ASTM D2244 - 14 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    C609 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile

    C744 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units

    C1364 Standard Specification for Architectural Cast Stone

    C1376 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass

    C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

    C1510 Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry

    C1520 Standard Guide for Paintability of Latex Sealants

    C1649 Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated

    C1650 Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated

    D154 Standard Guide for Testing Varnishes

    D279 Standard Test Methods for Bleeding of Pigments

    D333 Standard Guide for Clear and Pigmented Lacquers

    D387 Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller

    D822/D822M Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D868 Standard Practice for Determination of Degree of Bleeding of Traffic Paint

    D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

    D1148 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

    D2066 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions

    D2205 Standard Guide for Selection of Tests for Traffic Paints

    D2248 Standard Practice for Detergent Resistance of Organic Finishes

    D2276 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

    D2454 Standard Practice for Determining the Effect of Overbaking on Organic Coatings

    D2745 Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements

    D2985/D2985M Standard Test Method for Color of Asbestos

    D3002 Standard Guide for Evaluation of Coatings Applied to Plastics

    D3022 Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill

    D3134 Standard Practice for Establishing Color and Gloss Tolerances

    D3322 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal

    D3361/D3361M Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D3424 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

    D3451 Standard Guide for Testing Coating Powders and Powder Coatings

    D3679 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding

    D3730 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings

    D3794 Standard Guide for Testing Coil Coatings

    D4141/D4141M Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings

    D4302 Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints

    D4303 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials

    D4459 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

    D4477 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

    D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

    D4674 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

    D4726 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D5031/D5031M Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings

    D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings

    D5150 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller

    D5215 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

    D5319 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

    D5324 Standard Guide for Testing Water-Borne Architectural Coatings

    D5326 Standard Test Method for Color Development in Tinted Latex Paints

    D5382 Standard Guide to Evaluation of Optical Properties of Powder Coatings

    D5452 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

    D5531 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings

    D6290 Standard Test Method for Color Determination of Plastic Pellets

    D6531 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement

    D6577 Standard Guide for Testing Industrial Protective Coatings

    D6695 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

    D6763 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents

    D6864 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products

    D6901 Standard Specification for Artists' Colored Pencils

    D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D7195 Standard Guide for Protocol for Setting Color Specifications for a Material

    D7251 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products

    D7270 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings

    D7445 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)

    D7793 Standard Specification for Insulated Vinyl Siding

    D7856 Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space

    E308 Standard Practice for Computing the Colors of Objects by Using the CIE System

    E805 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials

    E991 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method

    E1247 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry

    E1331 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry

    E1345 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements

    E1347 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

    E1348 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry

    E1349 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry

    E2167 Standard Guide for Selection and Use of Stone Consolidants

    E2214 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments

    E2301 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry

    E2466 Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology

    E2808 Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis

    E2867 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry

    F925 Standard Test Method for Resistance to Chemicals of Resilient Flooring

    F934 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

    F940 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

    F1206 Standard Test Method for Evaluating Color Image Output from Color Printers and Copiers

    F1514 Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change

    F1515 Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change

    F1721 Standard Practices for Determining Stability of Direct Thermal Imaging Products

    F1945 Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting

    F1946/F1946M Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight

    F2035 Standard Practice for Measuring the Dark Stability of Ink Jet Prints

    F2037 Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments

    F2292 Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods—Drip, Spray, Submersion and Rub

    F2366 Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus

    F2408 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

    F2589 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets

    F2957 Standard Specification for Ornamental Aluminum Fence Systems

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    G178 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique

    G201 Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D1729 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials

    D4086 Practice for Visual Evaluation of Metamerism

    E284 Terminology of Appearance

    E308 Practice for Computing the Colors of Objects by Using the CIE System

    E805 Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials

    E1164 Practice for Obtaining Spectrometric Data for Object-Color Evaluation