ASTM D76 / D76M - 11 Standard Specification for Tensile Testing Machines for Textiles


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

    C947 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)

    C1230 Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads

    D202 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation

    D204 Standard Test Methods for Sewing Threads

    D299/D299M Standard Specification for Asbestos Yarns

    D375/D375M Standard Specification for Asbestos Roving

    D628/D628M Standard Specification for Asbestos Tubular Sleeving

    D885/D885M Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers

    D1294 Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length

    D1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings

    D1578 Standard Test Method for Breaking Strength of Yarn in Skein Form

    D1683/D1683M Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics

    D1871 Standard Test Method for Adhesion Between Tire Bead Wire and Rubber

    D2061 Standard Test Methods for Strength Tests for Zippers

    D2229 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber

    D2256/D2256M Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method

    D2261 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)

    D2612 Standard Test Method for Fiber Cohesion in Sliver and Top (Static Tests)

    D2653 Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)

    D2724 Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics

    D2731 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)

    D2969 Standard Test Methods for Steel Tire Cords

    D2970/D2970M Standard Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments

    D3217/D3217M Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations

    D3787 Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test

    D3885 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)

    D3936 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering

    D4028/D4028M Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn

    D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles

    D4594 Standard Test Method for Effects of Temperature on Stability of Geotextiles

    D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method

    D4632/D4632M Standard Test Method for Grab Breaking Load and Elongation of Geotextiles

    D4776/D4776M Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure

    D4830/D4830M Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing

    D4833/D4833M Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products

    D4846 Standard Test Method for Resistance to Unsnapping of Snap Fasteners

    D4849 Standard Terminology Related to Yarns and Fibers

    D4884/D4884M Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles

    D4885 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method

    D4912/D4912M Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth

    D4964 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)

    D4975 Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel

    D5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

    D5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)

    D5169 Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners

    D5494 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes

    D5587 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure

    D6213 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids

    D6241 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe

    D6320/D6320M Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel

    D6496 Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners

    D6588/D6588M Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)

    D6636 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes

    D6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

    D6768 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners

    D6775 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material

    D6818 Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products

    D7003/D7003M Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes

    D7004/D7004M Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes

    D7005 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites

    D7142 Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners

    D7267 Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering

    D7269/D7269M Standard Test Methods for Tensile Testing of Aramid Yarns

    D7506/D7506M Standard Test Method for Pocket Reinforcement

    D7556 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests

    D7744/D7744M Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes

    D7747/D7747M Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method

    D7749 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method

    D7842/D7842M Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons

    E4 Standard Practices for Force Verification of Testing Machines

    E2098/E2098M Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution

    F1648 Standard Test Methods for Archery Bowstring Component—Serving String Material

    F1752 Standard Test Method for Archery Bow Component-Cord Material


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D123 Terminology Relating to Textiles

    D2256 Test Method for Tensile Properties of Yarns by the Single-Strand Method

    D4849 Terminology Related to Yarns and Fibers

    E4 Practices for Force Verification of Testing Machines

    E74 Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines