ASTM D5681 - 13 Standard Terminology for Waste and Waste Management


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D3987 Standard Practice for Shake Extraction of Solid Waste with Water

    D4979 Standard Test Method for Physical Description Screening Analysis in Waste

    D4981 Standard Test Method for Screening of Oxidizers in Waste

    D5057 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste

    D5058 Standard Practices for Compatibility of Screening Analysis of Waste

    D5232 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material

    D5368 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples

    D5658 Standard Practice for Sampling Unconsolidated Waste From Trucks

    D5759 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

    D5792 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives

    D6009 Standard Guide for Sampling Waste Piles

    D6010 Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices

    D6323 Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities

    D6538 Standard Guide for Sampling Wastewater With Automatic Samplers

    D6597 Standard Practice for Assessment of Attaining Clean Up Level for Site Closure

    D6661 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling

    D6699 Standard Practice for Sampling Liquids Using Bailers

    D6759 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers

    D6907 Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers

    D6956 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use

    D7203 Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor

    D7204 Standard Practice for Sampling Waste Streams on Conveyors

    D7353 Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump

    D7831 Standard Practice for Sampling of Tanks by Field Personnel

    D7858 Standard Test Method for Determination of Bisphenol A in Soil, Sludge and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry

    E775 Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel

    E777 Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel

    E778 Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel

    E790 Standard Test Method for Residual Moisture in a Refuse-Derived Fuel Analysis Sample

    E953/E953M Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash

    E1266 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D1129 Terminology Relating to Water

    D4439 Terminology for Geosynthetics

    D4448 Guide for Sampling Ground-Water Monitoring Wells

    D4547 Guide for Sampling Waste and Soils for Volatile Organic Compounds

    D4646 Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments

    D4790 Terminology of Aromatic Hydrocarbons and Related Chemicals

    D4874 Test Method for Leaching Solid Material in a Column Apparatus

    D5120 Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process

    D5231 Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste

    D5285 Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments

    D5368 Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples

    D5369 Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction

    D5468 Test Method for Gross Calorific and Ash Value of Waste Materials

    D5660 Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium

    D5679 Practice for Sampling Consolidated Solids in Drums or Similar Containers

    D5680 Practice for Sampling Unconsolidated Solids in Drums or Similar Containers

    D5743 Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers

    D5744 Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell

    D5745 Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation

    D5746 Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities

    D5759 Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

    D5792 Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives

    D5956 Guide for Sampling Strategies for Heterogeneous Wastes

    D6008 Practice for Conducting Environmental Baseline Surveys

    D6044 Guide for Representative Sampling for Management of Waste and Contaminated Media

    D6051 Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities

    D6063 Guide for Sampling of Drums and Similar Containers by Field Personnel

    D6250 Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions

    D6270 Practice for Use of Scrap Tires in Civil Engineering Applications

    D6311 Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design

    D6323 Guide for Laboratory Subsampling of Media Related to Waste Management Activities

    D6346 Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs

    D6538 Guide for Sampling Wastewater With Automatic Samplers

    D6582 Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling

    D6661 Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling

    D6700 Practice for Use of Scrap Tire-Derived Fuel

    D6759 Practice for Sampling Liquids Using Grab and Discrete Depth Samplers

    D6842 Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making

    D6956 Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use

    D6982 Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns

    E135 Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials

    E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods

    E456 Terminology Relating to Quality and Statistics

    E702 Specification for Municipal Ferrous Scrap

    E708 Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers

    E711 Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter

    E828 Test Method for Designating the Size of RDF-3 From its Sieve Analysis

    E850 Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill

    E856 Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel

    E868 Test Methods for Conducting Performance Tests on Mechanical Conveying Equipment Used in Resource Recovery Systems

    E884 Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities

    E889 Test Method for Composition or Purity of a Solid Waste Materials Stream

    E897 Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel

    E929 Test Method for Measuring Electrical Energy Requirements of Processing Equipment

    E943 Terminology Relating to Biological Effects and Environmental Fate

    E949 Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample

    E953 Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash

    E959 Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment

    E1037 Test Method for Measuring Particle Size Distribution of RDF-5

    E1138 Terminology for Technical Aspects of Products Liability Litigation

    E1183 Test Method for Air Drying RDF-5 for Further Analysis

    E1248 Practice for Shredder Explosion Protection

    E1266 Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications