D618 Standard Practice for Conditioning Plastics for Testing

D638 Standard Test Method for Tensile Properties of Plastics

D695 Standard Test Method for Compressive Properties of Rigid Plastics

D706 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds

D707 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds

D732 Standard Test Method for Shear Strength of Plastics by Punch Tool

D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

D785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

D788 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

D789 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)

D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

D952 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

D1043 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

D1204 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

D1562 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds

D1708 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

D1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

D1894 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

D1922 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

D1938 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

D1972 Standard Practice for Generic Marking of Plastic Products

D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

D2582 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

D2673 Standard Specification for Oriented Polypropylene Film

D2838 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting

D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

D3763 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

D3935 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material

D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

D4065 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

D4067 Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

D4093 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

D4203 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

D4349 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

D4440 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

D4473 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior

D4549 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

D4634 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

D4673 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

D4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

D5023 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

D5024 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression

D5026 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension

D5045 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

D5083 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

D5138 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

D5204 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials

D5205 Standard Classification System for Polyetherimide (PEI) Materials

D5336 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials

D5628 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

D5675 Standard Specification for Fluoropolymer Micropowders

D5740 Standard Guide for Writing Material Standards in the Classification D4000 Format

D5857 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

D5927 Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

D6098 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

D6108 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

D6110 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

D6112 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

D6261 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

D6272 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

D6338 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods

D6339 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

D6358 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods

D6394 Standard Specification for Sulfone Plastics (SP)

D6457 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)

D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

D6713 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

D6778 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

D6779 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

D6835 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

D6865 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM&

D7031 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

D7032 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)

D7192 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors

D7292 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

D7293 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

D7474 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents

F561 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

F1488 Standard Specification for Coextruded Composite Pipe

F1499 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

F2026 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications