ASTM E11 - 13 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A99 Standard Specification for Ferromanganese

    A100 Standard Specification for Ferrosilicon

    A132 Standard Specification for Ferromolybdenum

    A481 Standard Specification for Chromium Metal

    A482/A482M Standard Specification for Ferrochrome-Silicon

    A483/A483M Standard Specification for Silicomanganese

    A550 Standard Specification for Ferrocolumbium

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A601/A601M Standard Specification for Electrolytic Manganese Metal

    A610 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A749/A749M Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A835/A835M Standard Specification for Sizes of Ferroalloys and Alloy Additives

    A922 Standard Specification for Silicon Metal

    B214 Standard Test Method for Sieve Analysis of Metal Powders

    B851 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish

    C5 Standard Specification for Quicklime for Structural Purposes

    C24 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials

    C28/C28M Standard Specification for Gypsum Plasters

    C29/C29M Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate

    C33/C33M Standard Specification for Concrete Aggregates

    C35 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster

    C59/C59M Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

    C61/C61M Standard Specification for Gypsum Keene's Cement

    C87/C87M Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

    C88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

    C92 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials

    C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

    C117 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

    C123/C123M Standard Test Method for Lightweight Particles in Aggregate

    C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

    C131 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C135 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion

    C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

    C142/C142M Standard Test Method for Clay Lumps and Friable Particles in Aggregates

    C146 Standard Test Methods for Chemical Analysis of Glass Sand

    C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

    C172/C172M Standard Practice for Sampling Freshly Mixed Concrete

    C183 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement

    C186 Standard Test Method for Heat of Hydration of Hydraulic Cement

    C225 Standard Test Methods for Resistance of Glass Containers to Chemical Attack

    C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

    C232/C232M Standard Test Method for Bleeding of Concrete

    C233/C233M Standard Test Method for Air-Entraining Admixtures for Concrete

    C265 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar

    C279 Standard Specification for Chemical-Resistant Masonry Units

    C285 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel

    C289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)

    C295/C295M Standard Guide for Petrographic Examination of Aggregates for Concrete

    C311/C311M Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

    C323 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays

    C325 Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays

    C329 Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials

    C331/C331M Standard Specification for Lightweight Aggregates for Concrete Masonry Units

    C332 Standard Specification for Lightweight Aggregates for Insulating Concrete

    C357 Standard Test Method for Bulk Density of Granular Refractory Materials

    C371 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders

    C374 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)

    C403/C403M Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

    C429 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture

    C430 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve

    C458/C458M Standard Test Method for Organic Fiber Content of Asbestos-Cement Products

    C471M Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

    C472 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

    C492 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite

    C500/C500M Standard Test Methods for Asbestos-Cement Pipe

    C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

    C595/C595M Standard Specification for Blended Hydraulic Cements

    C602 Standard Specification for Agricultural Liming Materials

    C641 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates

    C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size

    C706 Standard Specification for Limestone for Animal Feed Use

    C708 Specification for Nuclear-Grade Beryllium Oxide Powder

    C750 Standard Specification for Nuclear-Grade Boron Carbide Powder

    C753 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder

    C778 Standard Specification for Standard Sand

    C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

    C781 Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components

    C784 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets

    C786/C786M Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods

    C831 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes?

    C888 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder

    C980 Standard Specification for Industrial Chimney Lining Brick

    C999 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides

    C1065 Standard Specification for Nuclear-Grade Zirconium Oxide Powder

    C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

    C1084 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

    C1093 Standard Practice for Accreditation of Testing Agencies for Masonry

    C1096/C1096M Standard Test Method for Determination of Wood Fiber in Asbestos Cement

    C1098 Standard Specification for Nuclear-Grade Hafnium Oxide Powder

    C1120/C1120M Standard Test Method for Wash Test of Asbestos

    C1121/C1121M Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos

    C1124/C1124M Standard Test Method for Kerosene Retention of Asbestos

    C1152/C1152M Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

    C1170/C1170M Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

    C1176/C1176M Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

    C1218/C1218M Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

    C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

    C1335 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation

    C1387 Standard Guide for the Determination of Technetium-99 in Soil

    C1436 Standard Specification for Materials for Shotcrete

    C1463 Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis

    C1524 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)

    C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

    C1746/C1746M Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices

    C1747/C1747M Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion

    C1761/C1761M Standard Specification for Lightweight Aggregate for Internal Curing of Concrete

