ASTM E10 - 14 Standard Test Method for Brinell Hardness of Metallic Materials


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A1 Standard Specification for Carbon Steel Tee Rails

    A2 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

    A47/A47M Standard Specification for Ferritic Malleable Iron Castings

    A125 Standard Specification for Steel Springs, Helical, Heat-Treated

    A159 Standard Specification for Automotive Gray Iron Castings

    A220/A220M Standard Specification for Pearlitic Malleable Iron

    A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A476/A476M Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

    A532/A532M Standard Specification for Abrasion-Resistant Cast Irons

    A602 Standard Specification for Automotive Malleable Iron Castings

    A823 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings

    A833 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

    A834 Standard Specification for Common Requirements for Iron Castings for General Industrial Use

    A897/A897M Standard Specification for Austempered Ductile Iron Castings

    A909/A909M Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

    A942/A942M Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells

    A1038 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

    A1058 Standard Test Methods for Mechanical Testing of Steel Products—Metric

    B22/B22M Standard Specification for Bronze Castings for Bridges and Turntables

    B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

    B148 Standard Specification for Aluminum-Bronze Sand Castings

    B162 Standard Specification for Nickel Plate, Sheet, and Strip

    B168 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,

    B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

    B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

    B277 Standard Test Method for Hardness of Electrical Contact Materials

    B299 Standard Specification for Titanium Sponge

    B367 Standard Specification for Titanium and Titanium Alloy Castings

    B427 Standard Specification for Gear Bronze Alloy Castings

    B505/B505M Standard Specification for Copper Alloy Continuous Castings

    B546 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe

    B599 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip

    B647 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

    B648 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

    B688 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

    B718 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

    B719 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar

    B749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

    B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

    B763/B763M Standard Specification for Copper Alloy Sand Castings for Valve Applications

    B807/B807M Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys

    B846 Standard Terminology for Copper and Copper Alloys

    B894 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings

    B906 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

    B945 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers

    E103 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials

    E110 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers

    E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

    F138 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

    F139 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)

    F541 Standard Specification for Alloy Steel Eyebolts

    F561 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

    F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

    F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)

    F620 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition

    F621 Standard Specification for Stainless Steel Forgings for Surgical Implants

    F688 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)

    F765 Standard Specification for Wildcats, Ship Anchor Chain

    F961 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)

    F1106 Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

    F1314 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

    F1586 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)

    F1684 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications

    F2229 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)

    F2282 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

    F2581 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)

    F2924 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion

    F3055 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion

    F3056 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion

    G81 Standard Test Method for Jaw Crusher Gouging Abrasion Test


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E74 Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines

    E140 Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

    E384 Test Method for Knoop and Vickers Hardness of Materials