ASTM E1164 - 12 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C1510 Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry

    C1649 Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated

    C1650 Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated

    D1535 Standard Practice for Specifying Color by the Munsell System

    D1729 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials

    D1746 Standard Test Method for Transparency of Plastic Sheeting

    D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

    D3134 Standard Practice for Establishing Color and Gloss Tolerances

    D3451 Standard Guide for Testing Coating Powders and Powder Coatings

    D3794 Standard Guide for Testing Coil Coatings

    D4838 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints

    D4890 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols

    D4941 Standard Practice for Preparing Drawdowns of Artists' Paste Paints

    D4956 Standard Specification for Retroreflective Sheeting for Traffic Control

    D4960 Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials

    D5326 Standard Test Method for Color Development in Tinted Latex Paints

    D5531 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings

    D6961/D6961M Standard Test Method for Color Measurement of Flax Fiber

    D7195 Standard Guide for Protocol for Setting Color Specifications for a Material

    E179 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials

    E284 Standard Terminology of Appearance

    E308 Standard Practice for Computing the Colors of Objects by Using the CIE System

    E313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates

    E805 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials

    E991 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method

    E1247 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry

    E1331 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry

    E1345 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements

    E1347 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

    E1348 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry

    E1349 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry

    E1360 Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System

    E1477 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers

    E2153 Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color

    E2175 Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers

    E2214 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments

    E2301 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry

    E2539 Standard Practice for Multiangle Color Measurement of Interference Pigments

    E2630 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D1003 Test Method for Haze and Luminous Transmittance of Transparent Plastics

    E179 Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials

    E259 Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries

    E275 Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers

    E284 Terminology of Appearance

    E308 Practice for Computing the Colors of Objects by Using the CIE System

    E387 Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method

    E805 Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials

    E925 Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm

    E958 Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers

    E991 Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method

    E1767 Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials

    E2153 Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color

    E2194 Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials