ASTM D2584 - 11 Standard Test Method for Ignition Loss of Cured Reinforced Resins


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C273/C273M Standard Test Method for Shear Properties of Sandwich Core Materials

    C297/C297M Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

    C364/C364M Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions

    C581 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

    C582 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

    D2344/D2344M Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

    D2734 Standard Test Methods for Void Content of Reinforced Plastics

    D3039/D3039M Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

    D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

    D3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D3410/D3410M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading

    D3489 Standard Test Methods for Microcellular Urethane Materials

    D3517 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

    D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

    D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

    D3935 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material

    D3982 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts

    D4000 Standard Classification System for Specifying Plastic Materials

    D4097 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

    D4203 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

    D4255/D4255M Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

    D4762 Standard Guide for Testing Polymer Matrix Composite Materials

    D5229/D5229M Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials

    D5364 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units

    D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

    D5448/D5448M Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5449/D5449M Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5450/D5450M Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5467/D5467M Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam

    D5630 Standard Test Method for Ash Content in Plastics

    D5766/D5766M Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

    D5961/D5961M Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

    D6041 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

    D6115 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites

    D6416/D6416M Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load

    D6484/D6484M Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

    D6783 Standard Specification for Polymer Concrete Pipe

    D7078/D7078M Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

    D7248/D7248M Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens

    D7745 Standard Practice for Testing Pultruded Composites

    E1556 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair

    F790 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

    F1173 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D618 Practice for Conditioning Plastics for Testing

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method