Method for Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry

    E1601 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

    E1605 Standard Terminology Relating to Lead in Buildings

    E1621 Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E1659 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet

    E1763 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods

    E1771 Standard Test Method for Determination of Copper in Anode and Blister Copper

    E1805 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry

    E1806 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition

    E1832 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer

    E1833 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition

    E1834 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry

    E1835 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry

    E1852 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry

    E1898 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

    E1914 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis

    E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

    E1916 Standard Guide for Identification of Mixed Lots of Metals

    E1917 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry

    E1938 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry

    E1941 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

    E1950 Standard Practice for Reporting Results from Methods of Chemical Analysis

    E1999 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry

    E2027 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials

    E2050 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

    E2093 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

    E2209 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry

    E2242 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure

    E2293 Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury

    E2294 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

    E2295 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels

    E2296 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry

    E2371 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)

    E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E2575 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys

    E2594 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)

    E2626 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals

    E2792 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion

    E2823 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)

    E2824 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method

    E2857 Standard Guide for Validating Analytical Methods

    E2941 Standard Practice for Nitric Acid-Extraction of Elements from Ores and Related Metallurgical Materials by Closed Vessel Microwave Heating

    F561 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

    F1593 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer

    F1710 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer

    F1845 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer

    F1894 Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness

    F2405 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer

    F2617 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry

    F2853 Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams

    F2980 Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E1914 Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis

    E2437 Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials

    E2438 Practice for Implementing Standard Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials