ASTM E1316 - 14 Standard Terminology for Nondestructive Examinations


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    B886 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

    B891 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer

    C215 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens

    C597 Standard Test Method for Pulse Velocity Through Concrete

    C1175 Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics

    C1331 Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method

    C1332 Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique

    C1383 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method

    C1624 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing

    C1740 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method

    D1746 Standard Test Method for Transparency of Plastic Sheeting

    D7006 Standard Practice for Ultrasonic Testing of Geomembranes

    E94 Standard Guide for Radiographic Examination

    E114 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

    E127 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks

    E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

    E164 Standard Practice for Contact Ultrasonic Testing of Weldments

    E165/E165M Standard Practice for Liquid Penetrant Examination for General Industry

    E186 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings

    E192 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications

    E213 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing

    E215 Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube

    E242 Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed

    E243 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes

    E272 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings

    E273 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

    E280 Standard Reference Radiographs for Heavy-Walled (4½ to 12-in. (114 to 305-mm)) Steel Castings

    E309 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

    E310 Standard Reference Radiographs for Tin Bronze Castings

    E317 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

    E376 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods

    E390 Standard Reference Radiographs for Steel Fusion Welds

    E426 Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

    E428 Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

    E431 Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices

    E446 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness

    E493/E493M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode

    E494 Standard Practice for Measuring Ultrasonic Velocity in Materials

    E498/E498M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode

    E499/E499M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode

    E505 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings

    E515 Standard Practice for Leaks Using Bubble Emission Techniques

    E543 Standard Specification for Agencies Performing Nondestructive Testing

    E545 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination

    E566 Standard Practice for Electromagnetic (Eddy Current) Sorting of Ferrous Metals

    E569/E569M Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

    E570 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

    E571 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

    E587 Standard Practice for Ultrasonic Angle-Beam Contact Testing

    E588 Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method

    E592 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60

    E650/E650M Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

    E664/E664M Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

    E689 Standard Reference Radiographs for Ductile Iron Castings

    E690 Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes

    E703 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals

    E709 Standard Guide for Magnetic Particle Testing

    E746 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems

    E747 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

    E748 Standard Practices for Thermal Neutron Radiography of Materials

    E749/E749M Standard Practice for Acoustic Emission Monitoring During Continuous Welding

    E750 Standard Practice for Characterizing Acoustic Emission Instrumentation

    E751/E751M Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding

    E797/E797M Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

    E801 Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices

    E802 Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness

    E803 Standard Test Method for Determining the L/D?Ratio of Neutron Radiography Beams

    E999 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing

    E1000 Standard Guide for Radioscopy

    E1001 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves

    E1002 Standard Practice for Leaks Using Ultrasonics

    E1003 Standard Practice for Hydrostatic Leak Testing

    E1004 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method

    E1025 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology

    E1030 Standard Test Method for Radiographic Examination of Metallic Castings

    E1032 Standard Test Method for Radiographic Examination of Weldments

    E1033 Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature

    E1065/E1065M Standard Guide for Evaluating Characteristics of Ultrasonic Search Units

    E1066/E1066M Standard Practice for Ammonia Colorimetric LeakTesting

    E1067/E1067M Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

    E1079 Standard Practice for Calibration of Transmission Densitometers

    E1106 Standard Test Method for Primary Calibration of Acoustic Emission Sensors

    E1114 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources

    E1118/E1118M Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)

    E1135 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants

    E1139/E1139M Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

    E1158 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material

    E1161 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components

    E1208 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process

    E1209 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

    E1210 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process

    E1211/E1211M Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors

    E1213 Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems

    E1219 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

    E1220 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process

    E1254 Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

    E1255 Standard Practice for Radioscopy

    E1311 Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems

    E1312 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature

    E1320 Standard Reference Radiographs for Titanium Castings

    E1324 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

    E1390 Standard Specification for Illuminators Used for Viewing Industrial Radiographs

