A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

A933/A933M Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

A974 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

A975 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

A978/A978M Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications

A1056 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings

C425 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

C497M Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)

C497 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile

C505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints

C505M Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)

C542 Standard Specification for Lock-Strip Gaskets

C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

C836/C836M Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

C877M Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)

C877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections

C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)

C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals

C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems

C1187 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks

C1208/C1208M Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels

C1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

C1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals

C1478M Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)

C1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures

C1644 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

D120 Standard Specification for Rubber Insulating Gloves

D378 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type

D380 Standard Test Methods for Rubber Hose

D471 Standard Test Method for Rubber Property—Effect of Liquids

D622 Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System

D785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

D865 Standard Test Method for Rubber - Deterioration by Heating in Air (Test Tube Enclosure)

D1051 Standard Specification for Rubber Insulating Sleeves

D1330 Standard Specification for Rubber Sheet Gaskets

D1414 Standard Test Methods for Rubber O-Rings

D1415 Standard Test Method for Rubber Property—International Hardness

D1630 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)

D1869 Standard Specification for Rubber Rings for Asbestos-Cement Pipe

D2000 Standard Classification System for Rubber Products in Automotive Applications

D2148 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation

D2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

D2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

D3489 Standard Test Methods for Microcellular Urethane Materials

D3542 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

D3667 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

D3771 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors

D3847 Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures

D3851 Standard Specification for Urethane Microcellular Shoe Soling Materials

D3903 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems

D4000 Standard Classification System for Specifying Plastic Materials

D4014 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

D4020 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

D4054 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

D4068 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

D4289 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

D4485 Standard Specification for Performance of Active API Service Category Engine Oils

D4619 Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems

D4800 Standard Guide for Classifying and Specifying Adhesives

D5498 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities

D5662 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

D5747 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

D5947 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

D5963 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)

D5964 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils

D5973 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

D6134 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems

D6284 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine

D6338 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods

D6343 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications

D6361/D6361M Standard Guide for Selecting Cleaning Agents and Processes

D6411/D6411M Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials

D6412/D6412M Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials

D6465 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants

D6546 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

D6835 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

D6905 Standard Test Method for Impact Flexibility of Organic Coatings

D6909 Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer

D6924 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

D6962 Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings

D7106 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes

D7121 Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum

D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

D7230 Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates

D7255 Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Double-Head Method)

D7311/D7311M Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane

D7602 Standard Practice for Installation of Vulcanized Rubber Linings

D7735 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures

E501 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

E524 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

E660 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine

E670 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter

E1068 Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid

E1136 Standard Specification for P195/75R14 Radial Standard Reference Test Tire

E1551 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment

E1612 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures

E1749 Standard Terminology Relating to Rigid Wall Relocatable Shelters

E1783 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures

E1844 Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire

E2203 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

E2411 Standard Specification for Chemical Warfare Vapor Detector (CWVD)

F150 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

F381 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines

F477 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

F513 Standard Specification for Eye and Face Protective Equipment for Hockey Players

F561 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

F624 Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications

F641 Standard Specification for Implantable Epoxy Electronic Encapsulants

F665 Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application

F780 Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis

F790 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

F881 Standard Specification for Silicone Elastomer Facial Implants

F913 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe

F942 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures

F963 Standard Consumer Safety Specification for Toy Safety

F1148 Standard Consumer Safety Performance Specification for Home Playground Equipment

F1344 Standard Specification for Rubber Floor Tile

F1487 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use

F1502 Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles

F1578 Standard Test Method for Contact Closure Cycling of a Membrane Switch

F1587 Standard Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders

F1661 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch

F1735 Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits

F1742 Standard Specification for PVC Insulating Sheeting

F1750 Specification for Paintball Marker Threaded-Propellant Source Interface

F1781 Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants

F1837M Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

F1859 Standard Specification for Rubber Sheet Floor Covering Without Backing

F1860 Standard Specification for Rubber Sheet Floor Covering With Backing

F1882 Standard Specification for Residential Basketball Systems

F1918 Standard Safety Performance Specification for Soft Contained Play Equipment

F1922 Standard Test Method for Tires, Pneumatic, Vehicular, Highway

F1957 Standard Test Method for Composite Foam Hardness-Durometer Hardness

F1974 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

F2042 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication

F2169 Standard Specification for Resilient Stair Treads

F2207 Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe

F2225 Standard Safety Specification for Consumer Trampoline Enclosures

F2320 Standard Specification for Rubber Insulating Sheeting

F2373 Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months

F2468 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications

F2493 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire

F2573 Standard Specification for Low Velocity Resilient Material Projectile

F2653 Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders

F2870 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire

F2871 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire

F2872 Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire

G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus

G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests

G114 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service