B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)

B579 Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)

B942 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations

C50 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

C92 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials

C271/C271M Standard Test Method for Density of Sandwich Core Materials

C273/C273M Standard Test Method for Shear Properties of Sandwich Core Materials

C297/C297M Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

C363/C363M Standard Test Method for Node Tensile Strength of Honeycomb Core Materials

C364/C364M Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions

C365/C365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores

C366/C366M Standard Test Methods for Measurement of Thickness of Sandwich Cores

C393/C393M Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

C429 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture

C480/C480M Standard Test Method for Flexure Creep of Sandwich Constructions

C613/C613M Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction

C684 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens

C823/C823M Standard Practice for Examination and Sampling of Hardened Concrete in Constructions

C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

C1292 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

C1425 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures

C1469 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

C1470 Standard Guide for Testing the Thermal Properties of Advanced Ceramics

C1532 Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction

D75/D75M Standard Practice for Sampling Aggregates

D642 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads

D880 Standard Test Method for Impact Testing for Shipping Containers and Systems

D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures

D999 Standard Test Methods for Vibration Testing of Shipping Containers

D1060 Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present

D1596 Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material

D1975 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails

D2221 Standard Test Method for Creep Properties of Package Cushioning Materials

D2229 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber

D2344/D2344M Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

D2442 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications

D2525 Standard Practice for Sampling Wool for Moisture

D2661 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens

D2940/D2940M Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

D3039/D3039M Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

D3198 Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures

D3330/D3330M Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape

D3332 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines

D3410/D3410M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading

D3434 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

D3469 Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures

D3472 Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures

D3479/D3479M Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials

D3481 Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions

D3528 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading

D3580 Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products

D3652/D3652M Standard Test Method for Thickness of Pressure-Sensitive Tapes

D3654/D3654M Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes

D3665 Standard Practice for Random Sampling of Construction Materials

D3759/D3759M Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape

D3811/D3811M Standard Test Method for Unwind Force of Pressure-Sensitive Tapes

D3813/D3813M Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes

D3816/D3816M Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes

D3833/D3833M Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes

D3889/D3889M Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature

D3968 Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures

D3987 Standard Test Method for Shake Extraction of Solid Waste with Water

D4003 Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems

D4255/D4255M Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

D4577 Standard Test Method for Compression Resistance of a Container Under Constant Load

D4678 Standard Practice for Rubber - Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials

D4687 Standard Guide for General Planning of Waste Sampling

D5112 Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products

D5233 Standard Test Method for Single Batch Extraction Method for Wastes

D5264 Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester

D5265 Standard Test Method for Bridge Impact Testing

D5276 Standard Test Method for Drop Test of Loaded Containers by Free Fall

D5277 Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester

D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges

D5363 Standard Specification for Anaerobic Single-Component Adhesives (AN)

D5375/D5375M Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock

D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

D5448/D5448M Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

D5449/D5449M Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

D5450/D5450M Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

D5458 Standard Test Method for Peel Cling of Stretch Wrap Film

D5459 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film

D5467/D5467M Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam

D5487 Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines

D5528 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

D5571 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity

D5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber

D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

D5639/D5639M Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements

D5651 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials

D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

D5748 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film

D5793 Standard Test Method for Binding Sites Per Unit Length or Width of Pile Yarn Floor Coverings

D5823 Standard Test Method for Tuft Height of Pile Floor Coverings

D5848 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings

D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

D5961/D5961M Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

D6115 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites

D6252/D6252M Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

D6264/D6264M Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force

D6295/D6295M Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape

D6344 Standard Test Method for Concentrated Impacts to Transport Packages

D6415/D6415M Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

D6484/D6484M Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

D6544 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing

D6633 Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser

D6641/D6641M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

D6653/D6653M Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method

D6654 Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser

D6671/D6671M Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites

D6719 Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering

D6804 Standard Guide for Hand Hole Design in Corrugated Boxes

D6859 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings

D6873/D6873M Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates

D7012 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

D7026 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis

D7030 Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine

D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature

D7078/D7078M Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

D7136/D7136M Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

D7137/D7137M Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

D7205/D7205M Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars

D7241 Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering

D7248/D7248M Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens

D7249/D7249M Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure

D7250/D7250M Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness

D7257 Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions

D7264/D7264M Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials

D7291/D7291M Standard Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

D7332/D7332M Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

D7336/D7336M Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials

D7387 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)

D7390 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments

D7430 Standard Practice for Mechanical Sampling of Coal

D7522/D7522M Standard Test Method for Pull-Off Strength for FRP Bonded to Concrete Substrate

D7565/D7565M Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures

D7615/D7615M Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates

D7616/D7616M Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures

D7617/D7617M Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars

E105 Standard Practice for Probability Sampling Of Materials

E141 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling

E384 Standard Test Method for Knoop and Vickers Hardness of Materials

E566 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals

E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

E688 Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing

E701 Standard Test Methods for Municipal Ferrous Scrap

E703 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals

E956 Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)

E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

E1004 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method

E1367 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates

E1402 Standard Terminology Relating to Sampling

E1432 Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size

E1706 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates

E2141 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units

E2548 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis

E2655 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods

F355 Standard Test Method for Impact Attenuation of Playing Surface Systems and Materials

F384 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices

F510 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method

F543 Standard Specification and Test Methods for Metallic Medical Bone Screws

F564 Standard Specification and Test Methods for Metallic Bone Staples

F628 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

F766/F766M Standard Test Method for Melting Point of Waxes

F778 Standard Methods for Gas Flow Resistance Testing of Filtration Media

F1015 Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces

F1428 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

F1499 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

F1541 Standard Specification and Test Methods for External Skeletal Fixation Devices

F1645/F1645M Standard Test Method for Water Migration in Honeycomb Core Materials

F1702 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus

F2232 Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear

F2502 Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants

G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus

G76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets

G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test

G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests

G115 Standard Guide for Measuring and Reporting Friction Coefficients

G132 Standard Test Method for Pin Abrasion Testing

G137 Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration

G143 Standard Test Method for Measurement of Web/Roller Friction Characteristics

G176 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method