ASTM D3740 - 12a Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

    D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D806 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures

    D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve

    D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

    D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

    D1411 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes

    D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method

    D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

    D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils

    D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

    D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes

    D1632 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory

    D1633 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

    D1634 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)

    D1635/D1635M Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading

    D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils

    D1997 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass

    D2166/D2166M Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

    D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

    D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors

    D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

    D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

    D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)

    D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil

    D2844/D2844M Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils

    D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock

    D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

    D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens

    D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

    D2944 Standard Practice of Sampling Processed Peat Materials

    D2973 Standard Test Method for Total Nitrogen in Peat Materials

    D2974 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils

    D2978 Standard Test Method for Volume of Processed Peat Materials

    D2980 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials

    D3080/D3080M Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions

    D3155 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures

    D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil

    D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

    D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

    D3551 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer

    D3689/D3689M Standard Test Methods for Deep Foundations Under Static Axial Tensile Load

    D3877 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures

    D3966/D3966M Standard Test Methods for Deep Foundations Under Lateral Load

    D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

    D3999/D3999M Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus

    D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method

    D4016 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method)

    D4186/D4186M Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading

    D4219 Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils

    D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

    D4223/D4223M Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils

    D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

    D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

    D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

    D4320/D4320M Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters

    D4373 Standard Test Method for Rapid Determination of Carbonate Content of Soils

    D4380 Standard Test Method for Density of Bentonitic Slurries

    D4381/D4381M Standard Test Method for Sand Content by Volume of Bentonitic Slurries

    D4395 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method

    D4403 Standard Practice for Extensometers Used in Rock

    D4404 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry

    D4427 Standard Classification of Peat Samples by Laboratory Testing

    D4428/D4428M Standard Test Methods for Crosshole Seismic Testing

    D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place

    D4435 Standard Test Method for Rock Bolt Anchor Pull Test

    D4436 Standard Test Method for Rock Bolt Long-Term Load Retention Test

    D4452 Standard Practice for X-Ray Radiography of Soil Samples

    D4506 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test

    D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat

    D4525 Standard Test Method for Permeability of Rocks by Flowing Air

    D4535 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer

    D4542 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer

    D4543 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances

    D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Soils

    D4553 Standard Test Method for Determining In Situ Creep Characteristics of Rock

    D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities

    D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test

    D4609 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization

    D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks

    D4623 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge

    D4633 Standard Test Method for Energy Measurement for Dynamic Penetrometers

    D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating

    D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks

    D4645 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method

    D4647/D4647M Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test

    D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil

    D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils

    D4729 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method

    D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

    D4829 Standard Test Method for Expansion Index of Soils

    D4832 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders

    D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

    D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method

    D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

    D4945 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations

    D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating

    D4971 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack

    D4972 Standard Test Method for pH of Soils

    D4992 Standard Practice for Evaluation of Rock to be Used for Erosion Control

    D5030/D5030M Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

    D5080 Standard Test Method for Rapid Determination of Percent Compaction

    D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

    D5093 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring

    D5102 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

    D5143 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography

    D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

    D5202 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils

    D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

    D5239 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

    D5240/D5240M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate

    D5255 Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock

    D5268 Standard Specification for Topsoil Used for Landscaping Purposes

    D5270 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

    D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

    D5311/D5311M Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil

    D5312/D5312M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions

    D5313/D5313M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

    D5321/D5321M Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear

    D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure

    D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges

    D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

    D5435 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection

    D5519 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials

    D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression

    D5521/D5521M Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers

    D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer

    D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

    D5715 Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)

    D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

    D5778 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils

    D5779/D5779M Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control

    D5780 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load

    D5781/D5781M Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5784/D5784M Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method

    D5872/D5872M Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5873 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method

    D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil

    D5875/D5875M Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes

    D5881 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)

    D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

    D5883 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

    D5911/D5911M Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site

    D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

    D5971/D5971M Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material

    D5982 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)

    D6023 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)

    D6024 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application

    D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core

    D6035/D6035M Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter

    D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

    D6067 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization

    D6128 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell

    D6168 Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids

    D6169/D6169M Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations

    D6230 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers

    D6236 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil

    D6243/D6243M Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method

    D6276 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

    D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration

    D6393 Standard Test Method for Bulk Solids Characterization by Carr Indices

    D6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

    D6459 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion

    D6462 Standard Practice for Silt Fence Installation

    D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils

    D6473 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control

    D6475 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets

    D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation

    D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils

    D6539 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air

    D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

    D6598 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations

    D6635 Standard Test Method for Performing the Flat Plate Dilatometer

    D6682 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester

    D6683 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

    D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

    D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

    D6773 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester

    D6780/D6780M Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)

    D6820 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation

    D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge

    D6910/D6910M Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

    D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

    D6940 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

    D6941 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders

    D7012 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

    D7013/D7013M Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges

    D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils

    D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration

    D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature

    D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

    D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions

    D7128 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation

    D7181 Method for Consolidated Drained Triaxial Compression Test for Soils

    D7208 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

    D7242/D7242M Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers

    D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

    D7262 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids

    D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

    D7299 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe

    D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain

    D7351 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications

    D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer

    D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

    D7383 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations

    D7400 Standard Test Methods for Downhole Seismic Testing

    D7401 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests

    D7458 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection

    D7481 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder

    D7503 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils

    D7608 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces

    D7625 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method

    D7626 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay

    D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

    D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

    D7743 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders

    D7758 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

    D7760 Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter

    D7764 Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers

    D7830/D7830M Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge

    D7858 Standard Test Method for Determination of Bisphenol A in Soil, Sludge and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry

    E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

    E2787 Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    E2838 Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    E2866 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C1077 Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

    D653 Terminology Relating to Soil, Rock, and Contained Fluids

    D3666 Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

    D5255 Practice for Certification of Personnel Engaged in the Testing of Soil and Rock

    E329 Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

    E1187 Terminology Relating to Conformity Assessment

    E1301 Guide for Proficiency Testing by Interlaboratory Comparisons