    C1777 Standard Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter

    D50 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese

    D88 Standard Test Method for Saybolt Viscosity

    D113 Standard Test Method for Ductility of Bituminous Materials

    D126 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green

    D185 Standard Test Methods for Coarse Particles in Pigments

    D197 Standard Test Method for Sampling and Fineness Test of Pulverized Coal

    D244 Standard Test Methods and Practices for Emulsified Asphalts

    D269 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives

    D293 Standard Test Method for the Sieve Analysis of Coke

    D297 Standard Test Methods for Rubber Products—Chemical Analysis

    D345 Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications

    D409/D409M Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method

    D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants

    D422 Standard Test Method for Particle-Size Analysis of Soils

    D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils

    D440 Standard Test Method of Drop Shatter Test for Coal

    D441 Standard Test Method of Tumbler Test for Coal

    D444 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)

    D448 Standard Classification for Sizes of Aggregate for Road and Bridge Construction

    D451/D451M Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products

    D452/D452M Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products

    D480 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes

    D494 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

    D502 Standard Test Method for Particle Size of Soaps and Other Detergents

    D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

    D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

    D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D716 Standard Test Methods for Evaluating Mica Pigment

    D718 Standard Test Methods for Analysis of Aluminum Silicate Pigment

    D806 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures

    D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D934 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction

    D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

    D1118/D1118M Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles

    D1135 Standard Test Methods for Chemical Analysis of Blue Pigments

    D1139/D1139M Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments

    D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve

    D1155 Standard Test Method for Roundness of Glass Spheres

    D1214 Standard Test Method for Sieve Analysis of Glass Spheres

    D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D1278 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis

    D1283 Standard Test Method for Alkali-Solubility of Wools

    D1301 Standard Test Methods for Chemical Analysis of White Lead Pigments

    D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

    D1370/D1370M Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)

    D1413 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures

    D1508 Standard Test Method for Carbon Black, Pelleted Fines and Attrition

    D1511 Standard Test Method for Carbon Black—Pellet Size Distribution

    D1514 Standard Test Method for Carbon Black - Sieve Residue

    D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

    D1632 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory

    D1665 Standard Test Method for Engler Specific Viscosity of Tar Products

    D1739 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)

    D1742 Standard Test Method for Oil Separation from Lubricating Grease During Storage

    D1748 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

    D1863/D1863M Standard Specification for Mineral Aggregate Used on Built-Up Roofs

    D1865/D1865M Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs

    D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils

    D1914 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres

    D1921 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

    D1997 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass

    D2013/D2013M Standard Practice for Preparing Coal Samples for Analysis

    D2014 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven

    D2067 Standard Test Method for Coarse Particles in Printing Ink Dispersions

    D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors

    D2171/D2171M Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

    D2187 Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins

    D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

    D2320 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

    D2331 Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits

    D2332 Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence

    D2415 Standard Test Method for Ash in Coal Tar and Pitch

    D2416 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

    D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

    D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D2489/D2489M Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures

    D2589/D2589M Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber

    D2638 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

    D2752/D2752M Standard Test Methods for Air Permeability of Asbestos Fibers

    D2764 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

    D2774 Standard Practice for Underground Installation of Thermoplastic Pressure Piping

    D2784 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

    D2797/D2797M Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light

    D2844/D2844M Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils

    D2862 Standard Test Method for Particle Size Distribution of Granular Activated Carbon

    D2947/D2947M Standard Test Method for Screen Analysis of Asbestos Fibers

    D2978 Standard Test Method for Volume of Processed Peat Materials

    D2980 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials

    D3038 Standard Test Method for Drop Shatter Test for Coke

    D3042 Standard Test Method for Insoluble Residue in Carbonate Aggregates

    D3155 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures

    D3280 Standard Test Methods for Analysis of White Zinc Pigments

    D3313 Standard Test Method for Carbon Black—Individual Pellet Hardness

    D3402/D3402M Standard Test Method for Tumbler Test for Coke

    D3451 Standard Guide for Testing Coating Powders and Powder Coatings

    D3466 Standard Test Method for Ignition Temperature of Granular Activated Carbon

    D3639/D3639M Standard Test Method for Classification of Asbestos by Quebec Standard Test

    D3744/D3744M Standard Test Method for Aggregate Durability Index

    D3802 Standard Test Method for Ball-Pan Hardness of Activated Carbon

    D3880/D3880M Standard Test Method for Asbestos Strength Units

    D3977 Standard Test Methods for Determining Sediment Concentration in Water Samples

