ASTM D907 - 12a Standard Terminology of Adhesives


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    C557 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

    D9 Standard Terminology Relating to Wood and Wood-Based Products

    D883 Standard Terminology Relating to Plastics

    D896 Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents

    D897 Standard Test Method for Tensile Properties of Adhesive Bonds

    D899 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive

    D903 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

    D904 Standard Practice for Exposure of Adhesive Specimens to Artificial Light

    D905 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

    D906 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading

    D950 Standard Test Method for Impact Strength of Adhesive Bonds

    D996 Standard Terminology of Packaging and Distribution Environments

    D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

    D1062 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds

    D1084 Standard Test Methods for Viscosity of Adhesives

    D1101 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use

    D1144 Standard Practice for Determining Strength Development of Adhesive Bonds

    D1146 Standard Test Method for Blocking Point of Potentially Adhesive Layers

    D1151 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds

    D1183 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions

    D1184 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies

    D1304 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation

    D1337 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength

    D1338 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength

    D1488 Standard Test Method for Amylaceous Matter in Adhesives

    D1489 Standard Test Method for Nonvolatile Content of Aqueous Adhesives

    D1490 Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions

    D1579 Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives

    D1582 Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives

    D1583 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films

    D1779 Standard Specification for Adhesive for Acoustical Materials

    D1780 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives

    D1781 Standard Test Method for Climbing Drum Peel for Adhesives

    D1828 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures

    D1874 Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases

    D1875 Standard Test Method for Density of Adhesives in Fluid Form

    D1876 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

    D1879 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation

    D1994 Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives

    D1995 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)

    D2093 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding

    D2094 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests

    D2095 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

    D2293 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)

    D2294 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)

    D2295 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)

    D2339 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading

    D2556 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry

    D2557 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F)

    D2559 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

    D2651 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding

    D2739 Standard Test Method for Volume Resistivity of Conductive Adhesives

    D2851 Standard Specification for Liquid Optical Adhesive

    D2918 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel

    D2919 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading

    D2979 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine

    D3111 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method

    D3121 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball

    D3163 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading

    D3164 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading

    D3165 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies

    D3166 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)

    D3167 Standard Test Method for Floating Roller Peel Resistance of Adhesives

    D3310 Standard Test Method for Determining Corrosivity of Adhesive Materials

    D3433 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints

    D3434 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

    D3482 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives

    D3498 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

    D3528 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading

    D3535 Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions

    D3632 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method

    D3658 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints

    D3762 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)

    D3807 Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)

    D3808 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion

    D3929 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method

    D3930 Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes

    D3933 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)

    D3983 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

    D4027 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test

    D4300 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi

    D4317 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives

    D4338 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend

    D4339 Standard Test Method for Determination of the Odor of Adhesives

    D4426 Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating

    D4497 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)

    D4498 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives

    D4499 Standard Test Method for Heat Stability of Hot-Melt Adhesives

    D4501 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

    D4502 Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints

    D4562 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen

    D4649 Standard Guide for Selection and Use of Stretch Wrap Films

    D4680 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)

    D4688 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber

    D4689 Standard Specification for Adhesive, Casein-Type

    D4690 Standard Specification for Urea-Formaldehyde Resin Adhesives

    D4783 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi

    D4800 Standard Guide for Classifying and Specifying Adhesives

    D4896 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results

    D5040 Standard Test Methods for Ash Content of Adhesives

    D5041 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints

    D5113 Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam

    D5215 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

    D5267 Standard Test Method for Determination of Extrudability of Cartridge Adhesives

    D5363 Standard Specification for Anaerobic Single-Component Adhesives (AN)

    D5405/D5405M Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

    D5572 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

    D5573 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints

    D5574 Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints

    D5648 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)

    D5649 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners

    D5656 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading

    D5657 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners

    D5747/D5747M Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

    D5751 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

    D5824 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

    D5868 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding

    D6004 Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives

    D6005 Standard Test Method for Determining Slump Resistance of Carpet Adhesives

    D6105 Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding

    D6195 Standard Test Methods for Loop Tack

    D6325 Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives

    D6383/D6383M Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

    D6396 Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees

    D6411/D6411M Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials

    D6412/D6412M Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials

    D6463/D6463M Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading

    D6464 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing

    D6465 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants

    D6862 Standard Test Method for 90 Degree Peel Resistance of Adhesives

    D7149 Standard Practice for Determining the Freeze Thaw Stability of Adhesives

    D7247 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures

    D7446 Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials

    D7532 Standard Practice for Determination of Re-tack Ability of Carpet Adhesives

    D7799 Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings

    D7888 Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings

    E631 Standard Terminology of Building Constructions

    E1605 Standard Terminology Relating to Lead in Buildings

    E1749 Standard Terminology Relating to Rigid Wall Relocatable Shelters

    E1773 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

    F412 Standard Terminology Relating to Plastic Piping Systems

    F782 Standard Specification for Doors, Furniture, Marine

    F822 Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine

    F823 Standard Specification for Desk, Log, Marine, Steel, with Cabinet

    F824 Standard Specification for Tables, Mess, Marine, Steel

    F825 Standard Specification for Drawers, Furniture, Marine, Steel

    F826 Standard Specification for Tops, Furniture, Marine, Steel

    F2255 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading

    F2256 Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading

    F2258 Standard Test Method for Strength Properties of Tissue Adhesives in Tension

    F2392 Standard Test Method for Burst Strength of Surgical Sealants

    F2458 Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants

    F2468 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications

    F2523 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D618 Practice for Conditioning Plastics for Testing

    D2507 Terminology of Rheological Properties of Gelled Rocket Propellants

    D2849 Methods of Testing Urethane Foam Polyol Raw Materials

    D2990 Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

    D3983 Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

    D4027 Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test

    D4317 Specification for Polyvinyl Acetate-Based Emulsion Adhesives

    D4499 Test Method for Heat Stability of Hot-Melt Adhesives

    D4680 Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)

    D5266 Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

    E6 Terminology Relating to Methods of Mechanical Testing