ASTM D653 - 11 Standard Terminology Relating to Soil, Rock, and Contained Fluids


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C1127 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface

    D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils

    D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

    D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D806 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures

    D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

    D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

    D1411 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes

    D1452 Standard Practice for Soil Exploration and Sampling by Auger Borings

    D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method

    D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

    D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils

    D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

    D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes

    D1632 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory

    D1633 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

    D1634 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)

    D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils

    D2113 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation

    D2166/D2166M Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

    D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

    D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors

    D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

    D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

    D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

    D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

    D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)

    D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil

    D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock

    D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

    D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

    D2973 Standard Test Method for Total Nitrogen in Peat Materials

    D2974 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils

    D2978 Standard Test Method for Volume of Processed Peat Materials

    D2980 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials

    D3155 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures

    D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil

    D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

    D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

    D3551 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer

    D3740 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

    D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe

    D3877 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures

    D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

    D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method

    D4016 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)

    D4043 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques

    D4044 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers

    D4050 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems

    D4083 Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)

    D4092 Standard Terminology for Plastics: Dynamic Mechanical Properties

    D4104 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)

    D4105 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method

    D4106 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method

    D4219 Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils

    D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

    D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

    D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

    D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

    D4320/D4320M Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters

    D4373 Standard Test Method for Rapid Determination of Carbonate Content of Soils

    D4380 Standard Test Method for Density of Bentonitic Slurries

    D4394 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method

    D4395 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method

    D4403 Standard Practice for Extensometers Used in Rock

    D4404 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry

    D4427 Standard Classification of Peat Samples by Laboratory Testing

    D4428/D4428M Standard Test Methods for Crosshole Seismic Testing

    D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place

    D4435 Standard Test Method for Rock Bolt Anchor Pull Test

    D4436 Standard Test Method for Rock Bolt Long-Term Load Retention Test

    D4452 Standard Practice for X-Ray Radiography of Soil Samples

    D4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity

    D4506 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test

    D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat

    D4520 Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods

    D4525 Standard Test Method for Permeability of Rocks by Flowing Air

    D4535 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer

    D4542 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer

    D4543 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances

    D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Soils

    D4553 Standard Test Method for Determining In Situ Creep Characteristics of Rock

    D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities

    D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test

    D4609 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization

    D4623 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge

    D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating

    D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks

    D4645 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method

    D4696 Standard Guide for Pore-Liquid Sampling from the Vadose Zone

    D4700 Standard Guide for Soil Sampling from the Vadose Zone

    D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils

    D4729 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method

    D4753 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing

    D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

    D4793 Standard Test Method for Sequential Batch Extraction of Waste with Water

    D4829 Standard Test Method for Expansion Index of Soils

    D4832 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders

    D4879 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock

    D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

    D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method

    D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

    D4945 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations

    D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating

    D4971 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack

    D4972 Standard Test Method for pH of Soils

    D4992 Standard Practice for Evaluation of Rock to be Used for Erosion Control

    D5030/D5030M Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

    D5079 Standard Practices for Preserving and Transporting Rock Core Samples

    D5080 Standard Test Method for Rapid Determination of Percent Compaction

    D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

    D5088 Standard Practice for Decontamination of Field Equipment Used at Waste Sites

    D5092 Standard Practice for Design and Installation of Groundwater Monitoring Wells

    D5093 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring

    D5101 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems

    D5102 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

    D5121 Standard Practice for Preparation of Rock Slabs for Durability Testing

    D5126/D5126M Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone

    D5141 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device

    D5143 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography

    D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

    D5202 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils

    D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

    D5233 Standard Test Method for Single Batch Extraction Method for Wastes

    D5239 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

    D5254/D5254M Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site

    D5268 Standard Specification for Topsoil Used for Landscaping Purposes

    D5269 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method

    D5270 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

    D5284 Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid

    D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

    D5313/D5313M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

    D5314 Standard Guide for Soil Gas Monitoring in the Vadose Zone

    D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure

    D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges

    D5408 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One - Additional Identification Descriptors

    D5409/D5409M Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two - Physical Descriptors

    D5410 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Three - Usage Descriptors

    D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

    D5435 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection

    D5447 Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem

    D5473 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer

    D5474 Standard Guide for Selection of Data Elements for Groundwater Investigations

    D5490 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information

    D5493 Standard Test Method for Permittivity of Geotextiles Under Load

    D5519 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials

    D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression

    D5539 Standard Specification for Seed Starter Mix

    D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer

    D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

    D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

    D5608 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites

    D5609 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling

    D5610 Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling

    D5611 Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application

    D5715 Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)

    D5716 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir

    D5718 Standard Guide for Documenting a Groundwater Flow Model Application

    D5719 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes

    D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

    D5737 Standard Guide for Methods for Measuring Well Discharge

    D5738 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams for Single Analyses

    D5744 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell

    D5753 Standard Guide for Planning and Conducting Borehole Geophysical Logging

    D5754 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Trilinear Diagrams for Two or More Analyses

    D5777 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation

    D5778 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils

    D5780 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load

    D5782 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5783 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5785 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)

    D5786 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

    D5850 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells

    D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method

    D5855 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well

    D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter

    D5858 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

    D5873 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method

    D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil

    D5876 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes

    D5880 Standard Guide for Subsurface Flow and Transport Modeling

    D5881 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)

    D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

    D5883 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

    D5887 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

    D5911/D5911M Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site

    D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

    D5921 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems

    D5922 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations

    D5923 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations

    D5924 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations

    D5978 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells

    D5979 Standard Guide for Conceptualization and Characterization of Groundwater Systems