    D3997/D3997M Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light

    D4026 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene

    D4072 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

    D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

    D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

    D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

    D4292 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

    D4312 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

    D4315 Standard Test Methods for Rubber Compounding Material—Zinc Oxide

    D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

    D4326 Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence

    D4350 Standard Test Method for Corrosivity Index of Plastics and Fillers

    D4371 Standard Test Method for Determining the Washability Characteristics of Coal

    D4513 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving

    D4570 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)

    D4607 Standard Test Method for Determination of Iodine Number of Activated Carbon

    D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

    D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks

    D4715 Standard Test Method for Coking Value of Tar and Pitch (Alcan)

    D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

    D4749 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size

    D4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile

    D4791 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

    D4792/D4792M Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

    D4829 Standard Test Method for Expansion Index of Soils

    D4892 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

    D4894 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

    D4895 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

    D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

    D4930 Standard Test Method for Dust Control Material on Calcined Petroleum Coke

    D4931 Standard Test Method for Gross Moisture in Green Petroleum Coke

    D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method

    D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

    D5004 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

    D5030/D5030M Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

    D5080 Standard Test Method for Rapid Determination of Percent Compaction

    D5106 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

    D5148 Standard Test Method for Centrifuge Kerosine Equivalent

    D5158 Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving

    D5159 Standard Guide for Dusting Attrition of Granular Activated Carbon

    D5230 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness

    D5268 Standard Specification for Topsoil Used for Landscaping Purposes

    D5341 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)

    D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

    D5449/D5449M Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5493 Standard Test Method for Permittivity of Geotextiles Under Load

    D5514/D5514M Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics

    D5519 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials

    D5539 Standard Specification for Seed Starter Mix

    D5581 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

    D5600 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber

    D5644 Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber

    D5709 Standard Test Method for Sieve Analysis of Petroleum Coke

    D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

    D5883 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

    D6084/D6084M Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

    D6092 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control

    D6155 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

    D6276 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

    D6374 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

    D6376 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy

    D6390 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

    D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

    D6647 Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption

    D6791 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

    D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D6926 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus

    D6928 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D6933 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

    D6934 Standard Test Method for Residue by Evaporation of Emulsified Asphalt

    D6935 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

    D6936 Standard Test Method for Determining Demulsibility of Emulsified Asphalt

    D6997 Standard Test Method for Distillation of Emulsified Asphalt

    D6998 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

    D7226 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

    D7280 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

    D7367 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting

    D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

    D7428 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D7454 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus

    D7486 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

    D7496 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

    D7521 Standard Test Method for Determination of Asbestos in Soil

    D7655/D7655M Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems

    D7724 Standard Test Method for Carbon Black - Non-Dispersible Matter by Mechanical Flushing (NDM)

    E32 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition

    E102/E102M Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures

    E161 Standard Specification for Precision Electroformed Sieves

    E276 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials

    E323 Standard Specification for Perforated-Plate Sieves for Testing Purposes

    E359 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)

    E389 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials

    E688 Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing

    E726 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides

    E728 Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides

    E915 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement

    E956 Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)

    E1520 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations

    E1638 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media

    E1757 Standard Practice for Preparation of Biomass for Compositional Analysis

    E2016 Standard Specification for Industrial Woven Wire Cloth

    E2316 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides

    E2397 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems

    E2399 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems

    E2427 Standard Test Method for Acceptance by Performance Testing for Sieves

    E2542 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations

    E2543 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters

    E2651 Standard Guide for Powder Particle Size Analysis

    E2814 Standard Guide for Industrial Woven Wire Filter Cloth

    F104 Standard Classification System for Nonmetallic Gasket Materials

    F106 Standard Specification for Brazing Filler Metals for Electron Devices

    F608 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners

    F735 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method

    F1284 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems

    F1377 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)

    F1580 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants

    F1632 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes

    F1815 Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones

    F1864 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings

    F1877 Standard Practice for Characterization of Particles

    F1953 Standard Guide for Construction and Maintenance of Grass Tennis Courts

    F2075 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment

    F2107 Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields

    F2363/F2363M Standard Specification for Sewage and Graywater Flow Through Treatment Systems

    F2924 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion

    F2953 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages

    F3001 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion

    F3055 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion

    F3056 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion

    G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus

    G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C430 Test Method for Fineness of Hydraulic Cement by the 45-m (No. 325) Sieve

    E161 Specification for Precision Electroformed Sieves

    E323 Specification for Perforated-Plate Sieves for Testing Purposes

    E1638 Terminology Relating to Sieves, Sieving Methods, and Screening Media

    E2016 Specification for Industrial Woven Wire Cloth

    E2427 Test Method for Acceptance by Performance Testing for Sieves