ASTM D4054 - 09 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    A240/A240M Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

    B36/B36M Specification for Brass Plate, Sheet, Strip, And Rolled Bar

    B93/B93M Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings

    D56 Test Method for Flash Point by Tag Closed Cup Tester

    D86 Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    D257 Test Methods for DC Resistance or Conductance of Insulating Materials

    D395 Test Methods for Rubber Property--Compression Set

    D412 Test Methods for Vulcanized Rubber and Thermoplastic Elastomers--Tension

    D445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D471 Test Method for Rubber Property--Effect of Liquids

    D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

    D924 Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

    D1002 Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

    D1319 Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

    D1331 Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents

    D1414 Test Methods for Rubber O-Rings

    D1655 Specification for Aviation Turbine Fuels

    D2240 Test Method for Rubber Property--Durometer Hardness

    D2386 Test Method for Freezing Point of Aviation Fuels

    D2425 Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry

    D2624 Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

    D2717 Test Method for Thermal Conductivity of Liquids

    D2887 Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

    D3241 Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

    D3359 Test Methods for Measuring Adhesion by Tape Test

    D3363 Test Method for Film Hardness by Pencil Test

    D3701 Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

    D3703 Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

    D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester

    D3948 Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

    D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D4066 Classification System for Nylon Injection and Extrusion Materials (PA)

    D4629 Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

    D5001 Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

    D5291 Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

    D5304 Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

    D5363 Specification for Anaerobic Single-Component Adhesives (AN)

    D5972 Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

    D6304 Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

    D6378 Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

    D6379 Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates--High Performance Liquid Chromatography Method with Refractive Index Detection

    D6732 Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

    D6793 Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

    D7111 Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    E411 Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine

    E659 Test Method for Autoignition Temperature of Liquid Chemicals

    E681 Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)

    E1269 Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry