ASTM D412 - 06a(2013) Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A975 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    C425 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

    C505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints

    C505M Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)

    C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C542 Standard Specification for Lock-Strip Gaskets

    C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

    C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

    C877M Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)

    C877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections

    C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)

    C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals

    C957/C957M Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface

    C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

    C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems

    C1187 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks

    C1193 Standard Guide for Use of Joint Sealants

    C1208/C1208M Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels

    C1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

    C1478M Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)

    C1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals

    C1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures

    C1644 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

    D69 Standard Test Methods for Friction Tapes

    D120 Standard Specification for Rubber Insulating Gloves

    D178 Standard Specification for Rubber Insulating Matting

    D378 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type

    D380 Standard Test Methods for Rubber Hose

    D429 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates

    D430 Standard Test Methods for Rubber Deterioration—Dynamic Fatigue

    D454 Standard Test Method for Rubber Deterioration by Heat and Air Pressure

    D470 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable

    D471 Standard Test Method for Rubber Property—Effect of Liquids

    D572 Standard Test Method for Rubber-Deterioration by Heat and Oxygen

    D573 Standard Test Method for Rubber—Deterioration in an Air Oven

    D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

    D638 Standard Test Method for Tensile Properties of Plastics

    D750 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus

    D865 Standard Test Method for Rubber - Deterioration by Heating in Air (Test Tube Enclosure)

    D876 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

    D1048 Standard Specification for Rubber Insulating Blankets

    D1049 Standard Specification for Rubber Insulating Covers

    D1050 Standard Specification for Rubber Insulating Line Hose

    D1051 Standard Specification for Rubber Insulating Sleeves

    D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

    D1330 Standard Specification for Rubber Sheet Gaskets

    D1414 Standard Test Methods for Rubber O-Rings

    D1566 Standard Terminology Relating to Rubber

    D1869 Standard Specification for Rubber Rings for Asbestos-Cement Pipe

    D2000 Standard Classification System for Rubber Products in Automotive Applications

    D2523 Standard Practice for Testing Load-Strain Properties of Roofing Membranes

    D2527 Standard Specification for Rubber Seals—Splice Strength

    D2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

    D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

    D2903 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation

    D3032 Standard Test Methods for Hookup Wire Insulation

    D3137 Standard Test Method for Rubber Property—Hydrolytic Stability

    D3184 Standard Practice for Rubber - Evaluation of NR (Natural Rubber)

    D3185 Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil

    D3186 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil

    D3187 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)

    D3188 Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)

    D3189 Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)

    D3190 Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR)

    D3191 Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures

    D3192 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)

    D3403 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)

    D3468/D3468M Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

    D3484 Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)

    D3489 Standard Test Methods for Microcellular Urethane Materials

    D3492 Standard Specification for Rubber Contraceptives (Male Condoms)

    D3542 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

    D3568 Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil

    D3574 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

    D3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

    D3577 Standard Specification for Rubber Surgical Gloves

    D3578 Standard Specification for Rubber Examination Gloves

    D3579 Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type

    D3667 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

    D3771 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors

    D3772 Standard Specification for Natural Rubber Finger Cots

    D3832 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems

    D3848 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black

    D3851 Standard Specification for Urethane Microcellular Shoe Soling Materials

    D3903 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems

    D3958 Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)

    D4000 Standard Classification System for Specifying Plastic Materials

    D4014 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

    D4054 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

    D4068 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

    D4122 Standard Practice for Carbon Black-Evaluation of an Industry Reference Black

    D4289 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

    D4316 Standard Specification for Elastomeric Water Bottles

    D4325 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

    D4485 Standard Specification for Performance of Active API Service Category Engine Oils

    D4551 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

    D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

    D4679 Standard Specification for Rubber General Purpose, Household or Beautician Gloves

    D4811/D4811M Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

    D4819 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics

    D5250 Standard Specification for Poly(vinyl chloride) Gloves for Medical Application

    D5662 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

    D5747/D5747M Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

    D5817 Standard Practice for Carbon Black, Pelleted - Reduction, Blending, and Drying of Gross Samples for Testing

    D5893/D5893M Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

    D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

    D5964 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils

    D5973 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

    D6134 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems

    D6152/D6152M Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing

    D6319 Standard Specification for Nitrile Examination Gloves for Medical Application

    D6324 Standard Test Methods for Male Condoms Made from Polyurethane

    D6338 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods

    D6343 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications

    D6411/D6411M Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials

    D6515 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending

    D6546 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

    D6746 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds

    D6909 Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer

    D6924 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

    D6947/D6947M Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System

    D6976 Standard Specification for Rubber Contraceptives—Vaginal Diaphragms

    D6977 Standard Specification for Polychloroprene Examination Gloves for Medical Application

    D7103 Standard Guide for Assessment of Medical Gloves

    D7160 Standard Practice for Determination of Expiration Dating for Medical Gloves

    D7161 Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions

    D7198 Standard Specification for Disposable Embalming Gloves for Single-Use Applications

    D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

    D7329 Standard Specification for Food Preparation and Food Handling (Food Service) Gloves

    D7465 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications

    D7826 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives

    E501 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

    E524 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

    E670 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter

    E1068 Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid

    E1136 Standard Specification for P195/75R14 Radial Standard Reference Test Tire

    E1551 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment

    E1612/E1612M Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures

    E1783/E1783M Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures

    E1844 Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire

    E2203 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

    E2731 Standard Specification for Materials to Mitigate the Spread of Radioactive Contamination after a Radiological Dispersion Event

    E2785 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions

    F146 Standard Test Methods for Fluid Resistance of Gasket Materials

    F152 Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials

    F477 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

    F561 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

    F624 Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications

    F703 Standard Specification for Implantable Breast Prostheses

    F790 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

    F881 Standard Specification for Silicone Elastomer Facial Implants

    F913 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe

    F942 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures

    F1081 Standard Specification for Competition Wrestling Mats

    F1441 Standard Specification for Soft-Tissue Expander Devices

    F1546 Standard Specification for Fire Hose Nozzles

    F1546M Standard Specification for Fire Hose Nozzles

    F1551 Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials

    F1703 Standard Guide for Skating and Ice Hockey Playing Facilities

    F1742 Standard Specification for PVC Insulating Sheeting

    F1781 Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants

    F1828 Standard Specification for Ureteral Stents

    F1837M Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

    F1859 Standard Specification for Rubber Sheet Floor Covering Without Backing

    F1860 Standard Specification for Rubber Sheet Floor Covering With Backing

    F1923 Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway

    F2042 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication

    F2051 Standard Specification for Implantable Saline Filled Breast Prosthesis

    F2150 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products

    F2320 Standard Specification for Rubber Insulating Sheeting

    F2468 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications

    F2493 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire

    F2870 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire

    F2871 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire

    F2872 Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    G114 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D1349 Practice for Rubber--Standard Temperatures for Testing

    D1566 Terminology Relating to Rubber

    D3182 Practice for Rubber--Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

    D3183 Practice for Rubber--Preparation of Pieces for Test Purposes from Products

    D3767 Practice for Rubber--Measurement of Dimensions

    D4483 Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

    E4 Practices for Force Verification of Testing Machines