A807/A807M Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

B789/B789M Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers

C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

C1170/C1170M Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

C1245/C1245M Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)

C1479M Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)

C1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations

D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids

D1079 Standard Terminology Relating to Roofing and Waterproofing

D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method

D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils

D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils

D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors

D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe

D3877 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures

D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils

D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

D5030 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

D5080 Standard Test Method for Rapid Determination of Percent Compaction

D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

D5321 Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method

D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter

D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil

D6243 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method

D6270 Standard Practice for Use of Scrap Tires in Civil Engineering Applications

D6539 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air

D6539 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air

D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer

D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

E850 Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill

E1266 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications

E2278 Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage