Standards

ASTM D1356 - 05(2010) Standard Terminology Relating to Sampling and Analysis of Atmospheres

Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

D1357 Standard Practice for Planning the Sampling of the Ambient Atmosphere

D1607 Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)

D1608 Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)

D1739 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)

D1914 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres

D2010/D2010M Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique

D2913 Standard Test Method for Mercaptan Content of the Atmosphere

D2914 Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)

D3154 Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)

D3162 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)

D3195/D3195M Standard Practice for Rotameter Calibration

D3249 Standard Practice for General Ambient Air Analyzer Procedures

D3266 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)

D3267 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)

D3268 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)

D3270 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)

D3464 Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer

D3608 Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction

D3609 Standard Practice for Calibration Techniques Using Permeation Tubes

D3614 Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions

D3631 Standard Test Methods for Measuring Surface Atmospheric Pressure

D3685/D3685M Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases

D3686 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)

D3687 Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method

D3796 Standard Practice for Calibration of Type S Pitot Tubes

D3824 Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method

D4096 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)

D4185 Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry

D4230 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer

D4298 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability

D4413 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology)

D4430 Standard Practice for Determining the Operational Comparability of Meteorological Measurements

D4490 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes

D4532 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers

D4597 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers

D4599 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters

D4600 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres

D4765 Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes

D4766 Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)

D4844 Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection

D4856 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)

D4861 Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air

D4913 Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors

D5011 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards

D5012 Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition

D5015 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination

D5075 Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air

D5085 Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography

D5086 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry

D5096 Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer

D5110 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry

D5111 Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations

D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products

D5149 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence

D5156 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)

D5157 Standard Guide for Statistical Evaluation of Indoor Air Quality Models

D5197 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)

D5280 Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions

D5281 Standard Test Method for Collection and Analysis of Hexavalent Chromium in Ambient Atmospheres

D5314 Standard Guide for Soil Gas Monitoring in the Vadose Zone

D5337 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps

D5438 Standard Practice for Collection of Floor Dust for Chemical Analysis

D5466 Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)

D5527 Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means

D5578 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)

D5741 Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer

D5791 Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings

D5835 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations

D5836 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)

D5932 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace

D5952 Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)

D5953M Standard Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric)

D5955 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM

D6011 Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer

D6056 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy

D6057 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy

D6058 Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment

D6059 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

D6060 Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph

D6061 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers

D6062 Standard Guide for Personal Samplers of Health-Related Aerosol Fractions

D6176 Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors

D6177 Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets

D6178 Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets

D6196 Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air

D6209 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)

D6216 Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications

D6245 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

D6246 Standard Practice for Evaluating the Performance of Diffusive Samplers

D6271 Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol

D6281 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)

D6306 Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air

D6327 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter

D6328 Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition

D6329 Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers

D6330 Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions

D6331 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)

D6332 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors

D6333 Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors

D6345 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air

D6348 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy

D6363 Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method

D6399 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins

D6420 Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry

D6480 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy

D6485 Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets

D6494 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction

D6522 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers

D6552 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols

D6561 Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace

D6562 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace

D6589 Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance

D6620 Standard Practice for Asbestos Detection Limit Based on Counts

D6669 Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints

D6670 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products

D6735 Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources—Impinger Method

D6784 Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)

D6785 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry

D6803 Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers

D6831 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

D6832 Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide

D6877 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace

D6966 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

D7034 Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations

D7035 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7049 Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres

D7143 Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products

D7144 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination

D7145 Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means

D7200 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy

D7201 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)

D7202 Standard Test Method for Determination of Beryllium in the Workplace Using Field-Based Extraction and Optical Fluorescence Detection

D7295 Standard Practice for Sampling and Determination of Hydrogen Cyanide (HCN) in Combustion Effluents and Other Stationary Sources

D7296 Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds

D7297 Standard Practice for Evaluating Residential Indoor Air Quality Concerns

D7339 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography

D7392 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants

D7439 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

D7440 Standard Practice for Characterizing Uncertainty in Air Quality Measurements

D7441 Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples

D7459 Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources

D7520 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere

D7659 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection

D7663 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

D7706 Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers

D7707 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust

D7712 Standard Terminology for Sampling and Analysis of Asbestos

D7859 Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers

E104 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions

E337 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)

E800 Standard Guide for Measurement of Gases Present or Generated During Fires

E884 Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities

E1370 Standard Guide for Air Sampling Strategies for Worker and Workplace Protection

E1620 Standard Terminology Relating to Liquid Particles and Atomization

E1749 Standard Terminology Relating to Rigid Wall Relocatable Shelters

E1972 Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment

E1998 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances

E2114 Standard Terminology for Sustainability Relative to the Performance of Buildings

E2144 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres

E2148 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety

E2267 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality

E2523 Standard Terminology for Metalworking Fluids and Operations

E2693 Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment

F50 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles

F1977 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System

F2299/F2299M Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres

Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.