ASTM D4220 - 95(2007) Standard Practices for Preserving and Transporting Soil SamplesCiting ASTM Standards
Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.
D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils D3999 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for Saturated D4700 Standard Guide for Soil Sampling from the Vadose Zone D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils D4823 Standard Guide for Core Sampling Submerged, Unconsolidated Sediments D5079 Standard Practices for Preserving and Transporting Rock Core Samples D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter D5092 Standard Practice for Design and Installation of Groundwater Monitoring Wells D5101 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil D5314 Standard Guide for Soil Gas Monitoring in the Vadose Zone D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems D5730 Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method D6035 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter D6072/D6072M Standard Practice for Obtaining Samples of Geosynthetic Clay Liners D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling D6168 Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids D6169 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations D6236 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil D6282 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils D6539 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method D6911 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions D7181 Method for Consolidated Drained Triaxial Compression Test for Soils D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer F1962 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings Referenced ASTM Standards
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
| ||