ASTM D2622 - 10 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D240 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

    D396 Standard Specification for Fuel Oils

    D910 Standard Specification for Aviation Gasolines

    D975 Standard Specification for Diesel Fuel Oils

    D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D1655 Standard Specification for Aviation Turbine Fuels

    D2880 Standard Specification for Gas Turbine Fuel Oils

    D3238 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method

    D3338/D3338M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D3699 Standard Specification for Kerosine

    D3994 Standard Performance Specification for Woven Swimwear Fabrics

    D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

    D4485 Standard Specification for Performance of Active API Service Category Engine Oils

    D4529 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

    D4809 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

    D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

    D4857 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

    D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels

    D5623 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

    D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines

    D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

    D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

    D6074 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

    D6201 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D6227 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

    D6334 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

    D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

    D6593 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

    D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

    D6618 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

    D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

    D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure(0.4?% Fuel Sulfur) and 1N Procedure(0.04?% Fuel Sulfur)

    D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

    D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

    D6838 Standard Test Method for Cummins M11 High Soot Test

    D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

    D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

    D6975 Standard Test Method for Cummins M11 EGR Test

    D6987/D6987M Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

    D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

    D7223 Standard Specification for Aviation Certification Turbine Fuel

    D7343 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

    D7372 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results

    D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

    D7455 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

    D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

    D7468 Standard Test Method for Cummins ISM Test

    D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

    D7547 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline

    D7549 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

    D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

    D7578 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

    D7583 Standard Test Method for John Deere Coolant Cavitation Test

    D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel

    D7666 Standard Specification for Triglyceride Burner Fuel

    D7719 Standard Specification for High-Octane Unleaded Fuel

    D7807 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection

    D7862 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D4057 Practice for Manual Sampling of Petroleum and Petroleum Products

    D4177 Practice for Automatic Sampling of Petroleum and Petroleum Products

    D4294 Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4927 Test Methods for Elemental Analysis of Lubricant and Additive Components--Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

    D6259 Practice for Determination of a Pooled Limit of Quantitation

    D6299 Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

    D7343 Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications