C461 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation

C647 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation

D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

D115 Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation

D154 Standard Guide for Testing Varnishes

D235 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

D268 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

D333 Standard Guide for Clear and Pigmented Lacquers

D396 Standard Specification for Fuel Oils

D975 Standard Specification for Diesel Fuel Oils

D1655 Standard Specification for Aviation Turbine Fuels

D2627 Standard Specification for Diacetone Alcohol

D2880 Standard Specification for Gas Turbine Fuel Oils

D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

D3288/D3288M Standard Test Methods for Magnet-Wire Enamels

D3437 Standard Practice for Sampling and Handling Liquid Cyclic Products

D3699 Standard Specification for Kerosine

D3734 Standard Specification for High-Flash Aromatic Naphthas

D3735 Standard Specification for VMP Naphthas

D3757 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes

D3934 Standard Test Method for Flash/No Flash Test-Equilibrium Method by a Closed-Cup Apparatus

D3941 Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus

D4054 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

D4171 Standard Specification for Fuel System Icing Inhibitors

D4712 Standard Guide for Testing Industrial Water-Reducible Coatings

D4865 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings

D5363 Standard Specification for Anaerobic Single-Component Adhesives (AN)

D5452 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

D5557 Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds

D5958 Standard Practices for Preparation of Oil-Based Ink Resin Solutions

D6038 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)

D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

D6465 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants

D6468 Standard Test Method for High Temperature Stability of Middle Distillate Fuels

D6577 Standard Guide for Testing Industrial Protective Coatings

D6763 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents

D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

D7215 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels

D7223 Standard Specification for Aviation Certification Turbine Fuel

D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

E502 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods

F718 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet