ASTM E105 - 10 Standard Practice for Probability Sampling Of Materials


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    B579 Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)

    C50/C50M Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

    C92 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    C429 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture

    C655M Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

    C655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

    C708 Specification for Nuclear-Grade Beryllium Oxide Powder

    C750 Standard Specification for Nuclear-Grade Boron Carbide Powder

    C751 Standard Specification for Nuclear-Grade Boron Carbide Pellets

    C752 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy

    C753 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder

    C776 Standard Specification for Sintered Uranium Dioxide Pellets

    C784 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets

    C785 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets

    C802 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

    C823/C823M Standard Practice for Examination and Sampling of Hardened Concrete in Constructions

    C833 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets

    C888 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder

    C922 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets

    C985M Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)

    C985 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe

    C992 Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks

    C1031 Standard Specification for Nuclear-Grade Aluminum Oxide Powder

    C1065 Standard Specification for Nuclear-Grade Zirconium Oxide Powder

    C1066 Standard Specification for Nuclear Grade Zirconium Oxide Pellets

    C1076 Standard Specification for Nuclear Grade Hafnium Oxide Pellets

    C1098 Standard Specification for Nuclear-Grade Hafnium Oxide Powder

    C1314 Standard Test Method for Compressive Strength of Masonry Prisms

    C1334 Standard Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide

    C1765 Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    D75/D75M Standard Practice for Sampling Aggregates

    D245 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber

    D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures

    D1060 Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present

    D1596 Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material

    D1933 Standard Specification for Nitrogen Gas as an Electrical Insulating Material

    D1977 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis

    D2221 Standard Test Method for Creep Properties of Package Cushioning Materials

    D2229 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber

    D2555 Standard Practice for Establishing Clear Wood Strength Values

    D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

    D2661 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

    D2743 Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography

    D2915 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products

    D2940/D2940M Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

    D3123 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

    D3198 Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures

    D3283 Standard Specification for Air as an Electrical Insulating Material

    D3469 Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures

    D3472 Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures

    D3481 Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions

    D3633/D3633M Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems

    D3665 Standard Practice for Random Sampling of Construction Materials

    D3730 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings

    D3737 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

    D3907/D3907M Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

    D3968 Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures

    D4203 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

    D4463/D4463M Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts

    D4464 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering

    D4481 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts

    D4549 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

    D4673 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings

    D5154 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

    D5324 Standard Guide for Testing Water-Borne Architectural Coatings

    D5457 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design

    D5536 Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties

    D5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber

    D5644 Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber

    D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

    D6763 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents

    D6883 Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles

    D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

    D7026 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D7257 Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions

    D7390 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments

    D7430 Standard Practice for Mechanical Sampling of Coal

    D7707 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust

    E141 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling

    E566 Standard Practice for Electromagnetic (Eddy Current) Sorting of Ferrous Metals

    E688 Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing

    E703 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals

    E1004 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method

    E1367 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates

    E1402 Standard Guide for Sampling Design

    E1706 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates

    E1792 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

    E1908 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

    E2548 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis

    F355 Standard Test Method for Impact Attenuation of Playing Surface Systems and Materials

    F628 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

    F739 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact

    F766/F766M Standard Test Method for Melting Point of Waxes

    F778 Standard Methods for Gas Flow Resistance Testing of Filtration Media

    F903 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids

    F1015 Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces

    F1383 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact

    F1407 Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method

    F1499 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

    F1543 Standard Specification for Shock Attenuation Properties of Fencing Surfaces

    F1702 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus

    F1819 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique

    F1862/F1862M Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)

    F2130 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials

    F2232 Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E122 Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

    E141 Practice for Acceptance of Evidence Based on the Results of Probability Sampling

    E456 Terminology Relating to Quality and Statistics

    E1402 Guide for Sampling Design