Standards

ASTM D1587 - 08(2012)e1 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes

Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

C1255 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy

C1345 Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry

D1452 Standard Practice for Soil Exploration and Sampling by Auger Borings

D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)

D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil

D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil

D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

D3999 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus

D4220 Standard Practices for Preserving and Transporting Soil Samples

D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat

D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils

D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil

D4700 Standard Guide for Soil Sampling from the Vadose Zone

D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils

D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

D4823 Standard Guide for Core Sampling Submerged, Unconsolidated Sediments

D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

D5092 Standard Practice for Design and Installation of Groundwater Monitoring Wells

D5101 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems

D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil

D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

D5730 Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater

D5781 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

D5782 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

D5783 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

D5784 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

D5875 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

D5876 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

D6009 Standard Guide for Sampling Waste Piles

D6031/D6031M Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes

D6035 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter

D6063 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel

D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling

D6169 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations

D6232 Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities

D6282 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations

D6286 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization

D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration

D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils

D6597 Standard Practice for Assessment of Attaining Clean Up Level for Site Closure

D6640 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations

D6725 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils

D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

D7181 Method for Consolidated Drained Triaxial Compression Test for Soils

D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

E850 Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill

F1962 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings

Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.