ASTM D5504 - 12 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D1835 Standard Specification for Liquefied Petroleum (LP) Gases

    D5287 Standard Practice for Automatic Sampling of Gaseous Fuels

    D6021 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

    D6228 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

    D6968 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

    D7165 Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels

    D7166 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels

    D7493 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection

    D7551 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence

    D7652 Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection

    D7663 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

    D7800/D7800M Standard Test Method for Determination of Elemental Sulfur in Natural Gas

    D7807 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D1072 Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration

    D1945 Test Method for Analysis of Natural Gas by Gas Chromatography

    D3609 Practice for Calibration Techniques Using Permeation Tubes

    D4468 Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry

    E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods

    E594 Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method