ASTM D4175 - 09ae3 Standard Terminology Relating to Petroleum, Petroleum Products, and LubricantsCiting ASTM Standards
Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.
D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products D613 Standard Test Method for Cetane Number of Diesel Fuel Oil D909 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration D1403 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment D1404/D1404M Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease D1831 Standard Test Method for Roll Stability of Lubricating Grease D2511 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants D2649 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel D2782 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method) D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease D4055 Standard Test Method for Pentane Insolubles by Membrane Filtration D4289 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids D4693 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel D4950 Standard Classification and Specification of Automotive Service Greases D4953 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids D5482 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric) D5599 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection D5706 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine D5707 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine D6074 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils D6185 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases D6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils D6557 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils D6593 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions D6618 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine) D6731 Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer D6743 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils D6837 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure D6974 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine D7112 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection) D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils ( D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers D7217 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method) D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine D7420 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine D7421 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine D7423 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection D7463 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures and Fuel Associated Water D7468 Standard Test Method for Cummins ISM Test D7482 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine D7528 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus D7546 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor D7549 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure D7563 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel D7579 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol D7589 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine D7594 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine D7596 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester D7603 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection D7622 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction D7623 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method D7668 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method D7684 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants D7687 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration D7690 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography D7721 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency D7755 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine F2489 Standard Guide for Instrument and Precision Bearing Lubricants-Part 2 Greases Referenced ASTM Standards
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
There are currently no reference documents for this standard.
| ||