ASTM D1505 - 10 Standard Test Method for Density of Plastics by the Density-Gradient Technique


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D787 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

    D1185 Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping

    D1248 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

    D1593 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

    D1675 Standard Test Methods for Polytetrafluoroethylene Tubing

    D1895 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

    D2103 Standard Specification for Polyethylene Film and Sheeting

    D2238 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1

    D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

    D2684 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products

    D2734 Standard Test Methods for Void Content of Reinforced Plastics

    D2839 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

    D3124 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry

    D3171 Standard Test Methods for Constituent Content of Composite Materials

    D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

    D3664 Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment

    D3800M Standard Test Method for Density of High-Modulus Fibers

    D3981 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications

    D4000 Standard Classification System for Specifying Plastic Materials

    D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

    D4321 Standard Test Method for Package Yield of Plastic Film

    D4397 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

    D4635 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications

    D4649 Standard Guide for Selection and Use of Stretch Wrap Films

    D4762 Standard Guide for Testing Polymer Matrix Composite Materials

    D4801 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater

    D4883 Standard Test Method for Density of Polyethylene by the Ultrasound Technique

    D4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

    D5047 Standard Specification for Polyethylene Terephthalate Film and Sheeting

    D5203 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources

    D5514/D5514M Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics

    D5576 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

    D5577 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics

    D5721 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes

    D5747/D5747M Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

    D6248 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

    D6434 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes

    D6495 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners

    D6645 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry

    D7082 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

    D7273/D7273M Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites

    D7774 Standard Test Method for Flexural Fatigue Properties of Plastics

    D7791 Standard Test Method for Uniaxial Fatigue Properties of Plastics

    E252 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement

    F412 Standard Terminology Relating to Plastic Piping Systems

    F561 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

    F639 Standard Specification for Polyethylene Plastics for Medical Applications

    F648 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants

    F755 Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants

    F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing

    F1545 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

    F1925 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants

    F1960 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing

    F1986 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems

    F1987 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems

    F2025 Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment

    F2026 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications

    F2160 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)

    F2313 Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide

    F2389 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

    F2579 Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants

    F2718 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines

    F2720/F2720M Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe

    F2736 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe

    F2764/F2764M Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

    F2788/F2788M Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe

    F2805 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections

    F2818 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing

    F2820 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications

    F2854 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing

    F2881 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

    F2905/F2905M Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications

    F2929 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D883 Terminology Relating to Plastics

    D2839 Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

    D4703 Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method