ASTM D235 - 02(2012) Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D211 Standard Specification for Chrome Yellow and Chrome Orange Pigments

    D268 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

    D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

    D480 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes

    D564 Standard Test Methods for Liquid Paint Driers

    D566 Standard Test Method for Dropping Point of Lubricating Grease

    D609 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

    D1404/D1404M Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease

    D1816 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes

    D2067 Standard Test Method for Coarse Particles in Printing Ink Dispersions

    D2218 Standard Specification for Molybdate Orange Pigments

    D2251 Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

    D2649 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

    D3022 Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill

    D3023 Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents

    D3705 Standard Test Method for Misting Properties of Lubricating Fluids

    D4857 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

    D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

    D5182 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

    D5402 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

    D5500 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D5579 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

    D5598 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

    D5704 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

    D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

    D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

    D6121 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

    D6201 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D6593 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

    D6618 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

    D6668 Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

    D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

    D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

    D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4?% Fuel Sulfur) and 1N Procedure (0.04?% Fuel Sulfur)

    D6793 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

    D6837 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

    D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

    D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

    D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

    D6987/D6987M Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

    D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

    D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

    D7421 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

    D7452 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading

    D7468 Standard Test Method for Cummins ISM Test

    D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

    D7549 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

    D7583 Standard Test Method for John Deere Coolant Cavitation Test

    D7589 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

    D7603 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils

    F482 Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals

    F483 Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D56 Test Method for Flash Point by Tag Closed Cup Tester

    D86 Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    D130 Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D156 Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

    D268 Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

    D1133 Test Method for Kauri-Butanol Value of Hydrocarbon Solvents

    D1159 Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

    D1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

    D1296 Test Method for Odor of Volatile Solvents and Diluents

    D2710 Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

    D3227 Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

    D3257 Test Methods for Aromatics in Mineral Spirits by Gas Chromatography

    D3278 Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E300 Practice for Sampling Industrial Chemicals