A974 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

A978/A978M Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications

C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete

C582 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

C647 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation

C722 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

C881/C881M Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems

C1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate

C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

C1594 Standard Specification for Polyimide Rigid Cellular Thermal Insulation

D116 Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications

D229 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation

D695 Standard Test Method for Compressive Properties of Rigid Plastics

D706 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds

D707 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds

D787 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

D883 Standard Terminology Relating to Plastics

D1039 Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation

D1043 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

D1248 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

D1562 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds

D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

D1708 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

D1710 Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

D1784 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

D1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

D2105 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

D2116 Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials

D2122 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

D2239 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

D2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

D2294 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)

D2295 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)

D2513 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

D2609 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

D2633 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

D2647 Standard Specification for Crosslinkable Ethylene Plastics

D2737 Standard Specification for Polyethylene (PE) Plastic Tubing

D2852 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings

D2902 Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation

D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

D2996 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D3013 Standard Specification for Epoxy Molding Compounds

D3032 Standard Test Methods for Hookup Wire Insulation

D3159 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials

D3222 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

D3275 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials

D3294 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes

D3295 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing

D3307 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials

D3308 Standard Specification for PTFE Resin Skived Tape

D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

D3368 Standard Specification for FEP-Fluorocarbon Resin Sheet and Film

D3517 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

D3641 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

D3748 Standard Practice for Evaluating High-Density Rigid Cellular Plastics

D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

D3826 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

D3840 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

D3841 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

D3915 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications

D3916 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

D3929 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method

D3935 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material

D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

D4000 Standard Classification System for Specifying Plastic Materials

D4020 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

D4067 Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

D4093 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

D4097 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

D4203 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

D4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

D4349 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

D4396 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications

D4434/D4434M Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

D4549 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

D4565 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

D4634 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

D4673 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

D4762 Standard Guide for Testing Polymer Matrix Composite Materials

D4801 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater

D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

D4894 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

D4895 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

D4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

D5045 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

D5083 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

D5138 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

D5203 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources

D5205 Standard Classification System for Polyetherimide (PEI) Materials

D5224 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

D5323 Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes

D5336 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials

D5364 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units

D5397 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test

D5436 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

D5575 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

D5592 Standard Guide for Material Properties Needed in Engineering Design Using Plastics

D5721 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes

D5813 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

D5947 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

D5948 Standard Specification for Molding Compounds, Thermosetting

D5977 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

D5989 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)

D6041 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

D6098 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

D6100 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)

D6261 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

D6263 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

D6272 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

D6324 Standard Test Methods for Male Condoms Made from Polyurethane

D6338 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods

D6339 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

D6392 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods

D6394 Standard Specification for Sulfone Plastics (SP)

D6456 Standard Specification for Finished Parts Made from Polyimide Resin

D6457 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)

D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

D6713 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

D7027 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine

D7056 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams

D7082 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

D7194 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)

D7272 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods

D7275 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)

D7292 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

D7293 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

D7408 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams

D7471 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials

D7472 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials

D7745 Standard Practice for Testing Pultruded Composites

E2254 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers

E2634 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

E2639 Standard Test Method for Blast Resistance of Trash Receptacles

E2740 Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing

E2831/E2831M Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places

F381 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines

F412 Standard Terminology Relating to Plastic Piping Systems

F450 Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic)

F451 Standard Specification for Acrylic Bone Cement

F480 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80

F561 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

F602 Standard Criteria for Implantable Thermoset Epoxy Plastics

F639 Standard Specification for Polyethylene Plastics for Medical Applications

F641 Standard Specification for Implantable Epoxy Electronic Encapsulants

F648 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants

F702 Standard Specification for Polysulfone Resin for Medical Applications

F711 Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools

F755 Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants

F790 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

F852 Standard Specification for Portable Gasoline Containers for Consumer Use

F976 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use

F997 Standard Specification for Polycarbonate Resin for Medical Applications

F1055 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing

F1092 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

F1216 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

F1306 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

F1309 Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

F1533 Standard Specification for Deformed Polyethylene (PE) Liner

F1561 Standard Performance Requirements for Plastic Chairs for Outdoor Use

F1563 Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing

F1588 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)

F1606 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner

F1635 Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

F1717 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

F1743 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

F1804 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation

F1838 Standard Performance Requirements for Child's Plastic Chairs for Outdoor Use

F1858 Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use

F1867 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation

F1871 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation

F1924 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

F1948 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing

F1973 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems

F1988 Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use

F2019 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)

F2026 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications

F2097 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products

F2145 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing

F2150 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products

F2160 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)

F2176 Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct

F2331 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials

F2376 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems

F2418 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers

F2509 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

F2562/F2562M Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage

F2565 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications

F2600 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing

F2619/F2619M Standard Specification for High-Density Polyethylene (PE) Line Pipe

F2634 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

F2718 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines

F2720/F2720M Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe

F2736 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe

F2759 Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices

F2764 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

F2767 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution

F2785 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings

F2790 Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses

F2817 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair

F2818 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing

F2881 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

F2896 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids

F2921 Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi

G114 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service

G178 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique