ASTM D4354 - 12 Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for TestingCiting ASTM Standards
Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.
D1987 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles D4594 Standard Test Method for Effects of Temperature on Stability of Geotextiles D4716 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head D4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile D4759 Standard Practice for Determining the Specification Conformance of Geosynthetics D4830 Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing D4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples D4885 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method D4886 Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method) D5101 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems D5141 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics D5261 Standard Test Method for Measuring Mass per Unit Area of Geotextiles D5262 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics D5321 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear D5397 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test D5493 Standard Test Method for Permittivity of Geotextiles Under Load D5494 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems D5884 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes D5993 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners D5994 Standard Test Method for Measuring Core Thickness of Textured Geomembrane D6072/D6072M Standard Practice for Obtaining Samples of Geosynthetic Clay Liners D6241 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe D6244 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains D6364 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics D6454 Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs) D6455 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM) D6461 Standard Specification for Silt Fence Materials D6475 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets D6524 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs) D6525 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products D6566 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats D6567 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM) D6574 Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow D6575 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs) D6636 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes D6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method D6638 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks) D6685 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC) D6706 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil D6767 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test D6916 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks) D6918 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition D7001 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications D7005 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites D7179 Standard Test Method for Determining Geonet Breaking Force D7207 Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications D7274 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM) D7275 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM) D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions D7498 Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test D7499/D7499M Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness D7556 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests D7701 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag D7737 Standard Test Method for Individual Geogrid Junction Strength Referenced ASTM Standards
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
| ||