    E1411 Standard Practice for Qualification of Radioscopic Systems

    E1416 Standard Test Method for Radioscopic Examination of Weldments

    E1417/E1417M Standard Practice for Liquid Penetrant Testing

    E1418 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process

    E1419 Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission

    E1441 Standard Guide for Computed Tomography (CT) Imaging

    E1444/E1444M Standard Practice for Magnetic Particle Testing

    E1475 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

    E1495/E1495M Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints

    E1543 Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems

    E1570 Standard Practice for Computed Tomographic (CT) Examination

    E1571 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope

    E1603/E1603M Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode

    E1606 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes

    E1629 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes

    E1647 Standard Practice for Determining Contrast Sensitivity in Radioscopy

    E1648 Standard Reference Radiographs for Examination of Aluminum Fusion Welds

    E1672 Standard Guide for Computed Tomography (CT) System Selection

    E1685 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique

    E1695 Standard Test Method for Measurement of Computed Tomography (CT) System Performance

    E1734 Standard Practice for Radioscopic Examination of Castings

    E1735 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV

    E1736 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels

    E1742/E1742M Standard Practice for Radiographic Examination

    E1774 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)

    E1781/E1781M Standard Practice for Secondary Calibration of Acoustic Emission Sensors

    E1814 Standard Practice for Computed Tomographic (CT) Examination of Castings

    E1815 Standard Test Method for Classification of Film Systems for Industrial Radiography

    E1816 Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

    E1817 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

    E1862 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers

    E1888/E1888M Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores

    E1897 Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers

    E1901 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

    E1930/E1930M Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

    E1931 Standard Guide for X-Ray Compton Scatter Tomography

    E1932 Standard Guide for Acoustic Emission Examination of Small Parts

    E1933 Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers

    E1934 Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

    E1935 Standard Test Method for Calibrating and Measuring CT Density

    E1936 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems

    E1955 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs

    E1961 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units

    E1962 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

    E2001 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts

    E2002 Standard Practice for Determining Total Image Unsharpness in Radiology

    E2003 Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators

    E2007 Standard Guide for Computed Radiography

    E2023 Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators

    E2024/E2024M Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector

    E2033 Standard Practice for Computed Radiology (Photostimulable Luminescence Method)

    E2072 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings

    E2073 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings

    E2076/E2076M Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission

    E2096/E2096M Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing

    E2104 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components

    E2191/E2191M Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

    E2192 Standard Guide for Planar Flaw Height Sizing by Ultrasonics

    E2223 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics

    E2261/E2261M Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique

    E2297 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods

    E2337/E2337M Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing

    E2338 Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards

    E2339 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

    E2374 Standard Guide for Acoustic Emission System Performance Verification

    E2375 Standard Practice for Ultrasonic Testing of Wrought Products

    E2422 Standard Digital Reference Images for Inspection of Aluminum Castings

    E2446 Standard Practice for Classification of Computed Radiology Systems

    E2478 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

    E2479 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves

    E2491 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

    E2533 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications

    E2534 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

    E2580 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

    E2581 Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications

    E2582 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications

    E2597/E2597M Standard Practice for Manufacturing Characterization of Digital Detector Arrays

    E2598/E2598M Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers

    E2660 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications

    E2661/E2661M Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications

    E2662 Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

    E2663 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

    E2669 Standard Digital Reference Images for Titanium Castings

    E2698 Standard Practice for Radiological Examination Using Digital Detector Arrays

    E2699 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

    E2700 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays

    E2736 Standard Guide for Digital Detector Array Radiology

    E2737 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

    E2738 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

    E2767 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods

    E2775 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction

    E2861 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams

    E2862 Standard Practice for Probability of Detection Analysis for Hit/Miss Data

    E2863 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization

    E2868 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness

    E2869 Standard Digital Reference Images for Magnesium Castings

    E2884 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays

    E2904 Standard Practice for Characterization and Verification of Phased Array Probes

    E2905/E2905M Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods

    E2906/E2906M Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles

    E2907/E2907M Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing

    E2928/E2928M Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique

    E2929 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction

    E2930 Standard Practice for Pressure Decay Leak Test Method

    E2934 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods

    E2983 Standard Guide for Application of Acoustic Emission for Structural Health Monitoring

    F640 Standard Test Methods for Determining Radiopacity for Medical Use

    F792 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems

    F1430/F1430M Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments

    F1512 Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies

    F2895 Standard Practice for Digital Radiography of Cast Metallic Implants


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    There are currently no reference documents for this standard.