Standards

ASTM D4177 - 95(2010) Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

D88 Standard Test Method for Saybolt Viscosity

D91 Standard Test Method for Precipitation Number of Lubricating Oils

D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

D94 Standard Test Methods for Saponification Number of Petroleum Products

D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

D187 Standard Test Method for Burning Quality of Kerosine

D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products

D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

D396 Standard Specification for Fuel Oils

D473 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

D482 Standard Test Method for Ash from Petroleum Products

D483 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

D613 Standard Test Method for Cetane Number of Diesel Fuel Oil

D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

D893 Standard Test Method for Insolubles in Used Lubricating Oils

D910 Standard Specification for Aviation Gasolines

D975 Standard Specification for Diesel Fuel Oils

D1018 Standard Test Method for Hydrogen In Petroleum Fractions

D1091 Standard Test Methods for Phosphorus in Lubricating Oils and Additives

D1093 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

D1298 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

D1318 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

D2068 Standard Test Method for Determining Filter Blocking Tendency

D2273 Standard Test Method for Trace Sediment in Lubricating Oils

D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

D2386 Standard Test Method for Freezing Point of Aviation Fuels

D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

D2892 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

D3143 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

D3711 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors

D3764 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

D4006 Standard Test Method for Water in Crude Oil by Distillation

D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

D4052 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

D4055 Standard Test Method for Pentane Insolubles by Membrane Filtration

D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

D4377 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration

D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)

D4539 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

D4625 Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)

D4735 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography

D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D4807 Standard Test Method for Sediment in Crude Oil by Membrane Filtration

D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

D4870 Standard Test Method for Determination of Total Sediment in Residual Fuels

D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

D4929 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

D5002 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

D5184 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

D5236 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

D5291 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

D5304 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

D5439 Standard Test Method for Determination of Sediment in Moellon

D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

D5761 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

D5762 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)

D5772 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)

D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines

D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

D5842 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

D5853 Standard Test Method for Pour Point of Crude Oils

D5854 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

D5863 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

D5949 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

D5985 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

D6078 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

D6122 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

D6277 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

D6334 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

D6377 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

D6378 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

D6379 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

D6443 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

D6450 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

D6470 Standard Test Method for Salt in Crude Oils (Potentiometric Method)

D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

D6591 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

D6621 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials

D6624 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

D6730 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

D6748 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

D6749 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

D6756 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

D6793 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

D6822 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

D6892 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

D6898 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

D6920 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

D7039 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection

D7058 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

D7060 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

D7061 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

D7094 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

D7112 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

D7153 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

D7154 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method

D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

D7214 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

D7235 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices

D7236 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

D7261 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography

D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

D7344 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)

D7345 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method

D7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products

D7371 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)

D7397 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)

D7416 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome

D7419 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection

D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels

D7455 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

D7462 Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)

D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

D7524 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method

D7525 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

D7545 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)

D7547 Standard Specification for Hydrocarbon Only Unleaded Aviation Gasoline

D7551 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence

D7579 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol

D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel

D7596 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester

D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

D7619 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

D7622 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

D7623 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

D7647 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction

D7662 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils

D7667 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method

D7668 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method

D7669 Standard Guide for Practical Lubricant Condition Data Trend Analysis

D7671 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

D7679 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils

D7683 Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)

D7688 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation

D7689 Standard Test Method for Cloud Point of Petroleum Products (Mini Method)

D7691 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7719 Standard Specification for High Octane Unleaded Test Fuel

D7740 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

D7751 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

D7827 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device

E1655 Standard Practices for Infrared Multivariate Quantitative Analysis

Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.