Standards

ASTM D4052 - 11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

D117 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin

D304 Standard Specification for n-Butyl Alcohol (Butanol)

D329 Standard Specification for Acetone

D330 Standard Specification for 2-Butoxyethanol

D331 Standard Specification for 2-Ethoxyethanol

D396 Standard Specification for Fuel Oils

D483 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

D608 Standard Specification for Dibutyl Phthalate

D740 Standard Specification for Methyl Ethyl Ketone

D770 Standard Specification for Isopropyl Alcohol

D891 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals

D910 Standard Specification for Aviation Gasolines

D976 Standard Test Method for Calculated Cetane Index of Distillate Fuels

D1007 Standard Specification for sec-Butyl Alcohol

D1045 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

D1153 Standard Specification for Methyl Isobutyl Ketone1, 2

D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

D1217 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

D1480 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer

D1481 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer

D1492 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration

D1555M Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]

D1555 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane

D1655 Standard Specification for Aviation Turbine Fuels

D1718 Standard Specification for Isobutyl Acetate (95% Grade)

D1719 Standard Specification for Isobutyl Alcoholl

D1969 Standard Specification for 2-Ethylhexanol

D2140 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin

D2190 Standard Specification for Vinyl Acetate

D2225 Standard Test Methods for Silicone Fluids Used for Electrical Insulation

D2501 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils

D2627 Standard Specification for Diacetone Alcohol

D2634 Standard Specification for Methyl Amyl Acetate (95 % Grade)

D2635 Standard Specification for Methyl Isobutyl Carbinol

D2636 Standard Specification for Hexylene Glycol

D2693 Standard Specification for Ethylene Glycol

D2694 Standard Specification for Diethylene Glycol

D2880 Standard Specification for Gas Turbine Fuel Oils

D2892 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

D2916 Standard Specification for Isophorone

D2917 Standard Specification for Methyl Isoamyl Ketone

D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

D3128 Standard Specification for 2-Methoxyethanol

D3130 Standard Specification for n-Propyl Acetate (96 % Grade)

D3131 Standard Specification for Isopropyl Acetate (99 % Grade)

D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

D3338/D3338M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D3505 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals

D3540 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)

D3622 Standard Specification for 1-Propanol (n-Propyl Alcohol)

D3734 Standard Specification for High-Flash Aromatic Naphthas

D3735 Standard Specification for VM&P Naphthas

D4054 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

D4171 Standard Specification for Fuel System Icing Inhibitors

D4304 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines

D4360 Standard Specification for Methyl n-Amyl Ketone

D4529 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D4614 Standard Specification for Ethyl Acetate (All Grades)

D4615 Standard Specification for n-Butyl Acetate (All Grades)

D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

D4652 Standard Specification for Silicone Fluid Used for Electrical Insulation

D4669 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

D4737 Standard Test Method for Calculated Cetane Index by Four Variable Equation

D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

D4815 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

D4836 Standard Specification for Dipropylene Glycol Monomethyl Ether

D4837 Standard Specification for Propylene Glycol Monomethyl Ether

D4857 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels

D4895 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

D5002 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

D5137 Standard Specification for Hexyl Acetate

D5164 Standard Specification for Propylene Glycol and Dipropylene Glycol

D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons

D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

D5501 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography

D5580 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

D5622 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

D5769 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

D5845 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy

D5917 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

D5931 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter

D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

D5986 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy

D6074 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

D6158 Standard Specification for Mineral Hydraulic Oils

D6224 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

D6227 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

D6277 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

D6296 Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography

D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

D6379 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

D6550 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

D6618 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure

D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

D6710 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

D6756 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

D6813 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps

D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

D6975 Standard Test Method for Cummins M11 EGR Test

D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

D6987/D6987M Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection

D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

D7044 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids

D7058 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

D7223 Standard Specification for Aviation Certification Turbine Fuel

D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography

D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

D7347 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography

D7371 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)

D7388 Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)

D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

D7457 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

D7468 Standard Test Method for Cummins ISM Test

D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

D7544 Standard Specification for Pyrolysis Liquid Biofuel

D7547 Standard Specification for Hydrocarbon Only Unleaded Aviation Gasoline

D7549 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

D7576 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography

D7583 Standard Test Method for John Deere Coolant Cavitation Test

D7589 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel

D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

D7640 Standard Specification for Engine Coolant Grade Glycerin

D7713 Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)

D7719 Standard Specification for High Octane Unleaded Test Fuel

E202 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols

E1119 Standard Specification for Industrial Grade Ethylene Glycol

E1177 Standard Specification for Engine Coolant Grade Ethylene Glycol

E2470 Standard Specification for Polyester Grade Ethylene Glycol

F2084/F2084M Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments

Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.