ASTM D4057 - 06(2011) Standard Practice for Manual Sampling of Petroleum and Petroleum ProductsCiting ASTM Standards
Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.
D56 Standard Test Method for Flash Point by Tag Closed Cup Tester D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure D88 Standard Test Method for Saybolt Viscosity D91 Standard Test Method for Precipitation Number of Lubricating Oils D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester D94 Standard Test Methods for Saponification Number of Petroleum Products D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) D187 Standard Test Method for Burning Quality of Kerosine D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) D381 Standard Test Method for Gum Content in Fuels by Jet Evaporation D396 Standard Specification for Fuel Oils D473 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method D482 Standard Test Method for Ash from Petroleum Products D483 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products D525 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method) D613 Standard Test Method for Cetane Number of Diesel Fuel Oil D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water D808 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) D873 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method) D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives D893 Standard Test Method for Insolubles in Used Lubricating Oils D909 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline D910 Standard Specification for Aviation Gasolines D923 Standard Practices for Sampling Electrical Insulating Liquids D943 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils D975 Standard Specification for Diesel Fuel Oils D1015 Standard Test Method for Freezing Points of High-Purity Hydrocarbons D1018 Standard Test Method for Hydrogen In Petroleum Fractions D1091 Standard Test Methods for Phosphorus in Lubricating Oils and Additives D1093 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure D1298 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method D1318 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method) D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption D1322 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel D1401 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) D1552 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) D1655 Standard Specification for Aviation Turbine Fuels D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) D1839 Standard Test Method for Amyl Nitrate in Diesel Fuels D2068 Standard Test Method for Determining Filter Blocking Tendency D2070 Standard Test Method for Thermal Stability of Hydraulic Oils D2272 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel D2273 Standard Test Method for Trace Sediment in Lubricating Oils D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) D2386 Standard Test Method for Freezing Point of Aviation Fuels D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry D2638 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography D2892 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column) D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry D3143 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) D3228 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method D3231 Standard Test Method for Phosphorus in Gasoline D3237 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications D3341 Standard Test Method for Lead in Gasoline - Iodine Monochloride Method D3605 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy D3606 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping D3701 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry D3703 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels D3710 Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography D3711 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors D3764 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy D4006 Standard Test Method for Water in Crude Oil by Distillation D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) D4052 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter D4053 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy D4055 Standard Test Method for Pentane Insolubles by Membrane Filtration D4176 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products D4291 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil D4292 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke D4293 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry D4304 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines D4306 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination D4310 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils D4377 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration D4378 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines D4418 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines D4530 Standard Test Method for Determination of Carbon Residue (Micro Method) D4539 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) D4625 Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F) D4735 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test D4742 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT) D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel D4807 Standard Test Method for Sediment in Crude Oil by Membrane Filtration D4808 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel D4815 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography D4860 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) D4870 Standard Test Method for Determination of Total Sediment in Residual Fuels D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration D4929 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil D4930 Standard Test Method for Dust Control Material on Calcined Petroleum Coke D4951 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry D4953 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) D5002 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer D5004 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement D5057 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy D5134 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography D5184 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry D5185 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) D5187 Standard Test Method for Determination of Crystallite Size (L D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method) D5191 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) D5236 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) D5291 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants D5292 Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy D5293 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –5 and –35°C Using Cold-Cranking Simulator D5304 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method) D5439 Standard Test Method for Determination of Sediment in Moellon D5441 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography D5443 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200°C by Multi-Dimensional Gas Chromatography D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence D5482 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric) D5501 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography D5580 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography D5622 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis D5623 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection D5705 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry D5709 Standard Test Method for Sieve Analysis of Petroleum Coke D5761 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials D5762 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence D5763 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware D5769 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method) D5772 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method) D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method) D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method D5842 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement D5845 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy D5846 Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus D5853 Standard Test Method for Pour Point of Crude Oils D5854 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products D5863 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry D5949 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration D5985 Standard Test Method for Pour Point of Petroleum Products (Rotational Method) D5986 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C D6021 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection D6045 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method D6074 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils D6078 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) D6122 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems D6201 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation D6203 Standard Test Method for Thermal Stability of Way Lubricants D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration D6224 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment D6227 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component D6258 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels D6277 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration D6334 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels D6376 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy D6377 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method) D6378 Standard Test Method for Determination of Vapor Pressure (VP D6379 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils D6443 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure) D6447 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils D6450 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester D6468 Standard Test Method for High Temperature Stability of Middle Distillate Fuels D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems D6470 Standard Test Method for Salt in Crude Oils (Potentiometric Method) D6514 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils D6553 Standard Test Method for Coolant Compatibility of Way Lubricants D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products D6591 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection D6593 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions D6595 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel D6624 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data D6728 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry D6730 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100Metre Capillary (with Precolumn) High-Resolution Gas Chromatography D6732 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry D6733 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography D6748 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer) D6749 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels D6756 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer D6793 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus D6794 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time D6795 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time D6810 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry D6822 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber D6892 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method) D6895 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C D6898 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig D6920 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection D6922 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils D6971 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures) D7039 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry D7040 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection D7058 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer D7059 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography D7060 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method) D7061 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device D7094 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip D7096 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography D7110 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures D7111 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) D7112 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection) D7153 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method) D7154 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method) D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils ( D7169 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method D7171 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter D7214 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry D7223 Standard Specification for Aviation Certification Turbine Fuel D7236 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) D7260 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants D7261 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer D7303 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method) D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography D7321 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection D7343 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants D7344 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method) D7345 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method D7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products D7371 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method) D7397 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method) D7416 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome D7417 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter) D7418 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring D7419 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels D7455 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis D7462 Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method) D7463 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures and Fuel Associated Water D7464 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20) D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT) D7524 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method D7525 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT) D7545 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT) D7547 Standard Specification for Hydrocarbon Only Unleaded Aviation Gasoline D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons D7576 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography D7579 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol D7590 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel D7596 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel D7619 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction D7622 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction D7623 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method D7647 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction D7662 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils D7667 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method D7668 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method D7669 Standard Guide for Practical Lubricant Condition Data Trend Analysis D7671 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method D7679 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils D7683 Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method) D7688 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation D7689 Standard Test Method for Cloud Point of Petroleum Products (Mini Method) D7690 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography D7691 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) D7718 Standard Practice for Obtaining In-Service Samples of Lubricating Grease D7719 Standard Specification for High Octane Unleaded Test Fuel D7740 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants D7751 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis D7827 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device E1655 Standard Practices for Infrared Multivariate Quantitative Analysis E2412 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry G205 Standard Guide for Determining Corrosivity of Crude Oils Referenced ASTM Standards
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
| ||