ASTM D6300 - 13a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D56 Standard Test Method for Flash Point by Tag Closed Cup Tester

    D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    D97 Standard Test Method for Pour Point of Petroleum Products

    D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

    D1218 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids

    D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D2068 Standard Test Method for Determining Filter Blocking Tendency

    D2266 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

    D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

    D2892 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

    D3143/D3143M Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

    D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

    D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

    D4683 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150?°C

    D4741 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

    D5481 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

    D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

    D6378 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

    D6450 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

    D6708 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

    D6792 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories

    D6822 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

    D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

    D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

    D7039 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

    D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

    D7060 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

    D7096 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography

    D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method

    D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

    D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

    D7236 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

    D7344 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)

    D7345 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method

    D7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products

    D7373 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model

    D7416 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome

    D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

    D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

    D7619 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

    D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

    D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction

    D7622 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

    D7623 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

    D7668 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method

    D7687 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration

    D7751 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

    D7756 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection

    D7757 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7778 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    D7795 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

    D7797 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy – Rapid Screening Method

    D7807 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection

    D7847 Standard Guide for Interlaboratory Studies for Microbiological Test Methods

    E1655 Standard Practices for Infrared Multivariate Quantitative Analysis

    E2056 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D123 Terminology Relating to Textiles

    D3244 Practice for Utilization of Test Data to Determine Conformance with Specifications

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E456 Terminology Relating to Quality and Statistics

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method