Standards

ASTM D2216 - 10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

C1345 Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry

C1733 Standard Test Method for Distribution Coefficients of Inorganic Species by the Batch Method

D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils

D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve

D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method

D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils

D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

D1633 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils

D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock

D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens

D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

D3551 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer

D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe

D3877 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures

D3987 Standard Practice for Shake Extraction of Solid Waste with Water

D3999 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus

D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method

D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place

D4543 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances

D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils

D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities

D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test

D4564 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method

D4609 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization

D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating

D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks

D4646 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments

D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

D4793 Standard Test Method for Sequential Batch Extraction of Waste with Water

D4829 Standard Test Method for Expansion Index of Soils

D4843 Standard Test Method for Wetting and Drying Test of Solid Wastes

D4874 Standard Test Method for Leaching Solid Material in a Column Apparatus

D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating

D5080 Standard Test Method for Rapid Determination of Percent Compaction

D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

D5101 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems

D5102 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil

D5313/D5313M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure

D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges

D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method

D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter

D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil

D5887 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

D5982 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)

D5993 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners

D6031/D6031M Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes

D6035 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter

D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

D6276 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils

D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation

D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils

D6539 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air

D6565 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method

D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

D6642 Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux

D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

D6766 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions

D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge

D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

D6940 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

D7012 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature

D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

D7181 Method for Consolidated Drained Triaxial Compression Test for Soils

D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

D7277 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow

D7294 Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site-A Site Contaminated With Chemicals of Interest

D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer

D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

D7481 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder

D7503 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils

D7608 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces

D7625 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method

D7663 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

E850 Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill

E1197 Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test

E1689 Standard Guide for Developing Conceptual Site Models for Contaminated Sites

E1868 Standard Test Method for Loss-On-Drying by Thermogravimetry

E2060 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes

E2278 Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage

E2399 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems

F1668 Standard Guide for Construction Procedures for Buried Plastic Pipe

F1815 Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones

G158 Standard Guide for Three Methods of Assessing Buried Steel Tanks

Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.