ASTM D3924 - 80(2011) Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D564 Standard Test Methods for Liquid Paint Driers

    D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

    D2134 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker

    D2486 Standard Test Methods for Scrub Resistance of Wall Paints

    D2805 Standard Test Method for Hiding Power of Paints by Reflectometry

    D3359 Standard Test Methods for Measuring Adhesion by Tape Test

    D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

    D4707 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application

    D4828 Standard Test Methods for Practical Washability of Organic Coatings

    D4958 Standard Test Method for Comparison of the Brush Drag of Latex Paints

    D5007 Standard Test Method for Wet-to-Dry Hiding Change

    D5068 Standard Practice for Preparation of Paint Brushes for Evaluation

    D5069/D5069M Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings

    D5125 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups

    D5150 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller

    D5326 Standard Test Method for Color Development in Tinted Latex Paints

    D5401 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood

    D5895 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders

    D5913 Standard Test Method for Evaluation of Cleanability of Paint Brushes

    D5965 Standard Test Methods for Specific Gravity of Coating Powders

    D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

    D6189 Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings

    D6279 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings

    D6489 Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating

    D6490 Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels

    D6532 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

    D6577 Standard Guide for Testing Industrial Protective Coatings

    D6736 Standard Test Method for Burnish Resistance of Latex Paints

    D6900 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

    D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

    D7073 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films

    D7088 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry

    D7089 Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing

    D7187 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching

    D7190 Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films

    D7488 Standard Test Method for Open Time of Latex Paints

    D7538 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device

    D7539 Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints

    E1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1797 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    G147 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests

    G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E41 Terminology Relating To Conditioning

    E171 Practice for Conditioning and Testing Flexible Barrier Packaging

    E337 Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)