    D5980 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring

    D5981 Standard Guide for Calibrating a Groundwater Flow Model Application

    D5982 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)

    D5995 Standard Guide for Environmental Site Characterization in Cold Regions

    D6000 Standard Guide for Presentation of Water-Level Information from Groundwater Sites

    D6001 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization

    D6023 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)

    D6024 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application

    D6025 Standard Guide for Developing and Evaluating Groundwater Modeling Codes

    D6026 Standard Practice for Using Significant Digits in Geotechnical Data

    D6028 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method

    D6029 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method

    D6030 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability

    D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core

    D6033 Standard Guide for Describing the Functionality of a Groundwater Modeling Code

    D6034 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test

    D6036 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Use of Maps

    D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

    D6067 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization

    D6088 Standard Practice for Installation of Geocomposite Pavement Drains

    D6092 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control

    D6102 Standard Guide for Installation of Geosynthetic Clay Liners

    D6106 Standard Guide for Establishing Nomenclature of Groundwater Aquifers

    D6128 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell

    D6141 Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids

    D6146 Standard Guide for Monitoring Aqueous Nutrients in Watersheds

    D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling

    D6167 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper

    D6168 Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids

    D6170 Standard Guide for Selecting a Groundwater Modeling Code

    D6171 Standard Guide for Documenting a Groundwater Modeling Code

    D6187 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence

    D6230 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers

    D6234 Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure

    D6235 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites

    D6236 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil

    D6274 Standard Guide for Conducting Borehole Geophysical Logging - Gamma

    D6276 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

    D6286 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization

    D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration

    D6393 Standard Test Method for Bulk Solids Characterization by Carr Indices

    D6429 Standard Guide for Selecting Surface Geophysical Methods

    D6430 Standard Guide for Using the Gravity Method for Subsurface Investigation

    D6431 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation

    D6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

    D6452 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations

    D6459 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion

    D6461 Standard Specification for Silt Fence Materials

    D6462 Standard Practice for Silt Fence Installation

    D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils

    D6473 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control

    D6475 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets

    D6517 Standard Guide for Field Preservation of Groundwater Samples

    D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation

    D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils

    D6539 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air

    D6564 Standard Guide for Field Filtration of Groundwater Samples

    D6565 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method

    D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

    D6598 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations

    D6629 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion

    D6635 Standard Test Method for Performing the Flat Plate Dilatometer

    D6639 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations

    D6640 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations

    D6642 Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux

    D6682 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester

    D6683 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

    D6706 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil

    D6724 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells

    D6726 Standard Guide for Conducting Borehole Geophysical Logging - Electromagnetic Induction

    D6727 Standard Guide for Conducting Borehole Geophysical Logging - Neutron

    D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

    D6766 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions

    D6773 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester

    D6820 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation

    D6825 Standard Guide for Placement of Riprap Revetments

    D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge

    D6910/D6910M Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

    D6911 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis

    D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

    D6940 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

    D6941 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders

    D7012 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

    D7013/D7013M Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges

    D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils

    D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration

    D7069 Standard Guide for Field Quality Assurance in a Groundwater Sampling Event

    D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature

    D7099 Standard Terminology Relating to Frozen Soil and Rock

    D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

    D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions

    D7128 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation

    D7181 Method for Consolidated Drained Triaxial Compression Test for Soils

    D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

    D7262 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids

    D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

    D7272 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods

    D7276 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow

    D7277 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow

    D7299 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe

    D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain

    D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions

    D7338 Standard Guide for Assessment Of Fungal Growth in Buildings

    D7351 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications

    D7352 Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)

    D7367 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting

    D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer

    D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

    D7383 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations

    D7400 Standard Test Methods for Downhole Seismic Testing

    D7401 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests

    D7458 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection

    D7481 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder

    D7499/D7499M Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness

    D7503 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils

    D7608 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces

    D7625 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method

    D7626 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay

    D7663 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

    D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

    D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

    D7699/D7699M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites

    D7701 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag

    E850 Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill

    E1676 Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida and the Enchytraeid Potworm Enchytraeus albidus

    E2060 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes

    E2277 Standard Guide for Design and Construction of Coal Ash Structural Fills

    E2278 Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage

    E2531 Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface

    E2787 Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    E2838 Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    F480 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80

    F1668 Standard Guide for Construction Procedures for Buried Plastic Pipe

    F1759 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

    F1953 Standard Guide for Construction and Maintenance of Grass Tennis Courts

    F2107 Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields

    F2536 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs

    F2747 Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C150 Specification for Portland Cement

    C802 Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

    D558 Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

    D698 Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D854 Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D1557 Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

    D2435 Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

    D2487 Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D4043 Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques

    D4044 Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers

    D4050 Test Method for (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems

    D4104 Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)

    D4105 Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method

    D4106 Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method

    D4186 Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading

    D4253 Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

    D4254 Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

    D4318 Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

    D4750 Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)

    D4943 Test Method for Shrinkage Factors of Soils by the Wax Method

    D5084 Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

    D5088 Practice for Decontamination of Field Equipment Used at Waste Sites

    D5092 Practice for Design and Installation of Ground Water Monitoring Wells

    D5269 Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method

    D5270 Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

    D5878 Guides for Using Rock-Mass Classification Systems for Engineering Purposes

    D6026 Practice for Using Significant Digits in Geotechnical Data

    D6028 Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method

    D6029 Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method

    D6312 Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs

    D6910/D6910M Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

    D6913 Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D7099 Terminology Relating to Frozen Soil and Rock

    D7382 Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method